The script will be used for tuning Intel GPU frequency to maximize
performance tests execution, while also trying to reduce throttling,
which has a negative impact on results consistency.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15662>
For every CI job, put JWT content into a file and unset CI_JOB_JWT
environment var
=======
* virgl jobs:
- Share JWT token file to crosvm instance
- Keep using `export -p` due to high complexity in the scripts
of these jobs. At least, the CI_JOB_JWT will not be leaked,
since it is being unset at the `before_script` phase of each
Mesa CI job.
* iris jobs: Update lava_job_submitter to take token file as argument
- generate-env with CI_JOB_JWT_TOKEN_FILE
- create token file during baremetal init stage
* baremetal jobs: Copy token file to bare-metal NFS
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14004>
Reusing this for LAVA sounds like a good idea!
Signed-off-by: Daniel Stone <daniels@collabora.com>
Acked-by: Martin Peres <martin.peres@mupuf.org>
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11337>
Whilst we want to reuse the same init and job environment for LAVA and
bare-metal, LAVA needs to additionally inject wget and tar jobs, so we
can actually get our per-job environment, as the rootfs we run in is
just the container-generated base rootfs.
Split the init script into two stages, with the first stage doing very
base bringup of devices and networking, and the second stage setting the
job environment and running the jobs.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Acked-by: Martin Peres <martin.peres@mupuf.org>
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11337>
Make both LAVA and bare-metal untar into $CI_PROJECT_DIR/install/, and
symlink /install/ to it during init.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Acked-by: Martin Peres <martin.peres@mupuf.org>
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11337>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Acked-by: Martin Peres <martin.peres@mupuf.org>
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11337>
Use Piglit's replay profile to measure and store the time that frames
take to render in the GPU.
This job won't run automatically in regular pipelines, but will be
triggered automatically by a script for every successful pre-merge
pipeline.
This is because we want to generate performance data for every relevant
commit merged in main, but we don't want to keep a device busy during
the pre-merge run.
Signed-off-by: Antonio Caggiano <antonio.caggiano@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-By: Rohan Garg <rohan.garg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7987>
Finally LAVA users will be able to see deqp XMLs on failures from the
job's artifacts browser. This replaces a couple of one-off minio uploads
in the piglit runner.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10297>
Getting piglit to fit onto our test devices was proving difficult, and we
need the ability to handle flakes, so switch to the rust piglit runner
that @pepp wrote as part of the deqp-runner repo which gives us flake
detection, sharding across boards, fractional runs, and almost half the
runtime.
It doesn't handle piglit subtests yet, but if you can't run piglit's
python on your devices because it's too bloated and unstable, this is a
way forward.
Reviewed-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9468>
This allows to split a piglit job in several parallel jobs, to speed up
the execution.
Due piglit restrictions, this only works for single profiles. Otherwise
an error will be shown in the runner.
Also, a new gitlab job variable `PIGLIT_TESTS` is introduced that
contains the excluded/included tests with `-x` or `-n`. The rest of the
piglit options go to `PIGLIT_OPTIONS` (like `--timeout n`).
v2 (Andres):
- Replay profile is supported in parallel jobs.
- Bail out inmediately if parallel jobs is tried with multiple
profiles.
- Use testlist only when doing parallel jobs.
- Do not drop pass tests when filtering executed tests.
- Get rid of PIGLIT_FRACTION.
v4:
- uncommit unrelated change (Andres).
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9022>
We have to disable the GLSL unit tests because with asan it runs way too
much code under qemu and times out. Those unit tests have coverage on
x86, anyway.
I also included a vulkan run, which is disabled by default due to timeouts
that I need to sort out still. It should be a useful tool for turnip
devs, though.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9070>
We are now using pages.
v2:
- Define a helper variable for the artifacts base URL (Juan).
Signed-off-by: Andres Gomez <agomez@igalia.com>
Acked-by: Eric Anholt <eric@anholt.net> [v1]
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9092>
When loading Vulkan ICD file, it uses the CPU machine identifier to
load the correct one, in case multiple versions are installed.
This is fine if the machine where Mesa has been built and the machine
where the test is run are exactly the same. But this is not always the
case. As example, for armhf architecture, the machine where Mesa is
built is identified as `arm7hlf`, but the Raspberry Pi 4 is identified
as `armv7l`, so it will fail to load the ICD file, though both are
totally compatible.
This allow to define the architecture instead.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8745>
3 commits in 0.5.0:
- 20-40s savings on many of our CI runs by dropping the clever test size
scaling code.
- Even bigger savings (especially on deqp-vk runs) by increasing maximuim
test group size (~1/4 of runtime was spawning deqp on cheza, that cost
is cut by ~75%)
- No more needing to manually set MESA_DEBUG=silent
2 commits in 0.5.1:
- Fixed automatic thread pool sizing to keep all CPUs busy (thanks for
catching that Bas!).
- Automatically size down test groups on short test lists and many CPUs,
so split the list evenly between CPUs (such as on freedreno -options
jobs).
Acked-by: Daniel Stone <daniel@fooishbar.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8787>
We were using surfaceless, which misses out on some useful coverage we'd
like to have in the GLX/EGL piglit tests, but more importantly prevented
many traces from running.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8727>
The gitlab artifacts handling has been slow in the past as we hit
gitlab.fdo from multiple runners, and it costs fd.o egress bandwidth. Use
the local http cache against the packet.net minio to cut that downloads
cost.
Closes: #3249
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8727>
I've set it up in the gitlab-runer config on all the freedreno boards.
This means that for piglit, where the run.sh always choose either this
variable or 4 threads otherwise, we'll have the right number of parallel
tasks.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7370>
v2:
- Squashed the commit to remove tracie jobs (Eric).
v3:
- Rename *-piglit-traces jobs with *-traces (Eric).
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6388>
When introducing/removing these files, it's easy to forget to update the
yml to point to them. Instead of requiring the separate update, just have
the runner script pick the right one from a single per-gpu variable.
As a result, we now pick up the new deqp-lvp-skips.txt that was added but
not conected. This also required moving some bypass flakes from the
shared a630 flakes list to a separate list, which is a feature because now
we'd notice the introduction of flakes to the gmem path.
Fixes: ab79e6b8e3 ("ci: skip failing test on lavapipe")
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8147>
This tests OpenGL ES 2.0 CTS suite with VC4 drivers, through baremetal
Raspberry Pi 3 devices.
The devices are connected to a switch that supports Power over Ethernet
(PoE), so the devices can be started/stopped through the switch, and
also to a host that runs the GitLab runner through serial-to-USB cables,
to monitor the devices to know when the testing finishes.
The Raspberries uses a network boot, using NFS and TFTP. For the root
filesystem, they use the one created in the armhf container. For the
kernel/modules case, this is handled externally. Currently it is using
the same kernel/modules that come with the Raspberry Pi OS. In future we
could build them in the same armhf container.
At this moment we only test armhf architecture, as this is the default
one suggested by the Raspberry Pi Foundation. In future we could also
add testing for arm64 architecture.
Finally, for the very rare ocassions where the Raspberry Pi 3 device is
booted but no data is received, it retries the testing for a second
time, powering off and on the device in the process.
v2:
- Remove commit that exists capture devcoredump (Eric)
- Squash remaining commits in one (Andres)
v3:
- Add missing boot timeout check (Juan)
v4:
- Use locks when running the PoE on/off script (Eric)
- Use a timeout for serial read (Eric)
v5:
- Rename stage to "raspberrypi" (Eric)
- Bump up arm64_test tag (Eric)
v6:
- Make serial buffer timeout optional (Juan)
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7628>
To increase our VK coverage on a630, we want to have two jobs in parallel,
but we still can't hit full coverage so we need the fractional setting to
be separate from gitlab CI's flags for setting up parallel jobs.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6971>
I found the C++ runner hard to develop on, and we had stability issues and
outstanding feature needs that made me want something I felt good about
hacking on. Thus, Rewrite It In Rust of the deqp runner.
The new runner includes:
- Skip lists don't reshuffle the test list.
- Known-flake handling without resorting to skip lists (fixing our main CI
reliability issue on a3xx right now).
- Per-thread Vulkan shader caches should speed up VK CI runtime.
- Tracking of crashes separate from fails (so we can see progress on that
front).
- Logging of deqp stderr spam (particularly assertion failures!) in the CI
log.
- Integrated QPA filtering so we don't have bash perf issues for it.
- Logging of what caselist to go look at for a given error report (in red,
so it's easier to find in your CI log).
- The code is 1/3 unit tests, and easy to extend for more coverage.
- Non-LAVA CI runs create a failures.csv in artifacts that you can check
in as your deqp-*-fails.txt file.
- Test runtime is included in results.csv so you can debug how to speed up
your CI job.
- Pretty summary at the end of the run of slow/flaky/failed tests.
Since this is a new runner with a different RNG, the test groups are
shuffled one more time. This seems to result in some panfrost T720
stability issues (See its new deqp-panfrost-t720-flakes.txt), and one new
flake in freedreno a630.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7434>
So far, we've been putting our known flakes that intermittently fail CI
into the skips list. This has two downsides:
1) You don't know when the flakes stop happening and when to delist them
from skips, unless you go do a bunch of manual runs with the skips list
cleared.
2) If the flake was because the previous test left some broken state in
the HW, you may just move your intermittent to a new test.
With this new path, you can list your flakes in the flakes file to keep
them from erroring out people's pipelines. They still get run and
reported as is.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6392>
Eric Anholt identified the issue when merging one of my MRs: the
variable contained words in '`' backticks, which caused them to be
executed by the bare metal runner's shell.
Quote the value printed using bash's shell expansion feature to make
sure anything in the future will be properly quoted.
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6389>
The previous code considered unset variables the same as set-but-empty;
sometimes setting a variable as something empty is meaningful, so let's
pass them through properly.
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6389>
As drivers have been tested with more and more traces, the yml file is
becoming a bit unwieldy. As more drivers are going to be tested with
traces, and more traces will be used, split them in per-driver files so
the size stays manageable.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Reviewed-By: Rohan Garg <rohan.garg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6185>
Baremetal jobs filter the variables they get from .gitlab-ci.yml, and
TRACIE_UPLOAD_TO_MINIO and others weren't being let through.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Fixes: d4ca45eca2 ("ci: Upload traces' reference and actual images to MinIO")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6171>
Connor recently ran into an issue where the chezas were hanging where his
GPUs weren't, and was blocked on getting some feedback on what was
happening. A devcoredump will help non-cheza-having devs debug (or
hopefully with other intermittent fails).
Closes: #3187
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6036>
This job runs in about one minute on the current set of traces, and has
successfully revealed some bugs in our current rendering. Takes about 7
minutes currently.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5433>
We've already uploaded and downloaded them from fd.o and put them in the
rootfs, so we can clean up the extra prep work.
Our test job now extends from .test so that the artifacts' install dir
with all the scripts is extracted. This required moving the dependency on
meson-testing to the x86 test-gl/test-vk job blocks.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5393>
rm -rf and then copying over all the contents again is a waste of time
when we'll almost always be using the same rootfs. Saves about 30s of job
time.
Closes: #3065
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5266>
Test 1/50th of the CTS on a630 pre-merge, since we've got hardware that
can do it and infrastructure that should handle instability with a
less-mature driver.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5266>
This will let us:
- deploy kernels for testing code depending on new kernel featuers
- Ensure a pristine state in the HW before starting our tests
- Avoid disk rot on the chezas taking them out (we'd lost 3/9 in a few
months).
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5247>
Cristian Ciocaltea
Guilherme Gallo
Daniel Stone
Antonio Caggiano
Rob Clark
Juan A. Suarez Romero
Eric Anholt
Andres Gomez
Christian Gmeiner
Eric Engestrom
Tomeu Vizoso