Applications may query the back buffer age to efficiently perform
partial updates. Generally the application will keep a fixed length
damage history, and use this to calculate what needs to be redrawn
based on the age of the back buffer it's about to render to.
If presented with a buffer that has an age greater than the
length of the damage history, the application will likely have
to completely repaint the buffer.
Our current buffer selection strategy is to pick the first available
buffer without considering its age. If an application frequently
manages to fit within two buffers but occasionally requires a third,
this extra buffer will almost always be old enough to fall outside
of a reasonably long damage history, and require a full repaint.
This patch changes the buffer selection behaviour to prefer the oldest
available buffer.
By selecting the oldest available buffer, the application will likely
always be able to use its damage history, at a cost of having to
perform slightly more work every frame. This is an improvement if
the cost of a full repaint is heavy, and the surface damage between
frames is relatively small.
It should be noted that since we don't currently trim our queue in
any way, an application that briefly needs a large number of buffers
will continue to receive older buffers than it would if it only ever
needed two buffers.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Factor out and rework the existing code so that it prints a debug
message if we have zero configs for any visual.
As a nice side effect we now provide a correct (sequential ID) when
creating a config (via dri2_add_config).
v2: Use correct comparison in loop conditional (Eric)
Use valid C initializer (Gurchetan)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Introduce a helper and use it throughout the platform code. This allows
us to reduce the amount of ifdef(s) and (potentially) use
kms_swrast_dri.so for !drm platforms (namely wayland and x11).
Note: in the future as other platforms (android, surfaceless) support
the extension they can reuse the helper.
v2: Rebase, check for device_name.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
All the platforms are duplicating what should be a driver/dri2 thing -
refcounting. Just fold it accordingly.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
v2: make fence extension optional to not break non-i965 classic
drivers, and move __DRI2_FENCE into core extensions, based
on comments from Emil
Signed-off-by: Rob Clark <robdclark@gmail.com>
The device name is only needed for WL_bind_wayland_display so make this clear
by only storing the device name when Wayland support is built.
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Avoid use-after-free on error.
Fixes: 9ee683f877 (egl/dri2: Add reference count for dri2_egl_display)
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Tested-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
In preparation to add public map/unmap functions, rename the existing
gbm_dri_bo_{map,unmap} functions to indicate that they are only for dumb
buffers.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
dri3 for EGL will use different struct other than dri2_egl_surface for
an EGL surface, the common code only uses __DRIdrawable from that
struct, so instead of converting _EGLSurface to dri2_egl_surface, let
the platform code return the __DRIdrawable by its own (although the
current platforms use the same function).
v2: From Martin Peres
- convert to the new drawable interface (Kristian)
Signed-off-by: Boyan Ding <boyan.j.ding@gmail.com>
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.co.uk>
No driver changes needed for softpipe/llvmpipe - things just work.
v2: Whitespace fixes.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Boyan Ding <boyan.j.ding@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Move the fcntl(dupfd_cloexec) to the else branch where it belongs.
Otherwise it's not immediately obvious that the code is hit, only when
an existing device is used.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Boyan Ding <boyan.j.ding@gmail.com>
v2: [Emil Velikov]
Rework the error path to a common goto, close only if we own the fd.
v3; [Emil Velikov]
Always close the fd (we either opened the device or dup'd) (Boyan, Ian)
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Boyan Ding <boyan.j.ding@gmail.com>
mesa/src/egl/drivers/dri2/platform_drm.c: In function 'release_buffer':
mesa/src/egl/drivers/dri2/platform_drm.c:73:18: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
for (i = 0; i < ARRAY_SIZE(dri2_surf->color_buffers); i++) {
^
mesa/src/egl/drivers/dri2/platform_drm.c: In function 'has_free_buffers':
mesa/src/egl/drivers/dri2/platform_drm.c:87:18: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
for (i = 0; i < ARRAY_SIZE(dri2_surf->color_buffers); i++)
^
mesa/src/egl/drivers/dri2/platform_drm.c: In function 'dri2_drm_destroy_surface':
mesa/src/egl/drivers/dri2/platform_drm.c:199:18: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
for (i = 0; i < ARRAY_SIZE(dri2_surf->color_buffers); i++) {
^
mesa/src/egl/drivers/dri2/platform_drm.c: In function 'get_back_bo':
mesa/src/egl/drivers/dri2/platform_drm.c:224:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
for (i = 0; i < ARRAY_SIZE(dri2_surf->color_buffers); i++) {
^
mesa/src/egl/drivers/dri2/platform_drm.c: In function 'dri2_drm_swap_buffers':
mesa/src/egl/drivers/dri2/platform_drm.c:425:24: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
for (i = 0; i < ARRAY_SIZE(dri2_surf->color_buffers); i++)
^
Signed-off-by: Rhys Kidd <rhyskidd@gmail.com>
Reviewed-by: Thomas Helland <thomashelland90@gmail.com>
Free the memory for dri2_surf in the unlikely case that one provides
NULL for native_window. Also set the relevant EGL_ERROR to provide
feedback to the user.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We've moved the open with CLOEXEC idiom into a helper function, so
call it instead of duplicating the code.
This also replaces a couple of opens that didn't properly do CLOEXEC.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Replacing dup() with fcntl F_DUPFD_CLOEXEC creates the duplicate
file descriptor with CLOEXEC so it won't be leaked to child
processes if the process fork()s later.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Currently these files are including it indirectly via eglcompiler.h
The latter of which will be removed with follow up commits.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
This fixes piglit when using PIGLIT_PLATFORM=gbm
Tom Stellard:
- Fix ARGB2101010 format
Cc: "10.4 10.5" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>
This is part of the EGL spec, and is useful for a tiled renderer to avoid
the memory bandwidth cost of storing the depth/stencil buffers.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
This changes enables EGL_KHR_image_pixmap in the egl drm platform, which is implemented
there but has not been advertised yet.
Cc: 10.2 10.3 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Andreas Pokorny <andreas.pokorny@canonical.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
As explained in the previous commit, we want to avoid the possibility of
integer-multiplication overflow while allocating buffers.
In these two cases, the final allocation size is the product of three values:
one variable and two that are fixed constants at compile time.
In this commit, we move the explicit multiplication to involve only the
compile-time constants, preventing any overflow from that multiplication, (and
allowing calloc to catch any potential overflow from the remainining implicit
multiplication).
Reviewed-by: Matt Turner <mattst88@gmail.com>
The kms-dri swrast driver cannot share buffers using the GEM,
so it must tell the loader to disable extensions relying on
that, without disabling the image DRI extension altogether
(which would prevent the loader from working at all).
This requires a new gallium capability (which is queried on
the pipe_screen and for swrast drivers it's forwarded to the
winsys), and requires a new version of the DRI image extension.
[Emil Velikov]
- Rebased on top of gallium-dri megadrivers.
- Drop PIPE_CAP_BUFFER_SHARE and sw_winsys::get_param hook.
The can_share_buffer cap is set at InitScreen. We use a different
InitScreen (and thus value for the cap) function for kms_dri, due to
deeper differences originating from dri megadrivers.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Turn GBM into a swrast loader (providing putimage/getimage backed
by a dumb KMS buffer). This allows to run KMS+DRM GL applications
(such as weston or mutter-wayland) unmodified on cards that don't
have any client side HW acceleration component but that can do
modeset (examples include simpledrm and qxl)
[Emil Velikov]
- Fix make check.
- Split dri_open_driver() from dri_load_driver().
- Don't try to bind the swrast extensions when using dri.
- Handle swrast->CreateNewScreen() failure.
- strdup the driver_name, as it's free'd at destruction.
- s/LIBGL_ALWAYS_SOFTWARE/GBM_ALWAYS_SOFTWARE/
- Move gbm_dri_bo_map/unmap to gbm_driiint.h.
- Correct swrast fallback logic.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Originally all hardware drivers duplicate the driver_name string
from an external source, while for the software rasterizer we set
it to "swrast". Follow the example set by hw drivers this way
we can free the string at dri2_terminate().
v2: Use strdup over strndup. Suggested by Ilia Mirkin.
v3: Handle platform_drm in a similar manner. Cleanup swrast
driver_name in error path.
Cc: Chia-I Wu <olv@lunarg.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Chromium defined a new GL extension (that isn't registered with Khronos).
We need to add an EGL extension for it, so we can migrate ChromeOS on
Intel systems to use EGL instead of GLX.
http://git.chromium.org/gitweb/?p=chromium/src/third_party/khronos.git;a=commitdiff;h=27cbfdab35c601f70aa150581ad1448d0401f447
The EGL_CHROMIUM_sync_control extension is similar to the GLX extension
OML_sync_control, but only defines one function,
eglGetSyncValuesCHROMIUM, which is equivalent to glXGetSyncValuesOML.
http://www.opengl.org/registry/specs/OML/glx_sync_control.txt
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: Jamey Sharp <jamey@minilop.net>
Cc: Ian Romanick <idr@freedesktop.org>
Cc: Stéphane Marchesin <stephane.marchesin@gmail.com>
Don't hardcode /dev/dri/card0 but instead use the drm
macros which allows the correct /dev/drm0 device to be
opened on OpenBSD.
v2: use snprintf and fallback to /dev/dri/card0
v3: check for snprintf truncation
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
From the EGL_MESA_platform_gbm spec, version 5:
It is not valid to call eglCreatePlatformPixmapSurfaceEXT with a <dpy>
that belongs to the GBM platform. Any such call fails and generates
EGL_BAD_PARAMETER.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Internally, much of the EGL code uses EGLNativeDisplayType,
EGLNativeWindowType, and EGLPixmapType. However, the EGLNative type
often does not match the variable's actual type.
The concept of EGLNative types are a bad match for Linux, as explained
below. And the EGL platform extensions don't use EGLNative types at all.
Those extensions attempt to solve cross-platform issues by moving the
EGL API away from the EGLNative types.
The core of the problem is that eglplatform.h can define each EGLNative
type once only, but Linux supports multiple EGL platforms.
To work around the problem, Mesa's eglplatform.h contains multiple
definitions of each EGLNative type, selected by feature macros. Mesa
expects EGL clients to set the feature macro approrpiately. But the
feature macros don't work when a single codebase must be built with
support for multiple EGL platforms, *such as Mesa itself*.
When building libEGL, autotools chooses the EGLNative typedefs based on
the first element of '--with-egl-platforms'. For example,
'--with-egl-platforms=x11,drm,wayland' defines the following:
typedef Display* EGLNativeDisplayType;
typedef Window EGLNativeWindowType;
typedef Pixmap EGLNativePixmapType;
Clearly, this doesn't work well for Wayland and GBM. Mesa works around
the problem by casting the EGLNative types to different things in
different files.
For sanity's sake, and to prepare for the EGL platform extensions, this
patch removes from egl/main and egl/dri2 all internal use of the
EGLNative types. It replaces them with 'void*' and checks each explicit
cast with a static assertion. Also, the patch touches egl_gallium the
minimal amount to keep it compatible with eglapi.h.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add dri2_egl_display_vtbl::create_image, set it for each platform, and
let egl_dri2 dispatch eglCreateImageKHR to that.
To remove ambiguity, rename egl_dri2.c:dri2_create_image() to
dri2_create_image_from_dri().
This prepares for the EGL platform extensions.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add dri2_egl_display_vtbl::create_wayland_buffer_from_image, set it for
each platform, and let egl_dri2 dispatch
eglCreateWaylandBufferFromImageWL to that.
This prepares for the EGL platform extensions.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add dri2_egl_display_vtbl::post_sub_buffer, set it for each
platform, and let egl_dri2 dispatch eglPostSubBufferNV to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add dri2_egl_display_vtbl::swap_buffers_region, set it for each
platform, and let egl_dri2 dispatch eglSwapBuffersRegionNOK to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add dri2_egl_display_vtbl::copy_buffers, set it for each
platform, and let egl_dri2 dispatch eglCopyBuffers to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add dri2_egl_display_vtbl::query_buffer_age, set it for each
platform, and let egl_dri2 dispatch API.QueryBufferAge to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add dri2_egl_display_vtbl::destroy_surface, set it for each
platform, and let egl_dri2 dispatch eglDestroySurface to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add dri2_egl_display_vtbl::create_pbuffer_surface, set it for each
platform, and let egl_dri2 dispatch eglCreatePbufferSurface to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add dri2_egl_display_vtbl::create_pbuffer_surface, set it for each
platform, and let egl_dri2 dispatch eglCreatePixmapSurface to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add dri2_egl_display_vtbl::create_window_surface, set it for each
platform, and let egl_dri2 dispatch eglCreateWindowSurface to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add dri2_egl_display_vtbl::swap_buffers_with_damage, set it for each
platform, and let egl_dri2 dispatch eglSwapBuffersWithDamageEXT to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add dri2_egl_display_vtbl::swap_buffers, set it for each platform, and
let egl_dri2 dispatch eglSwapBuffers to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Add dri2_egl_display_vtbl::swap_interval, set it for each platform, and
let egl_dri2 dispatch eglSwapInterval to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Each of the egl_dri2 platforms (except Android) prefix their function
names with "dri2", not "dri2_${platform}". This means many function
names have three separate definitions in the egl_dri2 directory: one in
each of platform_drm.c, platform_wayland.c, and platform_x11.c. For
example, each of the three files defines dri2_create_window_surface().
The name collisions make it difficult to review patches for correctness
("Is this patch hunk calling a platform_x11 function or a global
egl_dri2 function?"), complicate debugging, and confuse code navigation
tools.
For each function in platform_x11.c prefixed with 'dri2', this patch
changes its prefix to 'dri2_x11'. Likewise for platform_drm.c and
'dri2_drm'; and platform_wayland.c and 'dri2_wl'.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
dri2_egl_display has only one virtual function, 'authenticate'. Define
dri2_egl_display::vtbl and move 'authenticate' there.
This prepares for the EGL platform extensions, which will add many
more virtual functions to dri2_egl_display.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This lets us allocate color buffers as __DRIimages and pass them into
the driver instead of having to create a __DRIbuffer with the flink
that requires.
With this patch, we can now run gbm on render-nodes. A render-node is a
drm device that doesn't support modesetting and all the legacy DRI ioctls.
flink is also not supported, but now that gbm doesn't need flink, we can
run piglit on head-less gbm or head-less GPGPU.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: "10.0" <mesa-stable@lists.freedesktop.org>
Derek Foreman
Marek Olšák
Emil Velikov
Rob Clark
Frank Binns
Nicolas Boichat
Rob Herring
Boyan Ding
Emil Velikov
Matt Turner
Rhys Kidd
Daniel Stone
Eric Anholt
Lionel Landwerlin
Andreas Pokorny
Carl Worth
Giovanni Campagna
Sarah Sharp
Jonathan Gray
Chad Versace
Kristian Høgsberg