Only needed when the CS path is used.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This uses the new kernel interfaces for reduced cs overhead,
We only set the local flag for memory allocations that don't have
a dedicated allocation and ones that aren't imports.
v2: add to all the internal buffer creation paths.
v3: missed some command submission paths, handle 0/empty bo lists.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When binding a new pipeline, we applied all dynamic states
without checking if they really need to be re-emitted. This
doesn't seem to be useful for the meta operations because only
the viewports/scissors are updated.
This should reduce the number of commands added to the IB
when a new graphics pipeline is bound.
Also, rename radv_dynamic_state_copy() to radv_bind_dynamic_state()
and set the dirty flags directly there.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
The depth bounds test values are either set at pipeline
creation or dynamically using vkCmdSetDepthBounds().
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
radeonsi only emits these when dfsm is enabled, so for now
just hinge them on a flag we never set.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
With merged shaders the vertex shader may not exist. This got in
because the offending patch was written before merged shaders were
upstream, but committed after.
Fixes: 75dfab24a2 'radv: refactor indirect draws with radv_draw_info'
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Otherwise for non-indexed draws we set and immediately unset
RADV_CMD_DIRTY_INDEX_BUFFER. As all the set functions should
clear their own bit, this is unnecessary.
Fixes: 341529dbee 'radv: use optimal packet order for draws'
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
As they were emitted after the new pipeline, the changed pipeline
detection was not working anymore.
Fixes: 341529dbee 'radv: use optimal packet order for draws'
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Ported from RadeonSI. The time where shaders are idle should
be shorter now. This can give a little boost, like +6% with
the dynamicubo Vulkan demo.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The Vulkan specification says:
"... an execution dependency with only VK_PIPELINE_STAGE_TOP_OF_-
PIPE_BIT in the source stage mask will effectively not wait for
any prior commands to complete."
Signed-off-by: Fredrik Höglund <fredrik@kde.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Indirect draws with a count buffer will be refactored in a
separate patch.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Similar to the dispatch compute logic but for draw calls. For
convenience, indirect draws will be converted in a separate
patch.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Only on CIK and later. We should only update VGT_INDEX_TYPE but
it seems easier to re-emit all the index buffer packets.
Fixes: 966d66f28f (radv: do not re-emit the index buffer for every draw call)
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This will allow us to fix the VGT_INDEX_TYPE issue properly.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
To be consistent with the emit function name.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
CLEAR_STATE will initialize DB_COUNT_CONTROL to 0 for CIK+.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This fixes some access to the tess eval shader when it's combined
with geometry on gfx9.
This is a review of Bas's commit:
radv: Prevent crashing by accessing TES for VGT reuse depth.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Move it to radv_cmd_buffer_flush_state() because if
rasterizerDiscardEnable is true, the flags are not cleared.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
It can only be changed when CmdBindIndexBuffer() is called
or when a secondary buffer is used. Though not always, but
let's re-emit the packets in this situation for now.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This saves few CPU cycles when CmdDrawIndexed() is used a lot.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Missed that when I allowed waves to be launched out-of-order.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The spec requires the number of buffer to be greater than 0.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This saves some useless CMASK initializations/eliminations in
the Vulkan SSAO demo.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
My guess is that the GPU is going to report VM faults if
vkCmdDrawIndirectCountAMD() (and friends) are used.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
These registers don't change during the lifetime of the
command buffer, there is no need to re-emit them when
binding a new pipeline.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Ported from RadeonSI, and -pro seems to enable it as well.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
We only need to dirty the descriptors when the pipeline is
a new one, because user SGPRs can be potentially different.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
To check a valid usage requirement.
CID: 1401616
Signed-off-by: Mun Gwan-gyeong <elongbug@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
The number of viewports/scissors can only be specified at pipeline
creation time, so make sure to copy them when binding a new one
because the dynamic state is cleared in BeginCommandBuffer().
Fixes: dcf46e995d ("radv: do not update the number of scissors in vkCmdSetScissor()")
Fixes: 60878dd00c ("radv: do not update the number of viewports in vkCmdSetViewport()")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
We are really not going to use a winsys which does not need to store
the va, so might as well store it in a standard field.
Not sure this helps perf much though, as most of the cost is in the
cache miss accessing the bo anyway, which we stil need to do.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Since most games use only a few, iterating through all of them is
a waste. Simplifies the code too.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
The Vulkan spec (1.0.61) says:
"The number of scissors used by a pipeline is still specified
by the scissorCount member of VkPipelinescissorStateCreateInfo."
So, the number of scissors is defined at pipeline creation
time and shouldn't be updated when they are set dynamically.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
The Vulkan spec (1.0.61) says:
"The number of viewports used by a pipeline is still specified
by the viewportCount member of VkPipelineViewportStateCreateInfo."
So, the number of viewports is defined at pipeline creation
time and shouldn't be updated when they are set dynamically.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Also, it's useless to set the error code twice. Though, we
should probably skip the next commands when the command buffer
is considered invalid.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
To dump them when a hang is detected.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
To improve GPU hangs detection when shaders are stucked.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
To share common code after every draw/compute calls.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
When a GPU hang is detected in radv_gpu_hang_occured() we know
which command buffer is faulty but the bound pipelines might
have been updated during the execution.
The pointers to the radv_pipeline objects are emitted just
after the second trace ID, that way it would be easy to dump
the active shaders at the moment of the hang.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Per the spec:
"Resetting a command buffer is an operation that discards any
previously recorded commands and puts a command buffer in the
initial state."
As far I'm concerned, that flag can be changed by calling
VkCmdPushConstants() (or any other functions which update it),
so it should be cleared as well.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
To be consistent with radv_emit_compute_pipeline().
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reduce size of radv_pipeline.c and improve code isolation. More
code can probably moved but it's a start.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
malloc() failures are unrelated to the device memory.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
A return code error is stored in the command buffer and should
be returned to the user via EndCommandBuffer().
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
In my opinion, this improves code readability.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Just to make sure we are using the set 0, because it's the
only one which is saved/restored when doing meta operations.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This fixes some observed hangs on CIK GPUs.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Useless to track which one has been updated because we
re-upload all the vertex buffers in one shot.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
malloc() failures are unrelated to the device memory.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Otherwise, the simultaneous uage bit doesn't get set from the begin
info, which we need for batchchaining.
Fixes: f4e499ec79 "radv: add initial non-conformant radv vulkan driver"
Reviewed-by: Dave Airlie <airlied@redhat.com>
This will allow to propagate VK_ERROR_OUT_OF_HOST_MEMORY to
vkEndCommandBuffer() when necessary.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Recording secondaries with no framebuffer attachment may
make this happen, though this might not be the complete solution.
(esp if someone does meta stuff in there, would we have to
save things, not sure).
Fixes: f4e499ec79 ("radv: add initial non-conformant radv vulkan driver")
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
GFX9 needs the SX MRT blend registers programmed, port over
the code from radeonsi to workout the values from the blend
state, and program the registers on rbplus systems.
This fixes lots of:
dEQP-VK.pipeline.blend.*
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
For the GFX9 packet we need one more dword.
Fixes an assert in:
dEQP-VK.draw.shader_draw_parameters.base_vertex.draw_indexed
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fixes disabled Z/stencil.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is also a GFX9 register.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This seems like a workaround, but we don't see the bug on CIK/VI.
On SI with the dEQP-VK.memory.pipeline_barrier.host_read_transfer_dst.*
tests, when one tests complete, the first flush at the start of the next
test causes a VM fault as we've destroyed the VM, but we end up flushing
the compute shader then, and it must still be in the process of doing
something.
Could also be a kernel difference between SI and CIK.
v2: hit this with a bigger hammer. This fixes a bunch of hangs
in the vk cts with the robustness tests.
Fixes: f4e499ec79 ("radv: add initial non-conformant radv vulkan driver")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101334
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This reduces the number of BOs that we need for the BO lists during
a submission.
Currently uses a fairly simple linear search for finding free space,
that could eventually be improved to a binary tree, which with some
per-node info could make a check for space O(1) and finding it O(log n),
in the number of buffers in that slab.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This just sets them to INVALID COLOR, instead of shifting the
attachments together.
This also fixes a number of cases where we use it first and only
then check if it is VK_ATTACHMENT_UNUSED.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Fixes: f4e499ec79 "radv: add initial non-conformant radv vulkan driver"
Reviewed-by: Dave Airlie <airlied@redhat.com>
Samuel Pitoiset
Dave Airlie
Bas Nieuwenhuizen
Fredrik Höglund
Timothy Arceri
Marek Olšák
Gwan-gyeong Mun
David Airlie
Nicolai Hähnle