When a texture is immutable, we can't tack on extra levels
after-the-fact like we could with glTexImage. So check against that
level limit and return an error if it's surpassed.
This fixes:
KHR-GL45.geometry_shader.layered_fbo.fb_texture_invalid_level_number
(Based on a patch by Ilia Mirkin.)
Reviewed-by: Antia Puentes <apuentes@igalia.com> [imirkin v2]
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This approach allows drivers to set their own vertex shader and skip
compilation of u_blitter vertex shaders.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This is a new interface in libva2 to support wider use-cases of passing
surfaces to external APIs. In particular, this allows export of NV12 and
P010 surfaces.
v2: Convert surfaces to progressive before exporting them (Christian).
v3: Set destination rectangle to match source when converting (Leo).
Add guards to allow building with libva1.
Signed-off-by: Mark Thompson <sw@jkqxz.net>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-and-Tested-by: Leo Liu <leo.liu@amd.com>
The intrinsic is gone, causing shader compilation to crash.
While here, also change the fallback code to match what llvm's auto-updater
of these intrinsics would do (except that there will still be zext/trunc
instructions in there), which should ensure that the sequence gets recognized
and fused back into a pabs in the end (I didn't test this, and it's possible
even the old sequence would get recognized, but I don't see a reason why we
shouldn't use the same sequence in any case).
Tested-by: Vinson Lee <vlee@freedesktop.org>
Causing a crash in ParaView waveletcontour.py test when
_DEBUG defined due to vector aligned copy with unaligned
address.
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
This ensures that everything gets cleaned up properly. In particular,
it fixes a memory leak where we were leaking the push constants
structs.
Valgrind stats on
dEQP-VK.pipeline.push_constant.graphics_pipeline.range_size_128 :
Before:
HEAP SUMMARY:
in use at exit: 2,467,513 bytes in 1,305 blocks
total heap usage: 697,853 allocs, 696,530 frees, 138,466,600 bytes allocated
LEAK SUMMARY:
definitely lost: 1,068 bytes in 11 blocks
indirectly lost: 24,669 bytes in 412 blocks
possibly lost: 0 bytes in 0 blocks
still reachable: 2,441,776 bytes in 882 blocks
suppressed: 0 bytes in 0 blocks
After:
HEAP SUMMARY:
in use at exit: 2,467,381 bytes in 1,304 blocks
total heap usage: 697,853 allocs, 696,531 frees, 138,466,600 bytes allocated
LEAK SUMMARY:
definitely lost: 936 bytes in 10 blocks
indirectly lost: 24,669 bytes in 412 blocks
possibly lost: 0 bytes in 0 blocks
still reachable: 2,441,776 bytes in 882 blocks
suppressed: 0 bytes in 0 blocks
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "17.2 17.1" <mesa-stable@lists.freedesktop.org>
When writing to set > 0, we were just wrongly writing to set 0. This
commit fixes this by lazily allocating each set as we write to them.
We didn't go for having them directly into the command buffer as this
would require an additional ~45Kb per command buffer.
v2: Allocate push descriptors from system memory rather than in BO
streams. (Lionel)
Cc: "17.2 17.1" <mesa-stable@lists.freedesktop.org>
Fixes: 9f60ed98e5 ("anv: add VK_KHR_push_descriptor support")
Reported-by: Daniel Ribeiro Maciel <daniel.maciel@gmail.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This change introduce the concept of planes for image & views. It
matches the planes available in new formats.
We also refactor depth & stencil support through the usage of planes
for the sake of uniformity. In the backend (genX_cmd_buffer.c) we have
to take some care though with regard to auxilliary surfaces.
Multiplanar color buffers can have multiple auxilliary surfaces but
depth & stencil share the same HiZ one (only store in the depth
plane).
v2: by Jason
Remove unused aspect parameters from anv_blorp.c
Assert when attempting to resolve YUV images
Drop redundant logic for plane offset in make_surface()
Rework anv_foreach_plane_aspect_bit()
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
A good chunk of anv_blorp just wants the aux usage from the image. This
magic aux_usage value means just that.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This pass implements all the implicit conversions required by the
VK_KHR_sampler_ycbcr_conversion specification.
It also inserts plane sources onto sampling instructions that we then
let the pipeline layout pass deal with, when mapping things correctly
to descriptors.
v2: Add new file to meson build (Lionel)
Use nir_frcp() rather than (1.0f / x) (Jason)
Reuse nir_tex_instr_dest_size() rather than handwritten one (Jason)
Return progress (Jason)
Account for array of samplers (Jason)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
New settings from the KHR_sampler_ycbcr_conversion specifications
might require different sampler settings for luma and chroma planes.
This change makes the sampler table emission ready to handle multiple
planes.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Adding new downsampling factors for each planes.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
A given Vulkan format can now be decomposed into a set of planes. We
now use 'struct anv_format_plane' to represent the format of those
planes.
v2: by Jason
Rename anv_get_plane_format() to anv_get_format_plane()
Don't rename anv_get_isl_format()
Replace ds_fmt() by fmt2()
Introduce fmt_unsupported()
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Newer format enums start at offset 1000000000, making it impossible to
have them all in one table. This change splits the formats into sets
that we then access through indirection.
v2: rename format_extract to vk_to_anv_format (Chad/Jason)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This will allow use to merge the compute save/restore helpers.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
And merge radv_meta_save_novertex() with
radv_meta_save_graphics_reset_vport_scissor_novertex().
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This will allow us to save/restore the different states on-demand
based on the meta operation. For now, this saves/restores all
states. Compute will follow once the graphics part is done.
The main idea is to merge all save/restore helpers.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Change b3a44ae7a4 caused regressions on Android where DRI and renderbuffer
can disagree on the format being used. This patch removes the colorspace
parameter and instead we pass renderbuffer format. For non-winsys images we
still do srgb/linear modification in same manner as change b3a44ae7a4 wanted
but take format from renderbuffer instead of DRI image.
This patch fixes regressions seen with following test sets:
dEQP-EGL.functional.color_clears*
dEQP-EGL.functional.render*
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102999
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Kenneth Graunke
Marek Olšák
Mark Thompson
Roland Scheidegger
Tim Rowley
Lionel Landwerlin
Jason Ekstrand
Samuel Pitoiset
Tapani Pälli