Normally, we rely on nir_lower_outputs_to_temporaries to create shadow
variables for outputs, buffering the results and writing them all out
at the end of the program. However, this is infeasible for tessellation
control shader outputs.
Tessellation control shaders can generate multiple output vertices, and
write per-vertex outputs. These are arrays indexed by the vertex
number; each thread only writes one element, but can read any other
element - including those being concurrently written by other threads.
The barrier() intrinsic synchronizes between threads.
Even if we tried to shadow every output element (which is of dubious
value), we'd have to read updated values in at barrier() time, which
means we need to allow output reads.
Most stages should continue using nir_lower_outputs_to_temporaries(),
but in theory drivers could choose not to if they really wanted.
v2: Rebase to accomodate Jason's review feedback.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Similar to nir_load_per_vertex_input, but for outputs. This is not
useful in geometry shaders, but will be useful in tessellation shaders.
v2: Change stage_uses_per_vertex_outputs() to is_per_vertex_output(),
taking a nir_variable (requested by Jason Ekstrand).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
This was introduced in GLSL IR after NIR development had branched.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Geometry and tessellation shaders process multiple vertices; their
inputs are arrays indexed by the vertex number. While GLSL makes
this look like a normal array, it can be very different behind the
scenes.
On Intel hardware, all inputs for a particular vertex are stored
together - as if they were grouped into a single struct. This means
that consecutive elements of these top-level arrays are not contiguous.
In fact, they may sometimes be in completely disjoint memory segments.
NIR's existing load_input intrinsics are awkward for this case, as they
distill everything down to a single offset. We'd much rather keep the
vertex ID separate, but build up an offset as normal beyond that.
This patch introduces new nir_intrinsic_load_per_vertex_input
intrinsics to handle this case. They work like ordinary load_input
intrinsics, but have an extra source (src[0]) which represents the
outermost array index.
v2: Rebase on earlier refactors.
v3: Use ssa defs instead of nir_srcs, rebase on earlier refactors.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
This is a common enough operation that it's nice to not have to think about
the arguments to foreach_list_typed every time.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Not something actually hit in real life (now state is never non-null,
but only case state->syms is null is if nir_print_instr() path). But it
was something I overlooked the first time, so might as well fix it.
*** CID 1324642: Null pointer dereferences (REVERSE_INULL)
/src/glsl/nir/nir_print.c: 299 in print_var_decl()
293
294 fprintf(fp, " (%s, %u)", loc, var->data.driver_location);
295 }
296
297 fprintf(fp, "\n");
298
>>> CID 1324642: Null pointer dereferences (REVERSE_INULL)
>>> Null-checking "state" suggests that it may be null, but it has already been dereferenced on all paths leading to the check.
299 if (state) {
300 _mesa_set_add(state->syms, name);
301 _mesa_hash_table_insert(state->ht, var, name);
302 }
303 }
304
Signed-off-by: Rob Clark <robclark@freedesktop.org>
v2: split out moving of FILE *fp into state structure into it's own
(more complete patch) to reduce the noise in this one
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Rename print_var_state to print_state, and stuff FILE ptr into the state
object. This avoids passing around an extra parameter everywhere.
v2: even more extensive conversion.. use state *everywhere* instead of
FILE ptr, and convert nir_print_instr() to use state as well
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Previously, NIR would just print 4 swizzle components if the swizzle was
anything other than foo.xyzw. This creates lots of noise if, for example,
you have a one-component element with a swizzle of foo.xxxx.
Reviewed-by: Kenneth Grunke <kenneth@whitecape.org>
We never did a single hash table lookup in the entire NIR code base that I
found so there was no real benifit to doing it that way. I suppose that
for linking, we'll probably want to be able to lookup by name but we can
leave building that hash table to the linker. In the mean time this was
causing problems with GLSL IR -> NIR because GLSL IR doesn't guarantee us
unique names of uniforms, etc. This was causing massive rendering isues in
the unreal4 Sun Temple demo.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Being able to see both location and driver_location can be useful when
debugging IO mistakes.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Nothing actually uses these, and the only caller of glsl_to_nir()
(brw_fs_nir.cpp) always passes NULL for the _mesa_glsl_parse_state
pointer, meaning they'll always be NULL and 0, respectively.
Just delete them.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Printing instructions doesn't modify them, so we can mark the parameter
const.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
It's nice to have this present in your default cases so you can see what
instruction is triggering an abort.
v2: Just pass a NULL state, now that it won't crash when you do.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Previously, the set API required the user to do all of the hashing of keys
as it passed them in. Since the hashing function is intrinsically tied to
the comparison function, it makes sense for the hash set to know about
it. Also, it makes for a somewhat clumsy API as the user is constantly
calling hashing functions many of which have long names. This is
especially bad when the standard call looks something like
_mesa_set_add(ht, _mesa_pointer_hash(key), key);
In the above case, there is no reason why the hash set shouldn't do the
hashing for you. We leave the option for you to do your own hashing if
it's more efficient, but it's no longer needed. Also, if you do do your
own hashing, the hash set will assert that your hash matches what it
expects out of the hashing function. This should make it harder to mess up
your hashing.
This is analygous to 94303a0750 where we did this for hash_table
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This solves a number of problems. First is the ability to change the
number of sources that a texture instruction has. Second, it solves the
delema that may occur if a texture instruction has more than 4 sources.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
parallel_copy_copy was a silly name. Also, things were getting long and
annoying, so I added a foreach macro. For historical reasons, several of
the original iterations over parallel copy entries in from_ssa used the
_safe variants of the loop. However, all of these no longer ever remove an
entry so it's ok to make them all use the normal iterator.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
As it was, we weren't ever using load_const in a non-SSA way. This allows
us to substantially simplify the load_const instruction. If we ever need a
non-SSA constant load, we can do a load_const and an imov.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
We stopped generating predicates in glsl_to_nir some time ago. Right now,
it's all dead untested code that I'm not convinced always worked in the
first place. If we decide we want them back, we can revert this patch.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
In particular, we rename nir_tex_src_sampler_index to _sampler_offset and
add a sampler_array_size field to nir_tex_instr. This way we can pass the
size of sampler arrays through to backends even after removing the variable
information and, with it, the type.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
This commit renames nir_instr_as_texture to nir_instr_as_tex and renames
nir_instr_type_texture to nir_instr_type_tex to be consistent with
nir_tex_instr.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Previously, we used a string name. It was nice for translating out of GLSL
IR (which also does that) but cumbersome the rest of the time.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
These indices should now be reasonably stable/consistent. Redoing the
indices in the print functions makes it harder to debug problems.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>