"Driver" isn't a great word for what this layer is, it's effectively a
build-time choice about what OS you're targeting. Despite that both of
the extant backends totally ignore the display argument, the old code
would only set up the backend relative to a display.
That causes problems! One problem is it means eglGetProcAddress can
generate X or Wayland protocol when it tries to connect to a default
display so it can call into the backend, which is, you know, completely
bonkers. Any other EGL API that doesn't reference a display, like
EGL_EXT_device_query, would have the same issue.
Fortunately this is a problem that can be solved with the delete key.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This uses all the existing code to calculate lod values for mip linear
filtering. Though we'll have to disable the simplifications (if we know some
parts of the lod calculation won't actually matter for filtering purposes due
to mip clamps etc.). For better or worse, we'll also disable lod calculation
hacks (mostly should make a difference for cube maps) always - the issue with
per-pixel lod being difficult is mostly because we then have different mipmaps
needed for the actual texel fetch, which isn't a problem with lodq.
We still use approximation for the log2 - for that reason I believe the float
part of the lod is only accurate to about 4-5 bits (and one bit less with 1d
textures actually) which is hopefully good enough (though d3d10 technically
requires 6 bits - could use quadratic interpolation instead of linear to get
8 bits or so).
Since lodq requires unclamped lod, we also have to move some sampler key
calculations to texture sampling code - even if we know we're going to access
mipmap 0 we still have to calculate lod and apply lod_bias for lodq.
Passes piglit ARB_texture_query_lod tests (after having fixed the test).
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Fixes: 6a8aa11c20 "st/omx_bellagio: Rename state tracker and option"
Cc: Gurkirpal Singh <gurkirpal204@gmail.com>
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Jason and I use this for debugging all the time. Recompiling the driver
to enable it is kind of annoying. It's a great thing to try along with
always_flush_batch=true and always_flush_cache=true to detect a class of
problems - namely, atoms listening to an insufficient set of dirty bits.
Reviewed-by: Matt Turner <mattst88@gmail.com>
When a batch is submitted, INTEL_DEBUG=bat prints a message indicating
which part of the code triggered the flush, and some statistics about
the batch/state buffer utilization.
It also decodes the batchbuffer in debug builds...which is so much
output that it drowns out the utilization messages, if that's all you
care about.
INTEL_DEBUG=submit now just does the utilization messages.
INTEL_DEBUG=bat continues to do both (as the message is a good indicator
that we're starting decode of a new batch).
v2: Rename from "flush" to "submit" (suggested by Chris) because we
might want "flush" for PIPE_CONTROL debugging someday.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Support for external egl drivers was dropped a few years ago.
Fixes: 209360bbb9 "egl/main: drop support for external egl drivers"
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Instead of setting based on set/unset, allow users to use boolean values.
In the docs and tests, use `DISABLE=true` instead of `DISABLE=1` as it's
clearer IMO.
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Instead of setting based on set/unset, allow users to use boolean values.
In the docs, use `NO_DRAWARRAYS=true` instead of `NO_DRAWARRAYS=1` as it's
clearer IMO.
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Instead of setting based on set/unset, allow users to use boolean values.
In the docs, use `DISABLE=true` instead of `DISABLE=1` as it's clearer IMO.
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Instead of setting based on set/unset, allow users to use boolean values.
In the docs, use `ALWAYS=true` instead of `ALWAYS=1` as it's clearer IMO.
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Instead of setting based on set/unset, allow users to use boolean values.
In the docs, use `ALWAYS=true` instead of `ALWAYS=1` as it's clearer IMO.
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This was implemented since forever, but not enabled.
It passes all piglit tests except one, arb_pipeline_statistics_query-frag.
The reason is that the test (for drawing a 10x10 rect) expects between
100 and 150 pixel shader invocations. But since llvmpipe counts this with
4x4 granularity (and due to the rect being 2 tris) we end up with 224
invocations. I believe however what llvmpipe is doing violates neither the
spirit nor the letter of the spec (our fragment shader granularity really
is 4x4 pixels, albeit we will bail out early on 2x2 or 4x2 (the latter
if AVX is available) granularity), the spec allows to count additional
invocations due to implementation reasons.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
I changed the behaviour earlier today, but forgot to update the
corresponding docs.
Fixes: 77713a0acb "mesa: allow user to set MESA_NO_ERROR=0"
Suggested-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
v2: Correct 17.1.10 version, adjust some names.
v3: Add missing <tr> (Andres)
Cc: Juan A. Suárez <jasuarez@igalia.com>
Cc: Andres Gomez <agomez@igalia.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> (v1)
Use consistent way to manage "non-default" llvm installations, clearly
documenting it.
AKA, use LLVM_CONFIG throughout and unset for the Windows/mingw builds.
v2: unset the save_ variable (Andres)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> (v1)
One can control the number of jobs via MAKEFLAGS. As such there's
little reason to set the number of jobs for each make invocation.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Juan A. Suarez Romero <jasuarez@igalia.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Completed the 17.2 cycle and added the beginning of the 17.3 one.
v2: Add 17.2-rc6 as tentative final version to be promoted to 17.2.0
final (Eric).
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Juan A. Suarez Romero <jasuarez@igalia.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Semantically identical to the EXT version (whose string is still valid
for GLES), so rename the bit but expose both extension strings.
(Suggested by Ilia Mirkin and Ian Romanick.)
v3: Fix the entrypoint alias in GL4x.xml (Ilia)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
The only difference from the EXT version is bumping the minmax to 16, so
just hit all the drivers at once.
v2: Fix driver names, add to 17.3 release notes (Ilia Mirkin)
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Outdated, features.txt is used instead.
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Intel has a Jenkins setup and has made the various scripts and
documentation open source.
https://github.com/janesma/mesa_jenkins
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This is an unoffical unmaintained driver, we don't really want
people wasting effort trying to improve it.
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>