This job is really small and it shouldn't hurt to cover two more
generations. This will prevent breaking the world on GFX6-GFX7
because we don't regularly test these chips.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4873>
This lets us get coverage of corner cases of the driver that are tricky to
force a testcase to hit. We don't want to do a full run of the CTS with
each option because that's a lot of runner time, so stack a bunch of
fractional runs in one test job to amortize the test run setup overhead.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4621>
It's easy to get something wrong in the driver build or container or
something that results in falling back to swrast, and then your only clue
was runtime and how your failure cases suspiciously match a swrast
driver's.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4621>
We always want to see status updates happening in the logs, otherwise it
can like maybe your machine hung until the run actually completes.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4621>
We haven't had it enabled due tointermittent failures. Those failures
are, as far as I can tell, due to GPU faults from buffer overflows where a
failing test in a thread stomps an otherwise passing thread's buffers. By
running deqp single-threaded, we can get more consistent failures, at the
cost of needing to do a tiny subset of the tests to keep runtime down.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4685>
Additionally, purge the winehq-stable package and its dependencies to
avoid crashing when building for s390x.
v2:
- Remove winehq-stable and dependencies for s390x.
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2657
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Daniel Stone <daniels@collabora.com> [v1]
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4678>
Add virglrenderer to the container and use the vtest transport to test
the Gallium driver. On the "host", llvmpipe is used.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4433>
An update seems to have poisoned gitlab-runner, and it can no longer
resolve DNS even though the host system can.
Disable this until we can figure out what's going on.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4589>
Verify that the Mesa version used when running tracie tests is the
one that was built by CI, rather than any installed distro version.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3894>
Without this, the .test-manual jobs could end up as 'when: manual' when
the jobs they depend on were 'when: never', which was flagged as
invalid YAML, preventing the pipeline from being created.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4522>
MR pipelines not triggered by Marge Bot can still be triggered manually.
Motivation: The main & forked Mesa project CI pipelines combined are
currently generating over 1 TB of egress traffic per week. ~80% of this
is from pre-merge pipelines. Assuming this corresponds to 4 pre-merge
and one post-merge pipeline per MR on average, this change could
potentially eliminate up to ~60% of the overall traffic (by preventing
3 of the 4 pre-merge pipelines from running automatically).
(Of course, this could be subverted if all jobs of the other pipelines
were triggered manually anyway... In most cases, manually triggering
just a few jobs should suffice)
v2:
* $GITLAB_USER_NAME was the wrong variable, $GITLAB_USER_LOGIN should
do the trick.
Suggested-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4432>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4432>
Let them run automatically once all their dependencies have passed.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4432>
To avoid confusion with `paths:` elements.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4432>
Our shared runners are set up for concurrent jobs ~= CPUs / 4 (x86) or 8
(ARM). If you use more build processes than that, then jobs may be
fighting each other for shared system resources, possibly to the point of
failure (we've seen one of the runners OOM on some jobs before, though I'm
not sure if this was the cause).
To try to systematically prevent the problem, we make a ninja wrapper in
the containers that passes the -j flags, and set MAKEFLAGS in the
container builds. This doesn't cover make in non-container builds, but I
believe we don't have any of those.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3782>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3782>
This prunes out all targets except libgl-gdi, libgl-xlib, and svga, as
suggested by Marek Olšák.
libgl-xlib will be remove once I have had time to confirm no automated
tests we have rely upon it.
There are also a bunch of Makefile.sources which become orphaned as
result, that are not taken care of in this change.
v2: Prune remainders of swr support.
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4348>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4348>
The .fdo.container-ifnot-exists template has been replaced by
.fdo.container-build.
We need to include "debian/" in FDO_REPO_SUFFIX for now, we can drop it
for individual images when their tags are bumped if we want.
Miscellaneous other goodies this gets us:
* The templates now add some labels to images which may be useful for
garbage collecting unused tags in the future.
* The templates now copy the current tag from the main project
registry to the forked project's if it already exists in the latter
but points to a different image hash. This will avoid false failures
(or passes) due to using the wrong image.
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4286>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4286>
In preparation for having automated testing with DXGI traces.
v2:
- Updated DXVK version.
- Merged the new Wine container into the existing Vulkan
one (Michel).
v3:
- Updated commit log.
- Use a particular known-good apitrace version (Alexandros).
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4238>
The backports repository can be temporarily inconsistent between
architectures, which can break the docker image build.
Suggested-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4238>
Adds a native build of Mesa using Meson with the Visual Studio 2019
toolchain on a Windows host.
Though Docker is supported on Windows, Docker-in-Docker is not possible,
nor are podman and skopeo available. We handle this by creating the
container from a shell-executor Windows machine, which gives us a native
PowerShell that we can execute Docker from. This attempts to do the same
copy-from-upstream-or-create-if-not-exists optimisation as the
ci-templates do for our Linux builds, albeit open-coded in PowerShell.
The Mesa build itself is executed inside a container, using Meson and
Ninja.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Jose Fonseca <jfonseca@vmware.com>
Acked-by: Brian Paul <brianp@vmware.com>
Acked-by: Eric Engestrom <eric@engestrom.ch>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4304>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4304>
Currently, we store the kernel and ramdisk for each LAVA job in the
artifacts of the job that built them. Because artifacts are stored in
GCE and LAVA labs aren't, this causes a lot of egress with is expensive.
To avoid this, have runners download most of the data via the (cached)
container images once, and for each job upload the kernel and ramdisk to
a server outside GCE.
Right now we only have Collabora's runner with a local web server, so
jobs that go to Baylibre's lab have been disabled.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4295>
There's some files from the .gitlab-ci directory that are needed in the
test stage and that, because the Mesa repository isn't checked out in
that stage, need to be made available through other means.
Because those files are going to be needed in LAVA devices, place them
ino the tarball containing the built files so it's available to both
gitlab-ci runners and LAVA devices.
Before those files were passed in the artifacts of the Gitlab CI job,
but this commit places them into the built tarball so scripts later in
the pipeline don't need to account for this discrepancy.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4295>
After 90a39af5f6 ("ci: Drop the git dependency in tracie"), we have
this error in the radv-polaris10-traces job:
"
...
+ /builds/tanty/mesa/artifacts/tracie/tests/test.sh
tracie_succeeds_if_all_images_match: Fail
Traceback (most recent call last):
File "/tmp/tracie.test.glY0O23HJo/tracie.py", line 6, in <module>
import requests
ModuleNotFoundError: No module named 'requests'
...
"
v2:
- Updated commit log to be more descriptive (Michel).
Fixes: 90a39af5f6 ("ci: Drop the git dependency in tracie")
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4237>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4237>
I think we want to cover these 3 generations at the barely minimum.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4082>
Following on from the db410c conversion to baremetal testing, reuse the
same scripts in the same rack to run 7 db820c boards (#4/8 is failing in
the bootloader for unknown reasons).
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4177>
The motivation is to allow llvmpipe to be enabled instead in the
meson-i386 job.
v2: (Eric Engestrom)
* Rename meson-main job to meson-gallium
* Remove stale comment above meson-i386 job
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4166>
Instead of using git, use python and the Gitlab API
to fetch traces. This helps us slim down our ramdisks
in preparation for integrating trace replay on LAVA
devices.
Signed-off-by: Rohan Garg <rohan.garg@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4000>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4000>
This supports powering up the device (using an external tool you
provide based on your particular lab), talking over serial to wait for
the fastboot prompt, and then booting a fastboot image on a target
device.
I was previously relying on LAVA for this, but that ran afoul of
corporate policies related to the AGPL. However, LAVA wasn't doing
too much for us, given that gitlab already has a job scheduler and
tagging and runners. We were spending a lot of engineering on making
the two systems match up, when we can just have gitlab do it directly.
Lightly-reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4076>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4076>
It was added with tracie, but it doesn't depend on it.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
For now tests only use these drivers:
* llvmpipe
* softpipe
* freedreno
* lima
* etnaviv
* panfrost
So using rules:changes gitlab feature to run the tests when the changes
made are potentially affecting these drivers.
A few notes:
* the following code:
.piglit-test:
extends:
- .test-gl
- .llvmpipe-rules
makes gitlab replace .test-gl "rules:changes" values by the one from
".llvmpipe-rules".
* rules:changes always matches for non-MR new branches so jobs will always be
created (and they'll be run if their dependencies are run). For pushes to
existing branches the files changed by the push are used to match the
rules:changes path.
* the same gitlab feature could be used for some build jobs
Acked-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2569>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2569>
RADV_FORCE_FAMILY forces creating a null device that allows RADV
to be instanced without AMDGPU.
The Fossilize database only contains pipelines from the Sascha
Vulkan triangle demos at the moment. I will add more once this
is merged.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3960>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3960>
It was diabled because RADV is the only driver that tests Vulkan
and running CTS on my personal machine and without recovery is
not safe enough for CI (too long and too unstable).
Now that we are going to test Fossilize with RADV, it's needed to
build the test image for VK unconditionally. As RADV now supports
creating NULL devices, the fossilize jobs can run everywhere.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3960>
Fossilize is equivalent to vkpipeline-db but it's definitely more
robust. This is based on the CI traces system.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3960>
The stages and mapping of jobs to them are somewhat arbitrary; the goal
is to avoid having to scroll through large numbers of jobs.
v2: (Pierre-Eric Pelloux-Prayer)
* Use even more stages for test jobs
* Give somewhat meaningful names to stages
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3995>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3995>
Also, adds an example job for radv.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
In preparation to having "vk" (Vulkan) along "gl" (OpenGL/ES).
This is so it is clearer which traces belong to which API and also for
the build jobs.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
In preparation for having automated testing with Vulkan traces.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
In preparation for having automated testing with Vulkan traces.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Since we are at it, replace "cd" with pushd / popd and homogenize how
VK-GL-CTS is built in comparison with other build scripts.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
This should get us better stability of the db410c boards by having a
smaller per-board software stack, with no disks involved (just initramfs).
Additionally, the new cluster is 7 (soon 8) db410cs, while currently the
docker cluster only has 1/4 of its db410cs still running.
Unfortunately, we have to prepare the fastboot boot image during the ARM
drivers build stage, because LAVA relies on publicly available URLs for
the images to load into the bootloaders of the boards, and the only thing
we have for that is gitlab's artifacts.
Note that this testing relies on the boards being freshly flashed with the
linaro v136 firmware to pick up the initramfs size fixes and to stop the
boot at fastboot.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3661>
I want to make sure that I don't introduce warnings in turnip where we
have active work going on, and I also want to make sure that the drivers
we care about testing are warnings-clean.
As with the previous -Werror change, this is for CI only and doesn't
affect end-user builds.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3607>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3607>
I'm working on moving the db410c CI from docker to LAVA, which means we
get to boot a custom kernel. To do that, we need to enable ARCH_QCOM in
the kernel, save the dtb around, and include abootimg in our container so
that we can generate combined kernel/dtb/ramdisk images for fastboot.
LAVA's fastboot support is unable to pack the overlay into an abootimg
image, just a cpio rootfs. We could flash the cpio rootfs after overlay
addition, but that takes 2 minutes to do, and causes wear on the devices.
Instead, we'll bring up the network at boot and use wget to fetch the
overlay. We'll want network support anyway, so that we can transfer the
failure xmls back to the gitlab job's artifacts at some point.
Since the msm GPU and realtek network firmware increase our payload by
3MB, add in firmware compression so that it doesn't waste as much RAM on
devices not using it.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3928>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3928>
The LLVM libraries were a significant fraction of the entire payload
(55M/250M uncompressed) into the initramfs of the test boards, but
LLVM is only used for the draw module used in select/feedback (which
isn't even tested in CI on ARM yet).
Assume that llvmpipe draw is safe enough for ARM given the coverage on
x86, and disable LLVM for these jobs.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3928>
radv needs libllvm which increases our ramdisk size
significantly. Since this driver is only build tested,
we can split it out into a separate job.
Signed-off-by: Rohan Garg <rohan.garg@collabora.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3928>
LAVA finds a '#' early in boot and races to emit its shell commands.
Apparently for the current boards those serial commands end up getting
buffered such that things work out, but for db410c and db820c, the buffer
is lost and LAVA gets stuck waiting for the prompt. By setting a prompt,
we can delay our commands until we're actually supposed to emit them (and
suppress a complaint from the lava dispatcher that we're using a risky
prompt!)
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3883>
Introduce automated testing of Mesa by replaying traces with Renderdoc
or Apitrace.
For now only LLVMPipe is tested, but other drivers can be tested if
there's runners with the necessary hardware.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2935>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2935>
Using LLVM 8 for ppc64el and 7 for s390x (which hits some coroutine
related issues with LLVM 8).
There are some test failures we need to ignore for now. Also, the
timeout needs to be bumped from the default 30s for some tests, because
they can take longer under emulation.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3643>
Among other things, this increases robustness when copying a docker
image from the main Mesa project to a forked project, avoiding spurious
image rebuilds from scratch.
Also drop the comment about .gitlab-ci/lava-gitlab-ci.yml, it doesn't
include the templates anymore.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3643>
I find warnings to be very disruptive to my workflow (using emacs's "go to
next error" feature), and I periodically have to go clean up other
people's drivers to get back to finding my own warnings in the noise. I
know I'm not the only one doing something like this.
We don't want to enable -Werror by default in builds, since it means that
end users will have builds spuriously fail based on what compiler version
and opt flags they have compared to what the devs are using. However, it
is quite easy to have CI ensure that we at least don't introduce warnings
on the compiler version that it uses.
For now I've just enabled it on meson-i386 to cover a bunch of Mesa core
and get us started on ratcheting up warnings-cleanliness in the tree,
without me having to fix up all the drivers at once.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3539>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3539>
They were causing trouble with Marge Bot: The project settings require
that the pipeline succeeds before a merge request (MR) can be merged,
otherwise Marge doesn't wait for the pipeline to succeed before merging
an MR assigned to her. But Marge can't start manual jobs, so she would
always time out waiting for pipelines with manual jobs.
To avoid this, use these rules:
* Run the pipeline by default for MRs and main project branches changing
any files affecting it.
* For other MRs, run a single dummy job which always succeeds.
* Don't run any jobs for main project branch changes (e.g. from an MR
having been merged) not affecting the pipeline.
* Allow jobs to be started manually on branches of forked projects, as
before.
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3361>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3361>
Use the normal build job to also prepare the artifacts for LAVA jobs.
For that, the build container needs to also build the test suites,
kernel, ramdisk, etc.
Then the build job will place the just-built Mesa in the ramdisk and the
test job can generate a LAVA job and point to those artifacts.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3295>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3295>
They're not available for Debian buster yet, so we have to use upstream
snapshot packages again.
In contrast to earlier, we now store the LLVM APT repository key in Git
instead of re-downloading it every time.
Take one step towards sharing code between the LAVA and non-LAVA jobs,
with the goals of reducing maintenance burden and use of computational
resources.
The env var DEQP_NO_SAVE_RESULTS allows us to skip the procesing of the
XML result files, which can take a long time and is not useful in the
LAVA case as we are not uploading artifacts anywhere at the moment.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>