Emit PA_SU_POLY_OFFSET_DB_FMT_CNTL with rasterizer poly_offset states.
This will be useful to implement
PIPE_CAP_POLYGON_OFFSET_UNITS_UNSCALED.
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
D3D9 has a different behaviour for depth bias.
For OGL/D3D1X, the depth bias unit is the
minimal resolvable value for the depth buffer,
which depends on the format (and has different
behaviour for float depth buffers).
For D3D9, the depth bias unit is 1.0f.
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We recently had a mistake where we emitted SEND instructions with EOT
set, but from g107 rather than g112-g127. Adding validation code should
prevent these sorts of problems from slipping back in.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
These only exist post-Sandybridge, and always use send-from-GRF.
So inst->base_mrf will be -1, and we will have already returned 0.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
These are now unnecessary, as base_mrf is -1 by default.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
On MRF platforms, we need to set base_mrf to the first MRF value we'd
like to use for the message. On send-from-GRF platforms, we set it to
-1 to indicate that the operation doesn't use MRFs.
As MRF platforms are becoming increasingly a thing of the past, we've
forgotten to bother with this. It makes more sense to set it to -1 by
default, so we don't have to think about it for new code.
I searched the code for every instance of 'mlen =' in brw_fs*cpp, and
it appears that all MRF-based messages correctly program a base_mrf.
Forgetting to set base_mrf = -1 can confuse the register allocator,
causing it to think we have a large fake-MRF region. This ends up
moving the send-with-EOT registers earlier, sometimes even out of
the g112-g127 range, which is illegal. For example, this fixes
illegal sends in Piglit's arb_gpu_shader_fp64-layout-std430-fp64-shader,
which had SSBO messages with mlen > 0 but base_mrf == 0.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The old return type of GLuint was wonky - it should have been bool.
But nothing actually uses the return value anyway, so we can just drop
that and make it a void function.
In theory, it might make sense to ask whether the texture validated
successfully, but just checking intel_obj->mt != NULL works for that.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
brw_tex.c is a tiny file containing a single function. It's closely
tied to the validation logic in intel_tex_validate.c, so it makes sense
to put both in the same file.
While we're at it, update the function to our modern style.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
ported from Vulkan (and no source explains why this is needed)
Cc: 12.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
We were ignoring the incoming box parameters, and were providing totally
bogus stride/layer stride, and other bits, for when a non-full-surface
map was requested.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Tested-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Cc: <mesa-stable@lists.freedesktop.org>
Under some circumstances, the driver may choose to return a temporary
surface instead of a pointer to the original. Make sure to pass the
actual view volume to be mapped to the transfer function rather than
adjusting the map pointer after-the-fact.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
It will be removed from the firmware for the Polaris.
Cc: 12.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The non-MULTI variants will be removed in Polaris firmware.
Cc: 12.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Fixes an error introduced in commit 3948cd3797.
Reported-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
- make sure FP32 denormals will stay disabled in LLVM in the future
(the current default is disabled)
- tell LLVM that FP64 denormals are enabled
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
v2: Merge with PIPE_SHADER_CAP_DOUBLES
Add CHIP_HEMLOCK
v3: only set the instruction on EG and CM
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Checking "signalled" is first done without a mutex, then with a mutex.
Also, checking without waiting doesn't lock the mutex. This is racy, but
should be safe.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Since the OpenGLES API is strict about the internal format matching
the for many operations, we need to preserve it.
See _mesa_es3_error_check_format_and_type in
src/mesa/main/glformats.c.
Fixes ES2-CTS.gtf.GL2ExtensionTests.egl_image.egl_image
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96351
Reported-by: Mark Janes <mark.a.janes@intel.com>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kristian Høgsberg <krh@bitplanet.net>
Cc: Chad Versace <chad.versace@intel.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Chad Versace <chad.versace@intel.com>
Will be needed for resolving auxiliary surfaces.
I didn't add anv_render_pass_attachment::stencil_store_op, as the driver
would likely never use it, as stencil surfaces never have auxiliary
surfaces.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Clean up misrepetitions ('if if', 'the the' etc) found throughout the
comments. This has been done manually, after grepping
case-insensitively for duplicate if, is, the, then, do, for, an,
plus a few other typos corrected in fly-by
v2:
* proper commit message and non-joke title;
* replace two 'as is' followed by 'is' to 'as-is'.
v3:
* 'a integer' => 'an integer' and similar (originally spotted by
Jason Ekstrand, I fixed a few other similar ones while at it)
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>
We currently use CL_INVOCATION_COUNT for the GL_PRIMITIVES_GENERATED
query, which involves passing all primitives to the clipper. When
rasterizer discard is enabled, we program the clipper in REJECT_ALL
mode, rather than using the SOL stage's "Rendering Disable" feature.
See commit f09b91f782 for an explanation
of why we implement GL_PRIMITIVES_GENERATED this way.
Apparently the SOL stage's "Rendering Disable" feature is a lot faster
than having the clipper reject all primitives. It's safe to use when
no GL_PRIMITIVES_GENERATED query is active, as we don't care about
CL_INVOCATION_COUNT incrementing.
This patch makes us use SO_RENDERING_DISABLE when no query is active,
but continues falling back to the clipper in REJECT_ALL mode when the
queries are enabled. It brings back the perf_debug for the clipper
case (which I removed in commit 1f9445ff57, thinking it wasn't useful).
Improves performance in Gl32GSCloth by 84.8303% +/- 2.07132% (n = 10)
on my Broadwell GT2 laptop.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
They're basically the same. Let's avoid the code duplication.
v2: Fix SO_BUFFER_ENABLE stuff to only happen on Gen < 8 (caught
by Jason Ekstrand).
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Constant propagation on arrays doesn't make a lot of sense. If the
array is only accessed with constant indexes, then opt_array_splitting
would split it up. Otherwise, we have variable indexing. If there's
multiple accesses, then constant propagation would end up replicating
the data.
The lower_const_arrays_to_uniforms pass creates uniforms for each
ir_constant with array type that it encounters. This means that it
creates redundant uniforms for each copy of the constant, which means
uploading too much data. It can even mean exceeding the maximum number
of uniform components, causing link failures.
We could try and teach the pass to de-duplicate the data by hashing
constants, but it makes more sense to avoid duplicating it in the first
place. We should promote constant arrays to uniforms, then propagate
the uniform access.
Fixes the TressFX shaders from Tomb Raider, which exceeded the maximum
number of uniform components by a huge margin and failed to link.
On Broadwell:
total instructions in shared programs: 9067702 -> 9068202 (0.01%)
instructions in affected programs: 10335 -> 10835 (4.84%)
helped: 10 (Hoard, Shadow of Mordor, Amnesia: The Dark Descent)
HURT: 20 (Natural Selection 2)
loops in affected programs: 4 -> 0
The hurt programs appear to no longer have a constarray uniform, as
all constants were successfully propagated. Apparently before this
patch, we successfully unrolled a loop containing array access, but
only after promoting constant arrays to uniforms. With this patch,
we unroll it first, so all array access is direct, and the array
is split up, and individual constants are propagated. This seems
better.
Cc: mesa-stable@lists.freedesktop.org
Reported-by: Karol Herbst <nouveau@karolherbst.de>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
There's really no point in looking at ir_dereference_array of a
constant. It also misses cases like:
(assign () (var_ref tmp) (constant (array ...) ...))
No changes in shader-db, but keeps it working after the next commit.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Axel Davy
Jordan Justen
Kenneth Graunke
Marek Olšák
Ilia Mirkin
Nicolai Hähnle
Francesco Ansanelli
Jan Vesely
Chad Versace
Gurkirpal Singh
Eric Engestrom
Giuseppe Bilotta
Brian Paul