Gallium osmesa links against the softpipe driver, thus the build
will fail if it's missing.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Matt Turner <mattst88@gmail.com>
Evidently at least static OSMesa is still used as shared one
causes substantial increase in the load time for some programs
that use it (from seconds up-to ~30min).
Rather than forcing everyone to use shared mesa, revert commit
a6efbac9fb and default to shared
build when both shared and static are disabled.
v2: Whitespace cleanup, drop silly comment.
Reported-by: Burlen Loring <burlen.loring@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Currently only linux can make use of dri3, so it would make sense to
enable it explicitly for the platform.
Drop a duplicated libudev check while we're at it.
v3: Properly handle dri3 and reword commit message.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76377
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
It is quite hard to meet the dependency of the libxml2 python bindings
outside Linux, and in particularly on MacOSX; whereas ElementTree is
part of Python's standard library. ElementTree is more limited than
libxml2: no DTD verification, defaults from DTD, or XInclude support,
but none of these limitations is serious enough to justify using
libxml2.
In fact, it was easier to refactor the code to use ElementTree than to
try to get libxml2 python bindings.
In the process, gl_item_factory class was refactored so that there is
one method for each kind of object to be created, as it simplifies
things substantially.
I confirmed that precisely the same output is generated for GL/GLX/GLES.
v2: Remove m4/ax_python_module.m4 as suggested by Matt Turner.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This reverts commit d9b983519c.
Unfortunately it seems like rpath is evaluated before LD_LIBRARY_PATH,
so this breaks e.g. steam, as well as any other user of that env var,
if the llvm path happens to be where other libs also reside.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76082
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Static and shared builds were possible in the good old days
of static makefiles. Currently the build system does not
distinguish nor does anything special when one requests a
static build.
Print a warning message for the packager that static builds
are not supported and continue building shared libs.
Currently only Debian and derivatives use static build, and
they use it for building a Xlib powered libGL. This patch
will only change the warning message they are seeing but
the binaries produced will be identical.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
- As of commit cb080a10b68(configure.ac: Don't require shared LLVM when
building OpenCL) opencl does not mandate using shared llvm.
- Add a warning message that building with static llvm may cause
compilation problems.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Currenly configure.ac will print a warning when one is missing the package.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Christian König <christian.koenig@amd.com>
The primary users of these are linux developers, although
it can be extended for *BSD and others if needed.
Fixes make install for Cygwin and OpenBSD at least.
v2:
- Wrap vdpau targets as well.
v3:
- Fold HAVE_COMPAT_SYMLINKS conditional within install*links.mk
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=63269
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk> (v1)
Reviewed-by: Christian König <christian.koenig@amd.com>
Some platforms different library extension - dll, dylib, a.
Honor that when we are creating the required links.
Rename LIB_EXTENSION to LIB_EXT while we're here.
With libglapi linking aside, building classic drivers on
non-linux platforms should be possible now.
v2: Resolve conflicts.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
All the variables were used before the automake conversion
and do not make sense (nor are used) currently.
Replace GL_LIB_NAME with lib$(GL_LIB).$(LIB_EXTENSION) for
apple-glx. The build has been broken for ages, but this will
ease the recovery process as it happens.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
The loader infrastructure for everything but DRI2 requires that udev be
present, so we can figure out an appropriate driver from the fd. We don't
have a portable solution yet, but presumably it will have similar lookup
based on the device node.
It will also be even more required for krh's udev-based hwdb support,
which lets us have a loader that actually loads DRI drivers not included
in the loader's source distribution.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75212
Reviewed-by: Matt Turner <mattst88@gmail.com>
`--enable-llvm-shared-libs` option was recently renamed as
`--with-llvm-shared-libs`, but several error messages still mention the
old option, causing confusing.
Trivial.
With commit 0432aa064b(configure: use shared-glapi when more than one
gl* API is used) we removed "disable shared-glapi when building without
dri" hunk.
In the good old days of classic mesa, dri and xlib-glx were mutually
exclusive thus the hunk made sense.
Currently enable-dri is used as a synonym for a range of things thus
it's more appropriate to handle xlib-glx explicitly.
Fixes a missing symbol '_glapi_Dispatch' in a xlib powered libGL,
build using the following
./autogen.sh --enable-xlib-glx --disable-dri --with-gallium-drivers=swrast
Cc: Brian Paul <brianp@vmware.com>
Reported-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
This way, we are left with only the preprocessor flags and '-std=X'
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
GLX can be either dri or xlib based, while enable_dri is
used in a variety of contexts.
With enable_dri_glx the context is clearly visible.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
All hardware drivers including the virtual vmwgfx require
the drm pipe-loader in order to be properly loaded by xa,
gbm and opencl.
Note this does _not_ add support for the above three it only
allows the pipe driver to be loaded by the library.
Eg. GBM will now properly open the pipe-i915 driver, should
one be working on the such hardware.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75453
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Building to provide accelration using swrast does not make
sense.
Note: update your build script to explicitly mention svga
in the gallium drivers list, if you are building the vmwgfx
xa library.
v2: Update error message to provide more clarify, add an example.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Recent patch converted our logic to use test -n and test -z.
An emptry string variable (empty_str="") return true for both
thus making the check unreliable.
Fix this by correctly setting the variable when applicable.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The issue is caused by a thinko that an empty string will be
considered of zero length by 'test'. This is not the case,
thus we were building the 'core' of megadrivers even when no
classic drivers were built.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
On my gentoo system, llvm libs are in /usr/lib64/llvm, and llvm-config
--ldflags does not provide the rpath (it does, of course, provide a -L).
This adds the llvm dir to the rpath. It should be harmless if the path
is a system path, and should make things work when it's not.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
While looking at bug 75356, I've noticed that the presence of
x11 egl platform pulls in sw/xlib as "needed" but fails to
report so at the end of configure.
Tested-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The above function implies using the the xlib winsys, which
has additional library dependencies that should not be forced.
Make the software xlib pipe loader optional thus avoid all
the dependency hell. A user that wishes to use the particular
pipe-loader would need to set the following within configure.ac.
enable_gallium_xlib_loader=yes
v2:
- Wrap sw/xlib/xlib_sw_winsys.h to handle compilation on systems
lacking X11 headers. Spotted by Christian Prochaska.
Tested-by: Tom Stellard <thomas.stellard@amd.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75356
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Current behaviour states that shared-glapi is usefull when building
with dri, which is not the case. Shared-glapi is used to dispatch
the gl* functions across the one or more gl api's which can be dri
based but do not need to be.
Fixed the following build
./configure --enable-gles2 --disable-dri --enable-gallium-egl \
--with-egl-platforms=fbdev --with-gallium-drivers=swrast
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75098
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Commit ee55500c22a(configure: cleanup classic dri drivers handling)
cleaned up the logic handling autodetection of dri drivers, but missed
the case when one can explicitly disable dri, and still request opengl.
Fixes build issues for the following
./autogen.sh --disable-dri --with-gallium-drivers=swrast
While we're here, explicitly clear with_dri_drivers whenever building
without such drivers to prevent choking later on.
v2: Simplify with_dri_drivers handling.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75126
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Linking with LLVM static libraries is easily broken by changes to
the llvm-config program or when LLVM adds, removes, or changes library
components. Keeping up with these changes requires a lot of maintanence
effort to keep the build working on the master and stable branches.
Also, because of issues in the past LLVM static libraries, the release
manager is currently configuring with --with-llvm-shared-libs when
checking the build before release. Enabling shared libraries by
default would allow the release manager to run ./configure with
no arguments, and be reasonably confident that the build would succeed.
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
Fixes:
xa_tracker.c: In function 'xa_tracker_create':
xa_tracker.c:147:5: error: implicit declaration of function 'pipe_loader_drm_probe_fd' [-Werror=implicit-function-declaration]
in some build configurations, as XA now implicitly depends on
gallium_drm_loader.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
This is the first version that introduced DRM_CAP_PRIME, which is
implicitly required by egl/wayland.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
* Make sure that only drivers that are handled by configure.ac
are included in DRI_DIRS.
* Change with_dri_drivers default value to auto, and set enable
autodetection, when enable_opengl is on.
v2: Move "test" to the correct location.
v3: Squash DRI_DIRS handling before the switch statement.
Suggested by Ilia Mirkin
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Both x86_64|amd64 and *bsd, already set the full range of available
classic dri drivers. Drop the explicit assignment, and fall back to
the generic default.
Keep explicit list from plafroms/arches that do not handle the default
list.
Update help strings, to explicitly mention "classic" for applicable
DRI drivers.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Move all the cases within one switch statement and handle
i9{1,6}5 and r{adeon,200} independently.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Build two versions of pipe-loader, with only the client version linking
in x11 client side dependencies. This will allow the XA state tracker
to use pipe-loader.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Add the explicit note about the required version during configure.
Require the same version (151) of udev when building the pipe-loader.
Mention the udev version requirement in GBM Requires.private.
v2: Resolve a couple of silly typos. Spotted by Ilia
v3: Cleanup platfrom/platform typo. Spotten by Stefan
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
--enable-gallium-llvm is required by radeonsi. Currently we
check only for LLVM_VERSION_INT which is 0, whenever gallium-llvm
is disabled explicitly.
./configure --with-gallium-drivers=r600,radeonsi --disable-gallium-llvm
v2: Correct typo in error message. Spotted by Tom Stellard
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Matt Turner noted the incorrect order, but I somehow forgotten to
change it before pushing upstream. The other one is a typo during rebase.
Signed-off-by: Christian König <christian.koenig@amd.com>
Featuring a full grown MPEG2 and H264 decoder and a couple of hundred bugs.
v2 (Leo): fix an error for pic_order_cnt_type 1
v3 (Leo): implement support for field decoding
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Leo Liu <leo.liu@amd.com>
Mesa now has a real, feature-rich EGL implementation on X11 via xcb.
Therefore I believe there is no longer a practical need for the egl_glx
driver.
Furthermore, egl_glx appears to be unmaintained. The most recent
nontrivial commit to egl_glx was 6baa5f1 on 2011-11-25.
Tested by running weston-smoke in windowed Weston on X with i965.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Kristian Høgsberg <krh@bitplanet.net>
I sometimes build without EGL just for speed purposes, however
it no longer finds my drivers when I do due to the HAVE_LIBUDEV
defines being wrong.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Emil Velikov
José Fonseca
Ilia Mirkin
Eric Anholt
Bruno Jiménez
Fabio Pedretti
Tom Stellard
Rob Clark
Kusanagi Kouichi
Christian König
Chad Versace
Dave Airlie