Phase two of our network reconfiguration is happening this afternoon, so
we need to drop our RK3399 out for a little while. (Part of this
reconfiguration is to shard our devices across networks and racks, so
losing one part of our infrastructure doesn't mean losing any particular
device type.)
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5689>
Build job artifacts capture Meson logs from _build, so we can analyse
what Meson did during configuration, as well as the full output of any
test jobs.
We were previously calling our build directory 'build', which meant it
wouldn't have been captured by the artifacts, and we were also deleting
it to make really sure there was no chance of logs getting captured
either.
Rename the build directory to '_build' to match the others, and don't
delete it either, so we can keep our configure/test logs.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5689>
This might make linking a bit less prone to OOM when trying to pull in
LLVM.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5689>
Getting assertion failures is helpful to have, even if we are doing a
release build.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5689>
Fossilize is really verbose and it's easy to reach the buffer
limit in GitLab CI.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5627>
The shared runners are set up for concurrent jobs ~= CPUs / 4 (x86)
or 8 (ARM).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5627>
This job runs in about one minute on the current set of traces, and has
successfully revealed some bugs in our current rendering. Takes about 7
minutes currently.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5433>
Builds the renderdoc and apitrace programs so we can replay GL traces on
DUTs.
[Separated out from 5472's commit that also enabled the jobs in LAVA,
dropped unnecessary python packages from arm_build, fixed up arm64_test
build, traces-db in baremetal, new commit message by anholt]
Signed-off-by: Rohan Garg <rohan.garg@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5433>
We build in Debian buster but were currently testing in bullseye-based
ramdisks. This has started being a problem since Python 3.7 was removed
from bullseye.
[ Also bumped arm_test containers, by anholt ]
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5433>
GFX6 doesn't support v_floor_f64 and the precision of v_fract_f64
which is used to implement 64-bit floor is less than what Vulkan
requires.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5609>
The hardware precision of v_rcp_f64, v_sqrt_f64 and v_rsq_f64
is less than what Vulkan requires.
This lowers using the Goldschmidt's algorithm to improve precision.
Fixes dEQP-VK.glsl.builtin.precision_double.* on both compiler
backends.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5609>
This format doesn't have depth, and apparently having earlyz enabled can
cause issues. Fixes at least these tests:
dEQP-VK.renderpass.suballocation.multisample.s8_uint.samples_*
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5586>
These don't seem to be flakey anymore. I did still see a flake with
dEQP-GLES31.functional.layout_binding.ssbo.fragment_binding_array so
I put that one back in.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5577>
We need a newer version to be able to successfully run the OpenGL suites
in dEQP.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5494>
Looks like it fixes some potentially important VK test bugs. But also, it
fixes the GLES31 SSBO layout tests to not be so excessively large, so we
can run them in a reasonable time now. Note that a630 fail list is reset,
since the test list has changed and so we end up with a different subset
of tests being run. Interestingly, in the process the semaphore tests are
now reporting "NotSupported (Exporting and importing semaphore type not
supported at vktSynchronizationSignalOrderTests.cpp:513)" where they
weren't before.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5554>
This reverts commit adeef43d15.
The lab has recovered health, thus re-enable Lima jobs.
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4727>
Since a value of at least "align" is used for nblocks, we might end up
with nblocks greater than the number of GMEM blocks remaining. Check for
this case and bail out, sysmem rendering will be used for such cases.
Fixes some of these tests:
dEQP-VK.pipeline.render_to_image.core.*.huge.*
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5499>
Like for LAVA, make the tradeoff of moving the test scripts and data (55k)
into the artifacts in order to make the per-build jobs not have to pull
down the git tree (hundreds of MB when you don't hit a cached container
for your specific user, which I see happen multiple times a day in my CI
runs).
To do this, we have to be a bit more careful in some places about our
working directory potentially being dirty.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5393>
We've already uploaded and downloaded them from fd.o and put them in the
rootfs, so we can clean up the extra prep work.
Our test job now extends from .test so that the artifacts' install dir
with all the scripts is extracted. This required moving the dependency on
meson-testing to the x86 test-gl/test-vk job blocks.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5393>
When you get a filure and go looking in the results, you'll find weird stuff like this in the XML:
Reference images fill undefined pixels with 3x3 grid pattern.
Attachment 0 (p' = p bin boot builds
dEQP-VK.renderpass.suballocation.attachment_allocation.grow_shrink.89.qpa
deqp dev etc home init install lib media mnt proc results root run sbin
set-job-env-vars.sh sys tmp usr var (1, 1, 1, 1) + (-1, -1, -1, 1))
because we were not quoting the line and 'p *' was getting expanded.
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5435>
This fixes cases where the 3D path is used with layered rendering.
Fixes dEQP-VK.renderpass.suballocation.multisample_resolve.layers* failures
Note the blob's 3D fallback path behaves differently, and uses the
framebuffer information to clear each layer individually (changing the MRT
state each time). But that's not possible in all cases, and the blob fails
to clear properly in dEQP-VK.geometry.layered.*.secondary_cmd_buffer cases.
So this clear path is not based on the blob's behavior.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5426>
I'm not sure why this code was if (0), but if (1) for it fixes
dEQP-GLES31.functional.texture.border_clamp.range_clamp.nearest_float_color
This test expects +inf to get mapped to 255 and -inf to 0, both values
were ending up at 0.
v2: also enable in the SSE paths
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5379>
This fixes:
dEQP-GLES31.functional.draw_indirect.random.2
which ends up with 3x32-bit USCALED values going down this path
some of which have the top bit set, and end up converted to signed
float instead of unsigned float values.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5379>