There's little point in calling _eglGetNativePlatform() in
eglCopyBuffers. The platform returned should be identical to the one
already stored in our _EGLDisplay.
In the following corner case, the check is incorrect.
The function _eglGetNativePlatform effectively invokes the old-style
eglGetDisplay platform selection. Thus if the EGL_PLATFORM platform does
not match with the EGL_EXT_platform_* used to create the display we'll
error out.
Addresses the egl-copy-buffers piglit test.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Clamp the x and y co-ordinates of the rectangles.
v2: Clamp width/height after converting to co-ordinates
(Ilia Merkin)
Signed-off-by: Harish Krupo <harish.krupo.kps@intel.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
From android cts 8.0_r4, a new test case checks if all the required egl
extensions are exposed. In the current implementation we expose KHR_image
if KHR_image_base and KHR_image_pixmap are supported but KHR_image spec
does not mandate the existence of both the extensions.
This patch preserves the current check and also provides the backend
with an option to expose the KHR_image extension.
Test: run cts -m CtsOpenGLTestCases -t \
android.opengl.cts.OpenGlEsVersionTest#testRequiredEglExtensions
Signed-off-by: Harish Krupo <harish.krupo.kps@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
... because converting attrib to int truncates, and that's bad.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Patch adds support and capability to match with new surface attribute,
component type. Currently no configs with floating point type are exposed.
With this change, following dEQP test starts to pass:
dEQP-EGL.functional.choose_config.color_component_type_ext.dont_care
dEQP-EGL.functional.choose_config.color_component_type_ext.fixed
dEQP-EGL.functional.choose_config.color_component_type_ext.float
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
IMG_context_priority
https://www.khronos.org/registry/egl/extensions/IMG/EGL_IMG_context_priority.txt
"This extension allows an EGLContext to be created with a priority
hint. It is possible that an implementation will not honour the
hint, especially if there are constraints on the number of high
priority contexts available in the system, or system policy limits
access to high priority contexts to appropriate system privilege
level. A query is provided to find the real priority level assigned
to the context after creation."
The extension adds a new eglCreateContext attribute for choosing a
priority hint. This stub parses the attribute and copies into the base
struct _egl_context, and hooks up the query similarly.
Since the attribute is purely a hint, I have no qualms about the lack of
implementation before reporting back the value the user gave!
v2: Remember to set the default ContextPriority value to medium.
v3: Use the driRendererQuery interface to probe the backend for
supported priority values and use those to mask the EGL interface.
v4: Treat the priority attrib as a hint and gracefully mask any requests
not supported by the driver, the EGLContext will remain at medium
priority.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Emil Velikov <emli.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The "DRI2" name was reported as confusing when printing EGL infos (one
user reported thinking DRI3 was not working on his X server), and the
only alternative is Haiku, which can only be used on a Haiku machine.
The name therefore doesn't add any information that the user wouldn't
know already, so let's just drop it.
Cc: Kai Wasserbäch <kai@dev.carbon-project.org>
Suggested-by: Emil Velikov <emil.l.velikov@gmail.com>
Related-to: b174a1ae72 ("egl: Simplify the "driver" interface")
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Shorter, explicit and consistent with the rest of the co debase.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Instead of having three, almost identical but not quite,
_eglDebugReport* functions, simply fold them into one.
While doing so drop the unnecessary arguments 'command' and
'objectLabel'. Former is identical to funcName, while the latter is
already stored (yet unused) in _EGLThreadInfo::CurrentObjectLabel.
Cc: Kyle Brenneman <kbrenneman@nvidia.com>
Cc: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> (IRC)
Previously clang would warn about redefinition of typedef EGLDisplay. Avoid
this by adding preprocessor guards to mesa_glinterop.h and including it
after EGL.h is indirectly included.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
If we have an invalid display fed into the functions, the display lookup
will return NULL. Thus as we attempt to get the platform type, we'll
deref. it leading to a crash.
Keep in mind that this will not happen if Mesa is built without X11 or
when the legacy eglCreate*Surface codepaths are used.
A similar check was added with earlier commit 5e97b8f5ce ("egl: Fix
crashes in eglCreate*Surface), although it was only applicable when the
surfaceless platform is built.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
The basic (null) check is identical across all backends.
Just move it to the top.
v2:
- Split the WINDOW vs PIXMAP into separate patches
- Move check after the dpy and config - dEQP expects so
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
This only adds the EGL side, needs to be plumbed into Mesa frontend.
v2: Add check for extension availability.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This patch adds support for the EGL_KHR_partial_update extension for
android platform. It passes 36/37 tests in dEQP for EGL_KHR_partial_update.
1 test not supported.
v2: add fallback for eglSetDamageRegionKHR (Tapani)
v3: The native_window_set_surface_damage call is available only from
Android version 6.0. Reintroduce the ANDROID_VERSION guard and
advertise extension only if version is >= 6.0. (Emil Velikov)
v4: use newly introduced ANDROID_API_LEVEL guard rather than
ANDROID_VERSION guard to advertise the extension.The extension
is advertised only if ANDROID_API_LEVEL >= 23 (Android 6.0 or
greater). Add fallback function for platforms other than Android.
Fix possible math overflow. (Emil Velikov)
Return immediately when n_rects is 0. Place function's entrypoint
in alphabetical order. (Eric Engestrom)
v5: Replace unnecessary calloc with malloc (Eric)
Check for BAD_ALLOC error (Emil)
Check for error in native_window_set_damage_region. (Emil, Tapani,
Eric).
Signed-off-by: Harish Krupo <harish.krupo.kps@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
v2: check for DRIimageExtension version 15 (Jason Ekstrand)
Signed-off-by: Varad Gautam <varad.gautam@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
query and return supported dmabuf format modifiers for
EGL_EXT_image_dma_buf_import_modifiers.
v2: move format check to the driver instead of making format queries
here and then checking.
v3: Check DRIimageExtension version before query (Daniel Stone)
v4:
- move to DRIimageExtension version 15, check queryDmaBufModifiers before
calling (Jason Ekstrand)
- pass external_only to the driver instead of setting as EGL_TRUE here
(Emil Velikov, Daniel Stone)
Signed-off-by: Varad Gautam <varad.gautam@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
allow egl clients to query the dmabuf formats supported on this platform.
v2: return EGLBoolean.
v3: Check DRIimageExtension version before querying (Daniel Stone).
v4: move to DRIimageExtension version 15, error checking (Jason Ekstrand).
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Varad Gautam <varad.gautam@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Currently f one does the silly thing by probing the entry point w/o
checking the extension they will attempt to use the extension even
though it cannot work.
That is due our of of an assert which gets removed in release builds.
Simply error out if the extension is not enabled. Thus we can
apply some cleanups with next commits.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Fixes regressions in Android CtsVerifier.apk on Intel Chrome OS devices
due to incorrect error handling in eglMakeCurrent. See below on how to
confirm the regression is fixed.
This partially reverts
commit 23c86c74cc
Author: Chad Versace <chadversary@chromium.org>
Subject: egl: Emit error when EGLSurface is lost
The problem with commit 23c86c74 is that, once an EGLSurface became
lost, the app could never unbind the bad surface. Each attempt to unbind
the bad surface with eglMakeCurrent failed with EGL_BAD_CURRENT_SURFACE.
Specificaly, the bad commit added the error handling below. #2 and #3
were right, but #1 was wrong.
1. eglMakeCurrent emits EGL_BAD_CURRENT_SURFACE if the calling
thread has unflushed commands and either previous surface is no
longer valid.
2. eglMakeCurrent emits EGL_BAD_NATIVE_WINDOW if either new surface
is no longer valid.
3. eglSwapBuffers emits EGL_BAD_NATIVE_WINDOW if the swapped surface
is no longer valid.
Whe I wrote the bad commit, I misunderstood the EGL spec language
for #1. The correct behavior is, if I understand correctly now, is
below. This patch doesn't implement the correct behavior, though, it
just reverts the broken behavior.
- Assume a bound EGLSurface is no longer valid.
- Assume the bound EGLContext has unflushed commands.
- The app calls eglMakeCurrent. The spec requires eglMakeCurrent to
implicitly flush. After flushing, eglMakeCurrent emits
EGL_BAD_CURRENT_SURFACE and does *not* alter the thread's
current bindings.
- If the app calls eglMakeCurrent again, and the app inserts no
commands into the GL command stream between the two eglMakeCurrent
calls, then this second eglMakeCurrent succeeds without emitting an
error.
How to confirm this fixes the regression:
Download android-cts-verifier-7.1_r5-linux_x86-x86.zip from
source.android.com, unpack, and `adb install CtsVerifier.apk`.
Run test "Projection Cube". Click the Pass button (a
green checkmark). Then run test "Projection Widget". Confirm that
widgets are visible and that logcat does not complain about
eglMakeCurrent failure.
Then confirm there are no regressions in the cts-traded module that
commit 263243b1 fixed:
cts-tf > run cts --skip-preconditions --skip-device-info \
-m CtsCameraTestCases \
-t android.hardware.camera2.cts.RobustnessTest
Tested with Chrome OS board "reef".
Fixes: 23c86c74 (egl: Emit error when EGLSurface is lost)
Acked-by: Tapani Pälli <tapani.palli@intel.com>
Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Nicolas Boichat <drinkcat@chromium.org>
Cc: Emil Velikov <emil.velikov@collabora.com>
The header is used only to provide STATIC_ASSERT. The latter is already
available in utils/macros.h so use that instead and kill of the header.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Add a new bool, _EGLSurface::Lost, and check it in eglMakeCurrent and
eglSwapBuffers. The EGL 1.5 spec says that those functions emit errors
when the native surface is no longer valid.
This patch just updates core EGL. No driver sets _EGLSurface::Lost yet.
I discovered that Mesa failed to detect lost surfaces while debugging an
Android CTS camera test,
android.hardware.camera2.cts.RobustnessTest#testAbandonRepeatingRequestSurface.
This patch doesn't fix the test though, though, because the test expects
EGL_BAD_SURFACE when the surface becomes lost, and this patch actually
complies with the EGL spec. If I interpreted the EGL spec correctly,
EGL_BAD_NATIVE_WINDOW or EGL_BAD_CURRENT_SURFACE is the correct error.
Cc: mesa-stable@lists.freedesktop.org
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The new interface mostly just sits on top of the existing library.
The only change to the existing EGL code is to split the client
extension string into platform extensions and everything else. On
non-glvnd builds, eglQueryString will just concatenate the two strings.
The EGL dispatch stubs are all generated. The script is based on the one
used to generate entrypoints in libglvnd itself.
v2: [Kyle]
- Rebased against master.
- Reworked the EGL makefile to use separate libraries
- Made the EGL code generation scripts work with Python 2 and 3.
- Change gen_egl_dispatch.py to use argparse for the command line arguments.
- Assorted formatting and style cleanup in the Python scripts.
v3: [Emil Velikov]
- Rebase
- Remove separate glvnd glx/egl configure toggles
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Tested with dEQP-EGL.functional.get_proc_address.*
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This will allow us to make sure the list is always sorted in the next
commit.
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Let's make that comment true.
If will also be necessary in a couple commits (using bsearch).
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
As of the last 3 commits, there's a function for each entrypoint.
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
If the provided EGLConfig does not support the requested surface type,
then emit EGL_BAD_MATCH.
Fixes dEQP-EGL.functional.negative_api.create_pbuffer_surface
on GBM.
Cc: "13.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Extension is already implemented in the main code.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Nobody else makes use of this function.
We can always re-export it if someone ever needs it.
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
With fixes from Chad squashed in, plus fixes for issues that Rafael
found while writing piglit tests.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Tested-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Tested-by: Chad Versace <chadversary@chromium.org>
I introduced this code last month, but didn't follow the naming
convention. Fix this.
Fixes: 0a606a400f ("egl: add eglSwapBuffersWithDamageKHR")
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
This was broken when the GLAPI use was removed from mesa_glinterop.h.
Cc: 12.0 13.0 <mesa-stable@lists.freedesktop.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
EGL specification requires context to be current only when sync
type matches EGL_SYNC_FENCE_KHR.
Fixes 25 failing dEQP tests:
dEQP-EGL.functional.reusable_sync.*
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98339
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
EGL_KHR_swap_buffers_with_damage is actually already supported, as it is
technically nothing but a rename of EGL_EXT_swap_buffers_with_damage.
To that effect, both extension are advertised depending on the same
condition, and the new entrypoint simply redirects to the previous one.
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Pre-patch, there were two code paths for parsing EGLSync attribute
lists: one path for old-style EGLint lists, used by eglCreateSyncKHR,
and another for new-style EGLAttrib lists, used by eglCreateSync (1.5)
and eglCreateSync64 (EGL_KHR_cl_event2).
There were two attrib_list parsing functions,
_eglParseSyncAttribList(_EGLSync *sync, const EGLint *attrib_list)
_eglParseSyncAttribList64(_EGLSync *sync, const EGLattrib *attrib_list)
This patch unifies the two attrib_list parsing functions into one,
_eglParseSyncAttribList(_EGLSync *sync, const EGLattrib *attrib_list)
Many internal EGLSync function signatures had *two* attrib_list
parameters to accomodate both code paths: one parameter was an EGLint
list and other an EGLAttrib list. At most one of the parameters was
allowed to be non-null. This patch removes the `EGLint *attrib_list`
parameter, leaving only the `EGLAttrib *attrib_list` parameter, for all
internal EGLSync functions.
v2:
- Consistently use condition (sizeof(int_list[0]) ==
sizeof(attrib_list[0])). [for emil]
v3:
- Don't double-unlock the display in eglCreateSyncKHR.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com> (v2)
Emil Velikov
Harish Krupo
Tapani Pälli
Adam Jackson
Chris Wilson
Marek Olšák
Eric Engestrom
Matt Turner
Eric Engestrom
Grigori Goronzy
Varad Gautam
Chad Versace
Kyle Brenneman
Rob Clark