After doing a bunch of benchmarks, primitive binning helps
some games like The Talos Principle (+5%) or Serious Sam 2017
(+3%). For other titles, either it doesn't change anything or
it hurts very few (less than 1%).
This only affects GFX9.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Following the support for fences on the virtio driver add support
for native fence on virgl. This was somewhat based on the freedeno one.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
We can only start parsing commands from the head pointer. This was
working fine up to now because we only dealt with a "made up" ring
buffer (generated by aub_write) which always had its head at 0.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Toni Lönnberg <toni.lonnberg@intel.com>
Use this value to limit reading the ring buffer.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Toni Lönnberg <toni.lonnberg@intel.com>
According to the EGL_EXT_image_dma_buf_import spec, creating an EGL
image with a DRM format not supported should yield the BAD_MATCH
error :
"
* If <target> is EGL_LINUX_DMA_BUF_EXT, and the EGL_LINUX_DRM_FOURCC_EXT
attribute is set to a format not supported by the EGL, EGL_BAD_MATCH
is generated.
"
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 20de7f9f22 ("egl/dri2: support for creating images out of dma buffers")
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
gbm_bo_create() was presumably meant to originally accept gbm_bo_format
enums, but it's accepted GBM_FORMAT_* tokens since the dawn of time.
This is good, since gbm_bo_format is rarely used and covers a lot less
ground than GBM_FORMAT_*.
Change the documentation to refer to both; this involves removing a 'see
also' for gbm_bo_format, since we can't also use \sa to refer to a
family of anonymous #defines.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
This reverts commit 647c2b90e9. There was
one recently-introduced bug in ac for dvec3 loads, but the other test
failures were actually bugs in the tests. See
9429e621c4
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The handles exported need to be on the KMS device's fd, anything else is
failure. Also, this code is assuming that the scanout resource has been
created already, so assert it.
The DRI3 create_with_modifiers paths don't set tmpl.bind to SCANOUT or
SHARED, with the theory that given that you've got modifiers, that's all
you need. However, we were looking at the tmpl.bind for setting up the
KMS handle in the renderonly case, so we'd end up trying to use vc4's
handle on the hx8357d fd.
Fixes: 84ed8b67c5 ("vc4: Set shareable BOs as T tiled if possible")
Handle all cases in calculation of layers count for isl_view
taking into account texture view and image unit.
st_convert_image was taken as a reference.
When u->Layered is true the whole level is taken with respect to
image view. In other case only one layer is taken.
v3: (Józef Kucia and Ilia Mirkin)
- Rewrote patch by taking st_convert_image as a reference
- Removed now unused get_image_num_layers function
- Changed commit message
v4: (Jason Ekstrand)
- Added assert
Fixes: 5a8c8903
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107856
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We have a bunch of code to do this in the back-end compiler but it's
fairly specific to typed surface messages and the way we emit them.
This breaks it out into NIR were it's easier to do things a bit more
generally. It also means we can easily share the code between the vec4
and FS back-ends if we wish.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
This also changes spirv_to_nir and glsl_to_nir to set them. The one
place that doesn't set them is shared memory access lowering in
nir_lower_io. That will have to be updated before any consumers of it
can effectively use these new alignments.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Acked-by: Karol Herbst <kherbst@redhat.com>
The new helpers can generate any pack/unpack operation including those
for which we do not have specific opcodes and they express a bitcast in
terms of these pack/unpack operations. In particular, the new helpers
properly handle 8-bit types.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
The pattern of adding or multiplying an integer by an immediate is
fairly common especially in deref chain handling. This adds a helper
for it and uses it a few places. The advantage to the helper is that
it automatically handles bit sizes for you.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
This assert won't catch all mistakes with this helper but it will at
least ensure that the top bits are all zero or all one which should help
catch bugs.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Section 3.7 (Identifiers) of the GLSL spec says:
However, as noted in the specification, there are some cases where
previously declared variables can be redeclared to change or add
some property, and predeclared "gl_" names are allowed to be
redeclared in a shader only for these specific purposes. More
generally, it is an error to redeclare a variable, including those
starting "gl_".
This patch should fix piglit tests:
clip-distance-redeclare-without-inout.frag
clip-distance-redeclare-without-inout.vert
However, this causes a regression in
clip-distance-out-values.shader_test. A fix for that test has been sent
to the piglit list for review:
https://patchwork.freedesktop.org/patch/255201/
As far as I understood following mailing thread:
https://lists.freedesktop.org/archives/piglit/2013-October/007935.html
looks like we have accepted to remove an ability to change qualifiers
but have not done it yet. Unless I missed something)
v2 (idr): Move 'earlier->data.mode != var->data.mode' test much earlier
in the function. Add special handling for gl_LastFragData.
Signed-off-by: Andrii Simiklit <andrii.simiklit@globallogic.com>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
I screwed up a rebase over a refactor and didn't notice locally because
the uncommitted refactor hid the issue.
Fixes: c973364967 "egl: add missing glvnd entrypoint for EGL_ANDROID_blob_cache"
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Both BRW_SFID_SAMPLER and GEN6_SFID_DATAPORT_SAMPLER_CACHE are getting
disassembled as "sampler", which is misleading for assembler tool.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Fixes dEQP-EGL.functional.get_proc_address.extension.egl_android_blob_cache
on builds with glvnd enabled.
Fixes: 6f5b57093b "egl: add support for EGL_ANDROID_blob_cache"
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Fixes: 6328536ff2 "gbm: Introduce a helper function for
printing GBM format names."
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Currently we detect when a breaking commit:
- has landed in stable, and
- is referenced by a untagged fix in master
Yet we did not consider the case of breaking commit:
- prior to the branchpoint, and
- is referenced by a untagged fix in master
Addressing the latter is extremely slow, due to the size of the lookup.
That said, we can trivially use the existing is_sha_nomination() helper
to catch reverts.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Latter is rather picky wrt surrounding white space. The explicit `test`
doesn't have that problem, plus the statements read a bit easier.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
We have a number of cases were devs will use a tag "broken by".
While it's not something officially documented or recommended, checking
for it is trivial enough.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Every so often, we forget to add the colon after "fixes". Trivially
tweak the script to catch it.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Refactor is_fixes_nomination into a is_sha_nomination helper. This way
we can reuse it for more than the usual "Fixes:" tag.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Currently we match on:
- any arbitrary length of,
- any a-z A-Z and 0-9 characters
At the same time, a commit sha consists of lowercase hexadecimal
numbers. Any sha shorter than 8 characters is ambiguous - in some cases
even 11+ are required.
So change the pattern to a-f0-9 and adjust the length to 8-40.
As we're here we could use a single grep, instead of the grep/sed combo.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Having a separate script to handle the fixes tag, brings a number of
issues, so let's fold it in get-pick-list.sh.
v2:
- pass the sha as argument to the function
- Keep original sed pattern
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
As the comment in get-typod-pick-list.sh says, there's little point in
having a duplicate file.
Add the new pattern + tag to get-pick-list.sh and nuke this file.
v2:
- pass the sha as argument to the function
- grep -q instead of using a variable (Eric)
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
With later commits we'll fold all the different scripts into one.
Add the explicit prefix, so that we know the origin of the nomination
v2:
- pass the sha as argument to the function
- swap $tag = none for an else statment (Juan)
- grep -q instead of using a variable (Eric)
- print the tag and commit oneline separately (Eric)
v3:
- drop unused "tag=none" assignment (Juan)
- typo nomination
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com> (v2)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Currently we force disable the pager via "|cat" where --no-pager
exists. Additionally we could use git show instead of git log -n1.
Use those for a slightly more understandable code.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
A while back we agreed that having a live/staging branch is beneficial.
Sadly we forgot to document that, so here is my first attempt.
Document the caveat that the branch history is not stable.
CC: Andres Gomez <agomez@igalia.com>
CC: Dylan Baker <dylan@pnwbakers.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Reword slightly and highlight the important parts of the text.
CC: Andres Gomez <agomez@igalia.com>
CC: Dylan Baker <dylan@pnwbakers.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
etna_resource_alloc and etna_resource_from_handle currently use different checks.
This leads to
etna_resource_from_handle:492: target=2, format=PIPE_FORMAT_B8G8R8X8_UNORM, 1080x1920x1, array_size=1, last_level=0, nr_samples=0, usage=0, bind=8000a, flags=0
etna_resource_from_handle:541: BO stride 4320 is too small for RS engine width padding (4352, format PIPE_FORMAT_B8G8R8X8_UNORM)
since etna_resource_from_handle wants to be aligned to a 16 byte
boundary while the etna_resource_alloc does not.
Adjust the two checks by using a common function.
Broken by baff59ebf0
Signed-off-by: Guido Günther <guido.gunther@puri.sm>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
This was missed when I added the new enum.
Cc: 18.3 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Samuel Pitoiset
Robert Foss
Lionel Landwerlin
Daniel Stone
Connor Abbott
Eric Anholt
Danylo Piliaiev
Jason Ekstrand
Ian Romanick
Eric Engestrom
Sagar Ghuge
Emil Velikov
Guido Günther
Juan A. Suarez Romero
Marek Olšák
Andrii Simiklit