Previously, these were pulled out of the GL context conditionally based on
whether we were running ff/ARB or a GLSL program. Now, we just pass them
in so that the visitor doesn't have to grab them itself.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Previously, each shader took 3 shader time indices which were potentially
at arbirary points in the shader time buffer. Now, each shader gets a
single index which refers to 3 consecutive locations in the buffer. This
simplifies some of the logic at the cost of having a magic 3 a few places.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
This creates the options at screen cration time and then we just copy them
into the context at context creation time. We also move is_scalar to the
brw_compiler structure.
We also end up manually setting some values that the core would have set by
default for us. Fortunately, there are only two non-zero shader compiler
option defaults that we aren't overriding anyway so this isn't a big deal.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
While we're at it, we'll drop the note about 10-20% performance loss.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
v2 (Ken): Make shader_debug_log a printf-like function.
v3 (Jason): Add a void * to pass the brw_context through
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This will be useful for wrapper functions.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Coverity sees the if (mode >= BRW_PRIM_OFFSET (128)) test and assumes
that the else-branch might execute for mode to up 127, which out be out
of bounds.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Coverity sees that the functions immediately below the new assertions
dereference these pointers, but is unaware that an ENDIF always follows
an IF, etc.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
If the stride is 0, the source is a uniform and we should not modify the
stride.
Cc: "10.6" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91047
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The call to dri2_x11_add_configs_for_visuals (previously
dri2_add_configs_for_visuals) was moved downwards in commit f8c5b8a1,
but appeared again in its original position after its rename in
d019cd81. Remove it.
Cc: "10.5 10.6" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Boyan Ding <boyan.j.ding@gmail.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>
On gen9+ MOCS is an index into a table. It is 7 bits, and AFAICT, bit 0 is for
doing encrypted reads.
I don't recall how I decided to do this for BXT. I don't know this patch was
ever needed, since it seems nothing is broken today on SKL. Furthermore, this
patch may no longer be needed because of the ongoing changes with MOCS setup. It
is what is being used/tested, so it's included in the series.
The chosen values are the old values left shifted. That was also an arbitrary
choice.
v2: Use shift in MOCS to make it clear what we're doing. (Ken)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Without first running the bo through pushbuf_refn, the nouveau drm
library will have uninitialized structures regarding this bo, and will
insert incorrect data.
This fixes supertuxkart 0.9 crash on start (where it ends up doing a lot
of indirect draws).
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.5 10.6" <mesa-stable@lists.freedesktop.org>
Since we clear the TFB bufctx binding point above, we need to put all of
the active tfb's back in, even if they haven't changed since last time.
Otherwise the tfb may get moved into sysmem and the underlying mapping
will generate write errors.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.5 10.6" <mesa-stable@lists.freedesktop.org>
This fixes compilation failures in Dota 2 Reborn where a texture unit
binding point was used that was numerically higher than the max
per stage.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Timothy Arceri <t_arceri@yahoo.com.au>
Tested-by: Nick Sarnie <commendsarnex@gmail.com>
Cc: "10.5 10.6" <mesa-stable@lists.freedesktop.org>
The only reason we touch glapi is to dlopen it in order to:
- make sure that the unresolved _glapi* symbols in the dri modules are
provided.
- fetch glFlush() and use it at various stages in the dri2 driver.
Cc: Chih-Wei Huang <cwhuang@linux.org.tw>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The whole of GBM does not rely on even a single symbol from the GL
dispatch library, unsuprisingly. The only need for it comes from the
unresolved symbols in the DRI modules, which are now correctly handled
with Frank's commit.
Cc: "10.5 10.6" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Dri driver libs are not linked to pull in libglapi so gbm_create_device()
fails when it tries to dlopen them (unless the application is linked
with something that does pull in libglapi, like libGL).
Until dri drivers can be fixed properly, dlopen libglapi before trying
to dlopen them.
Cc: "10.5 10.6" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Frank Henigman <fjhenigman@google.com>
[Emil Velikov: Drop misleading bugzilla link, mention that libname differs]
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
The latter is a hard requirement and without it we'll error out later
on in the build.
Cc: "10.5 10.6" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Already handled in the Makefile which includes the drivers/x11 subdir.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: Brian Paul <brianp@vmware.com>
Cc: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Jose Fonseca <jfonseca@vmware.com>
Cc: Brian Paul <brianp@vmware.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Jose Fonseca <jfonseca@vmware.com>
Cc: Brian Paul <brianp@vmware.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Jose Fonseca <jfonseca@vmware.com>
Printing out the message when shared_glapi is disabled only leads to
confusion.
Cc: "10.5 10.6" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Identical to the previous commit - unused by neither the Autotools,
Android or SCons build.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Dylan Baker <baker.dylan.c@gmail.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
None of the three build systems ever set it, as such we can clear things
up a bit.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Dylan Baker <baker.dylan.c@gmail.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
We've moved the open with CLOEXEC idiom into a helper function, so
call it instead of duplicating the code.
This also replaces a couple of opens that didn't properly do CLOEXEC.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
We've moved the open with CLOEXEC idiom into a helper function, so
call it instead of duplicating the code here.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
This is already our common idiom for opening files with CLOEXEC and
it's a little ugly, so let's share this one implementation.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Replacing dup() with fcntl F_DUPFD_CLOEXEC creates the duplicate
file descriptor with CLOEXEC so it won't be leaked to child
processes if the process fork()s later.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
If the shader doesn't specify number of invocations, assume one.
This fixes geometry shaders on state trackers other than Mesa (and
probably graw tests too.)
Trivial.
This extends the draw code to add support for invocations.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is just for softpipe, llvmpipe won't work without
some changes.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is required for ARB_gpu_shader5 support in softpipe.
v2: add support to txd/txf/txq paths.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
These are basically just moves, so they should be safe as well.
When disabling i965's GLSL IR level scalarizer (channel expressions)
pass, I started seeing NIR code like this:
if ssa_21 {
block block_1:
/* preds: block_0 */
vec4 ssa_120 = vec4 ssa_82, ssa_83, ssa_84, ssa_30
/* succs: block_3 */
} else {
block block_2:
/* preds: block_0 */
/* succs: block_3 */
}
block block_3:
/* preds: block_1 block_2 */
vec4 ssa_33 = phi block_1: ssa_120, block_2: ssa_2
Previously, the GLSL IR scalarizer pass would break the vec4 into a
series of fmovs, which were allowed by the peephole pass. But with
the vec4 operation, they were not. We want to keep getting selects.
Normal i965 on Broadwell:
instructions in affected programs: 200 -> 176 (-12.00%)
helped: 4
With brw_fs_channel_expressions() disabled:
instructions in affected programs: 1832 -> 1646 (-10.15%)
helped: 30
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>