This patch makes it possible to disable DRI3 if desired.
Tested with:
./configure --disable-dri3 --with-dri-drivers=i965 \
--with-gallium-drivers= --disable-vdpau --disable-egl \
--disable-gbm --disable-xvmc
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71397
Cc: 10.0 <mesa-stable@lists.freedesktop.org>
Uses the __DRIimage loader interfaces.
v2: Fix _XIOErrors when DRI3 isn't present (change by anholt). Apparently
XCB just terminates your connection if you don't check for extensions
before using them, instead of returning an error like you'd expect.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Commit aec20d66d9
(automake: properly handle non-default expat installation),
assumed that up-to date distributions use a recent version
of expat that handles security vunerabilities CVE-2012-1147
and CVE-2012-1148. Seems like this is not always the case
and they prefer to backport only the fix, rather than use
the updated library.
This commit adds a default case -lexpat whenever expat is
not found, while properly handling expat.pc if present.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71022
Reported-By: Bryce Harrington <b.harrington@samsung.com>
Reported-By: Vinson Lee <vlee@freedesktop.org>
Tested-by: Bryce Harrington <b.harrington@samsung.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Use PKG_CHECK_MODULE over requesting the user to setup the
option at configure time. Drop unused EXPAT_INCLUDE and
update all targets.
NOTE: The this commit removes the --with-expat configure
option. One should ensure that the expat they wish to use
has expat.pc file accessible by pkg-config.
v2:
* Add note about the removal of --with-expat
(per Tom Stellard)
* Drop EXPAT_CFLAGS for targets that do not build DRI_COMMON
(spotted by Matt Turner)
v3:
* Rebase on top of megadrivers (drop EXPAT_CFLAGS from swrast)
Acked-by: Matt Turner <mattst88@gmail.com> (v2)
Reviewed-by: Tom Stellard <thomas.stellard@amd.com> (v2)
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Conflicts:
configure.ac
src/mesa/drivers/dri/common/Makefile.am
Already available and used in other places of configure.ac.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
No driver uses it any more, and it's been replaced by megadrivers.
v2: Remove always-on conditional for NEED_LIBPROGRAM (review by Emil)
Reviewed-by: Matt Turner <mattst88@gmail.com> (v1)
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
v2: drop dridir now that it's unused.
v3: Fix linking after rebase when building just swrast from classic but a
drm-using gallium driver.
v4: Consistently put spaces around += in the updated Makefile.am block.
v5: Set a global driverAPI variable so loaders don't have to update to
createNewScreen2() (though they may want to for thread safety).
Reviewed-by: Matt Turner <mattst88@gmail.com> (v3)
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
This required some reordering of headers to ensure that the symbol name
redefines happened before any prototypes.
v2: drop dridir now that it's unused.
v3: Consistently put spaces around += in the updated Makefile.am blocks.
v4: Set a global driverAPI variable so loaders don't have to update to
createNewScreen2() (though they may want to for thread safety).
Reviewed-by: Matt Turner <mattst88@gmail.com> (v2)
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
i915 has symbols for formerly-shared code that conflict with i965, so we
define them away using gen-symbol-redefs.py. Options considered:
- This option. Downsides: The symbols in profiling and debugging don't
match the source. The symbol list may change in the future and we won't
notice without manually running the tool again.
- Use objcopy --localize-hidden to automatically demote our symbols to
locals. This didn't work on i965 due to c++ weak symbols (which can't
be localized), but could work on i915. We could do it on i915 only, but
it does produce libtool warnings at link time due to libtool not knowing
if the resulting .o file is safe to link (stupid libtool). Plus you end
up with different symbols of the same name, which is confusing for
debugging too. On the other hand, no future symbol conflicts long term.
- Write our own libelf tool that handles c++ weak symbols like we want and
apply it to all drivers. All the downsides of above, but applies
uniformly across drivers.
- Edit the files to just rename all the i915 or i965 symbols that
conflict. There are on the order of 100 that have a prefix we used to
share, so it would take a bit of typing. Fewest downsides, but still
can have conflicts long term.
Ultimately, this is the least invasive change at the moment, and we can
see if the "more symbol conflicts appear later" thing is a real concern or
not.
Note that the ability to compile a version of i915 without INTEL_DEBUG env
support is dropped. It's too useful.
v2: drop dridir now that it's unused.
v3: Consistently put spaces around += in the updated Makefile.am block.
v4: Set a global driverAPI variable so loaders don't have to update to
createNewScreen2() (though they may want to for thread safety).
Reviewed-by: Matt Turner <mattst88@gmail.com> (v2)
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
v2: drop dridir now that it's unused.
v3: Consistently put spaces around += in the updated Makefile.am block.
v4: Set a global driverAPI variable so loaders don't have to update to
createNewScreen2() (though they may want to for thread safety).
v5: Fix missed public symbol in nouveau. (caught by Emil)
Reviewed-by: Matt Turner <mattst88@gmail.com> (v2)
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Previously, we've split things such that mesa core is in libdricore,
exposing the whole Mesa core interface in the global namespace, and the
i965_dri.so code all links against that. Along with polluting application
namespace terribly, it requires extra PLT indirections and prevents LTO.
Instead, we can build all of the driver contents into the same .so with
just a few symbols exposed to be referenced from the actual driver .so
file, allowing LTO and reducing our exposed symbol count massively.
FPS improvement on GLB2.7 with INTEL_NO_HW=1: 2.61061% +/- 1.16957% (n=50)
(without LTO, just the PLT reductions from this commit)
Note that the X Server requires commit
7ecfab47eb221dbb996ea6c033348b8eceaeb893 to successfully load this driver!
v2: Set a global driverAPI variable so loaders don't have to update to
createNewScreen2() (though they may want to for thread safety).
v3: Drop AM_CPPFLAGS addition (Emil pointed out I'd missed some cflags
that would be necessary, though only if we actually relied on them).
v4: Fix install with DESTDIR set.
Reviewed-by: Matt Turner <mattst88@gmail.com> (v1)
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> (v2)
The original intent of the variable was to prevent adding
libdrm dependency for non drm drivers (swrast). This is
already handled with __NOT_HAVE_DRM_H, and with the recent
merge of the dri_util and drisw_util code this variable has
started causing build issues.
Eg. the following will fail
$ ./autogen.sh --with-dri-drivers=swrast --with-gallium-drivers=
$ make
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Andreas Boll <andreas.boll.dev@gmail.com>
* As discussed on the mailing list,
forced no-rtti breaks C++ public
API's such as the Haiku C++ libGL.so
* -fno-rtti *can* be still set however
instead of blindly forcing -fno-rtti,
we can rely on the llvm-config
--cppflags output.
If the system llvm is built without
rtti (default), the no-rtti flag will be
present in llvm-config --cppflags
(which we pick up on)
If llvm is built with rtti
(REQUIRES_RTTI=1), then -fno-rtti is
removed from llvm-config --cppflags.
* We could selectively add / remove rtti
from various components, however mixing
rtti and non-rtti code is tricky and
could introduce missing symbols.
* This needs impact tested.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
With commit cb1febb07, I have incorrectly removed HAVE_COMMON_DRI
assuming that swrast does not need to build the translations for
driconf options, as effectively swrast/drisw does not use them.
With the incoming unification work of dri and drisw, it makes
sense just to revert the offending hunk.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70057
Reported-by: Vinson Lee <vlee@freedesktop.org>
Tested-by: Vinson Lee <vlee@freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Move glx/{,xlib/}Makefile.am to preserve file list
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
libllvmradeon.la is available whenever NEED_RADEON_LLVM is set, using
R600_NEED_RADEON_GALLIUM is rather ambiguous and unnecessary. Drop it
in favour of NEED_RADEON_LLVM.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
libdricommon.la is available whenever a non swrast driver is built.
All the classic dri drivers make use of the prebuild library but all
of the gallium ones rebuild it explicitly.
While we're here gallium/{llvm,soft}pipe does not require HAVE_COMMON_DRI
thus do not set in during configure.
v2: [Emil] Add commit message and drop HAVE_COMMON_DRI from configure.ac
v3: [Emil] Rebase and resolve targets/r*/dri conflicts
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Allows us to share more code between different targets.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Marek Olšák <marek.olsak@amd.com>
Allows us to share more code between different targets.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Marek Olšák <marek.olsak@amd.com>
Allows us to share more code between different targets.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Marek Olšák <marek.olsak@amd.com>
Normally, LD_PRELOAD will take precedence over your own symbols, which you
want for things like malloc() in libc. But we don't have any local
symbols we would want overridden (like hash_table_insert(), for example!),
so tell the linker to resolve them internally. This also avoids calls
through the PLT.
Saves almost 100k on libdricore's size, and gets us a bunch of the
performance back that we had with non-dricore.
Reviewed-by: Ian Romanick <ian.d.romanick@.intel.com>
It is planned to ship openSUSE 13.1 with -shared libs.
nouveau.la, nv30.la, nv50.la and nvc0.la are currently LIBADDs in all nouveau
related targets.
This change makes it possible to easily build one shared libnouveau.so which is
then LIBADDed.
Also dlopen will be faster for one library instead of three and build time on
-jX will be reduced.
Whitespace fixes were requested by 'git am'.
Signed-off-by: Johannes Obermayr <johannesobermayr@gmx.de>
Acked-by: Christoph Bumiller <christoph.bumiller@speed.at>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
We don't actually use anything from builtin_function.cpp, so we don't
need to generate it anymore.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Acked-by: Paul Berry <stereotype441@gmail.com>
As of "2f142d59 build: Add --enable-gallium-osmesa flag." the pkgconfig
file from classic osmesa is no longer installed when building gallium
osmesa, so copy it to gallium osmesa and install the copy instead.
CC: "9.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The Gallium implementation is apparently not ready for regular
consumption, so as much as I hate adding more build-time options, here's
another.
Acked-by: Brian Paul <brianp@vmware.com>
Clover needs the option component of llvm.
Reviewed-by: Tom Stellard <tom@stellard.net>
Signed-off-by: Niels Ole Salscheider <niels_ole@salscheider-online.de>
Rather than having to keep track of all the build systems and their respecitve
definition of the mesa version, use a single top file VERSION. Every build
system is responsible for reading/parsing the file and using it
v2:
* remove useless bulletpoint from the documentation, suggested by Matt
* "Androing is Linux. Use '/' in stead of '\'", spotted by Chad V
* use cleaner code to get the version in scons, suggested by Chad V
v3:
* ensure leading and trailing whitespace characters are stripped while parsing
* android: handle GNU shell commands approapriately
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Bump major version, as the change to require explicit
xa_context_flush(), the addition of the handle-type parameter to
xa_surface_handle(), and change of surface to ref/unref will require a
minor change in DDX.
The current gen_matypes logic assumes that the host compiler will produce
information that is useful for the target compiler. Unfortunately, this
is not the case whenever cross-compiling.
When we detect that we're cross-compiling and using GCC, use the target
compiler to produce assembly from the gen_matypes.c source, then process
it with a shell script to create a usable header. This is similar to how
the linux kernel creates its asm-offsets.c file.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Use grep -w instead of the empty string escape sequences
which are less portable. Makes the grep tests
function as intended on OpenBSD.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Vinson Lee <vlee@freedesktop.org>
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
The AC_CHECK_FILE macro can't be used for cross compiling as it will
result in "error: cannot check for file existence when cross compiling".
Replace it with the AS_IF macro.
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Jonathan Liu <net147@gmail.com>
eglplatform.h defaults to X11 on Unix unless told otherwise, so if we're doing a
build without any X11 support tell it so that we don't try including headers
that don't exist.
Also set GL_PC_FLAGS so that the definition is in egl.pc, so that applications
using EGL don't try to pull in X11 headers on systems where EGL was configured
without X11 support.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64959
Signed-off-by: Ross Burton <ross.burton@intel.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
The adreno a3xx GPU is found in newer snapdragon devices, such as the
nexus4. The a3xx is GLESv3 and OpenCL capable, although that is not
enabled yet in gallium.
Compared to a2xx, it introduces an entirely new unified shader ISA, and
re-shuffles all or nearly all of the registers. The good news is that
(for the most part) the registers are more orthogonal, not combining
unrelated state in a single register. And that there is a lot more
flexibility, so we don't need to patch and re-emit the shader like we
did on a2xx.
The shader compiler is currently quite dumb, there would be a lot of
room for improvement with an optimizing pass. Despite that, with the
a320 in my nexus4 it seems to be ~2-3x faster compared to the a220 in my
HP touchpad.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Split the parts that are specific to adreno a2xx series GPUs from the
parts that will be in common with a3xx, so that a3xx support can be
added more cleanly.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
This patch unifies mesa's PACKAGE_VERSION on autotools, scons and
Android build systems.
Current behaviour is:
- Autotools uses 9.2.0 as PACKAGE_VERSION
- Scons and Android use 9.2-devel as PACKAGE_VERSION
With this patch all three build systems use 9.2.0-devel as
PACKAGE_VERSION.
Reviewed-by: Brian Paul <brianp@vmware.com>
When building dri-swrast, use gallium_check_st to set HAVE_COMMON_DRI.
Commit 07f2dee7 added setting of HAVE_COMMON_DRI in gallium_check_st.
But the dri-swrast case did not use gallium_check_st.
So dri/common was still not built.
v2: set HAVE_COMMON_DRI=yes instead of using gallium_check_st
NOTE: This is a candidate for the 9.1 branch.
(Depends on 7de78ce5 and 07f2dee)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61821
Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com>
r600g needs it too, so add ipo in the common radeon_llvm_check().
radeonsi compiled and linked, but it failed at dynamic link time
with a missing symbol.
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
This fixes and enables texturing with compressed MSAA colorbuffers
on Evergreen and Cayman. For the first time, multisample textures work
on Cayman.
This requires the libdrm flag RADEON_SURF_FMASK.
v2: require libdrm_radeon 2.4.45
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Not used anymore.
v2: Andreas Boll <andreas.boll.dev@gmail.com>
- split patch into two patches
- remove more unused code
Reviewed-by: Matt Turner <mattst88@gmail.com>
The three users of GALLIUM_PIPE_LOADER_LIBS (OpenCL, gallium-gbm,
gallium tests) don't appear to need libws_xlib.la.
Tested-by: Tom Stellard <thomas.stellard@amd.com>
Tested-by: Aaron Watry <awatry@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
It guarded the function prototype of pipe_loader_sw_probe, whose use (in
pipe_loader.c) and definition (in pipe_loader_sw.c) were not guarded.
Both are built into libpipe_loader.la if HAVE_LOADER_GALLIUM, which is
enable_gallium_loader in configure.ac.
Tested-by: Tom Stellard <thomas.stellard@amd.com>
Tested-by: Aaron Watry <awatry@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
For consistency, since we already have HAVE_PIPE_LOADER_{SW,DRM}.
Tested-by: Tom Stellard <thomas.stellard@amd.com>
Tested-by: Aaron Watry <awatry@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Added in e1364530 but never used.
Tested-by: Tom Stellard <thomas.stellard@amd.com>
Tested-by: Aaron Watry <awatry@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
It's next to useless, since it just allows you to turn off VDPAU and
XvMC with a single switch. Just check whether Gallium drivers are
enabled instead.
Reviewed-by: Christian König <christian.koenig@amd.com>
v2: Remove left over code
v3: Restage properly the commit so hunk of first one are not in
second one.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Currently the vdpau and xvmc detection code, is enabled for all builds. The
state trackers exist only within gallium. Enable whenever at least one gallium
driver is selected
v2: removed stray '-a'
[mattst88 v3]: Removed stray $.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=63645
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Since we now have UVD support we should enable them by default.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
configure still uses it to print the enabled winsys.
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-and-Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
configure still uses it to print the enabled targets.
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-and-Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
And don't build it from other Makefiles. That's awful, and breaks
distclean.
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-and-Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-and-Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
configure still uses it to print the enabled state trackers.
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-and-Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-and-Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Neither are used in Makefile.ams.
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-and-Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-and-Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
A step toward working make dist/distcheck.
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-and-Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Just everything you need for UVD with r600g and radeonsi.
v2: move UVD code to radeon subdir, clean up build system additions,
remove an unused SI function, disable tiling on SI for now.
v3: some minor indentation fix and rebased
v4: dpb size calculation fixed
v5: implement proper fall-back in case the kernel doesn't support UVD,
based on patches from Andreas Boll but cleaned up a bit more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Clover needs the irreader component of llvm
v2: Check for irreader component
irreader is only available with LLVM 3.3 >= 177971
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Niels Ole Salscheider <niels_ole@salscheider-online.de>
Currently works on a220. Others in the a2xx family look pretty similar
and should be pretty straightforward to support with the same driver.
The a3xx has a new shader ISA, and while many registers appear similar,
the register addresses have been completely shuffled around. I am not
sure yet whether it is best to support with the same driver, but
different compiler, or whether it should be split into a different
driver.
v1: original
v2: build file updates from review comments, and remove GPL licensed
header files from msm kernel
v3: smarter temp/pred register assignment, fix clear and depth/stencil
format issues, resource_transfer fixes, scissor fixes
Signed-off-by: Rob Clark <robdclark@gmail.com>
Commit 67ef7559 added an || test "x$enable_dri" check in an attempt to
get the DRI common bits built in some necessary cases. That change was
inappropriate as it made these common DRI pieces be built
unconditionally, so some builds were broken.
Subsequently, commit 998d975e3 change the "|| test" to a "-a"
conjunction within the existing test invocation. This made the '-a
"x$enable_dri" = xyes' clause have no effect, (as it was inside an
enclosing test for the same condition). So the new breakage from
commit 67ef7559 was addressed, but the original problems were
regressed.
The immediately preceding commit removed the redundant condition.
Now, finally this commit fixes the original problem as described in
the commit message of 67ef7559: this code should be compiled when
using the DRI state tracker. In order to do so, the HAVE_*_DRI
conditionals must be moved after the last assignment of HAVE_COMMON_DRI.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61821
Tested-by: Stéphane Marchesin <marcheu@chromium.org>
X11 is already checked conditionally below.
Fixes OSMesa-only configurations to not require X11.
Note: This is a candidate for the 9.1 branch.
Reviewed-by: Brian Paul <brianp@vmware.com>
Commit 86d30dea3c broke building with older
automake versions with this error:
Makefile:769: *** Recursive variable am__v_YACC_ references itself (eventually). Stop.
This patch fixes it. Fix stolen from xorg-macros.
Signed-off-by: Lauri Kasanen <cand@gmx.com>
The third argument of AC_ARG_WITH is evaluated for any provided value,
not only on --with-, so it must not force-enable the feature
Also, setting $with_llvm_shared_libs in the opencl check was overriding
the user switch
https://bugs.freedesktop.org/show_bug.cgi?id=59851
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
GLX uses mapi/glapi/libglapi.la, which is only built for OpenGL.
If the user specified --enable-xlib-glx --disable-opengl, error out, as these
cannot be both observed at the same time. If the user just specified
--disable-opengl but not --disable-glx, print a warning and disable GLX as
well.
NOTE: This is a candidate for the stable branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59364
Tested-by: Tom Stellard <thomas.stellard@amd.com>
If we build clover with LLVM static libraries, then clover and also each
pipe_*.so driver that is built will contain their own static copy of
LLVM. The recent automake changes have uncovered a problem where
the pipe_*.so drivers try to use clover's LLVM symbols. This causes
LLVM's static registry objects to be initialized each time
a pipe_*.so driver is loaded by clover. Initializing these objects
multiple times is not allowed and leads to assertion failures in the
LLVM code.
We can avoid all these problems by having clover and all the pipe_*.so
drivers link against the same LLVM shared library.
https://bugs.freedesktop.org/show_bug.cgi?id=59334https://bugs.freedesktop.org/show_bug.cgi?id=59534
v2:
- Fix shared library detection when LLVM is built with CMake
In order to determine which static LLVM libraries are needed we pass
a list of components to llvm-config and it generates the list of
library dependencies for us. The advantage of only calling llvm-config
one time is that it can determine if two components depend on the same
library and then add it to the output list only once. The old practice
of having each driver call llvm-config to add its own dependencies to
$(LLVM_LIBS) caused many libraries to be added to this variable multiple
times.
No one tests yacc/byacc. Let's just request bison specifically.
Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=46815
configure should warn if libxml2 is not found.
libxml2 is needed by glapi/gen.
Fixes error during build in src/mapi/glapi/gen:
ImportError: No module named libxml2
NOTE: This is a candidate for the 9.0 branch.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=31598
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Currently the use of external firmware is required, with kernel and
userspace firmware needed for all Fermi cards except nvd9. Kepler and nvd9
should only require kernel firmware.
Previously, the xmlpool directory had a lone Makefile to assist poeple in
manually invoking a deep make in order to update the translations in
options.h. We can observe that this wasn't happening in fact, (new
translations had been added to de.po without being generated into options.h,
and new options had been manually added directly to options.h rather than to
t_options.h).
Prevent both of these problems from occurring in the future by automatically
generating options.h as part of the standard build of mesa.
For this, the generated options.h is now removed from version control, (along
with Makefile in favor of Makefile.am).
[chadv: Port the Autotools changes to Android.]
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Tom Stellard
Armin K
Keith Packard
Matt Turner
Fabio Pedretti
Marek Olšák
Emil Velikov
Eric Anholt
Francisco Jerez
Alexander von Gluck IV
Johannes Obermayr
Christian König
Kenneth Graunke
Kristian Lehmann
Jon Severinsson
Niels Ole Salscheider
Rob Clark
Mike Frysinger
Jean-Sébastien Pédron
Jonathan Gray
Klemens Baum
Jonathan Liu
Alex Deucher
Ross Burton
Andreas Boll
Mike Stroyan
Andreas Hartmetz
Marek Olšák
Brian Paul
Chia-I Wu
Jerome Glisse
José Fonseca
Daniel Martin
Adam Sampson
Lauri Kasanen
Vinson Lee
Michel Dänzer
Quentin Glidic
Maarten Lankhorst
Damien Lespiau
Alexandre Demers
Carl Worth