After investigating on this, it appears that COND_WRITE doesn't
work correctly in some situations. I don't know exactly why does
it fail to update DB_Z_INFO.ZRANGE_PRECISION, but as AMDVLK
also uses COND_EXEC I think there is a reason.
Now the driver stores a new metadata value in order to reflect
the last fast depth clear state. If a TC-compat HTILE is fast cleared
with 0.0f, we have to update ZRANGE_PRECISION to 0 in order to
work around that hardware bug.
This fixes rendering issues with The Forest and DXVK and doesn't
seem to introduce any regressions.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108914
Fixes: 68dead112e ("radv: update the ZRANGE_PRECISION value for the TC-compat bug")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
CP DMA can only be busy when the driver copies buffers. The
only affected Vulkan commands are vkCmdCopyBuffer() and
vkCmdUpdateBuffer() (because we fallback to a copy depending on
a threshold). Clear operations are currently not concerned
because the driver always syncs after the last DMA operation.
Per the spec, these two operations have to be externally
synchronized with VK_PIPELINE_STAGE_TRANSFER_BIT.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
HTILE is supported on these chips, not sure how I missed that.
This restores using PFP_SYNC_ME when LOAD_CONTEXT_REG is not used.
Fixes: f425d9ee74 ("radv: use LOAD_CONTEXT_REG when loading fast clear values")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This avoids syncing the Micro Engine. This is only supported
for VI+ currently. There is probably a way for using
LOAD_CONTEXT_REG on previous chips but that could be done later.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
If the user gives 0 counterBuffers then the driver should still
enable transform feedback on all targets. This changes the
driver to always enable xfb, and use counter buffers where
one is defined for the target in question.
Fixes: b4eb029062 (radv: implement VK_EXT_transform_feedback)
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
In order to handle pause/resume properly, the offset should
be added to the buffer binding not to the begin/end paths.
v2: don't add offset to size
Fixes ext_transform_feedback-alignment* under zink
Fixes: b4eb029062 (radv: implement VK_EXT_transform_feedback)
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This implementation should work and potential bugs can be
fixed during the release candidates window anyway.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Since the CPU can read them we need to execute any GPU->CPU
flushes before the event is written.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108524
Fixes: f4e499ec79 "radv: add initial non-conformant radv vulkan driver"
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This makes it cheaper to just change the dynamic offsets with
the same descriptor sets.
Suggested-by: Philip Rebohle <philip.rebohle@tu-dortmund.de>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
It shouldn't be needed to emit the initial graphics or compute
state when beginning a new command buffer. Emitting them in
the preamble should be enough and this will reduce IB sizes.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Let say, we first bind a graphics pipeline that needs indirect
descriptors sets. The userdata pointers will be emitted at draw
time. Then if we bind a compute pipeline that doesn't need any
indirect descriptors, the driver will re-emit them for all
grpahics stages.
To avoid this to happen, just check the bind point type.
CC: 18.2 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
It's actually just the opposite.
This fixes the new Sascha conditionalrender demo.
CC: 18.2 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Otherwise they are not exported.
CC: 18.2 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Dave Airlie <airlied@redhat.com
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Single-sample color and single-sample depth (not stencil)
are coherent with shaders.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl
We have to do a fast-clear eliminate when clearing DCC
metadata with 0x20202020. I don't know if that fixes anything
but that seems correct to me.
CC: 18.2 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This was missing when VK_EXT_conditional_rendering has been
implemented. The predication type should be -1 to avoid
restoring previous state when performing a decompression pass
with DCC enabled.
Note that we don't have to handle secondary command buffers
because we don't support this feature currently.
CC: 18.2 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
If we have tracing enabled we could do all the tracing emits
and overflow the precalculated cdw_max.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
The driver might emit up to 4 dwords when RADV_TRACE_FILE is
used.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This wasn't wrong but it looks better to me like this. It's
only used for debugging purposes (ie. RADV_TRACE_FILE).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The goal is to use radv_barrier()/radv_subpass_barrier() as
much as possible for further optimizations.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Inherited commands buffers are not supported.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
VK_EXT_conditional_rendering allows to discard draw commands
(not only normal draws).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
VK_EXT_conditional_rendering allows to discard dispatch commands.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
We don't need to emit PS_PARTIAL_FLUSH for the pre fragment shader
stages (ie. geometry/tessellation). Emitting VS_PARTIAL_FLUSH
is enough for these stages. Note that PS_PARTIAL_FLUSH also
synchronizes all vertex stages.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
If we know that the given image doesn't have any metadata,
we don't need to flush.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Now that 'set' can't be NULL because the meta operations no
longer bind a NULL descriptor, the logic can be simplified
a little bit.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
I don't want to waste CPU cycles for nothing.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
We mostly use the same priority for all buffer objects, so
I don't think that matter much. This should reduce CPU
overhead a little bit.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
A ZPASS_DONE or PIXEL_STAT_DUMP_EVENT (of the DB occlusion
counters) must immediately precede every timestamp event to
prevent a GPU hang on GFX9.
Cc: 18.1 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
VkCreateRenderPass2KHR() is quite similar to VkCreateRenderPass()
but refactoring the code is a bit painful.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Needed for VK_KHR_create_renderpass2.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This might fix some synchronization issues. I don't know if
that will affect performance but it's required for correctness.
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
That might reduce CPU overhead a little bit when using
RADV_TRACE_FILE.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The number of enabled descriptors for a given pipeline stage
can be computed at compile time.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
For merged shaders, VS as HS for example.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
If the given image doesn't enable CMASK, FMASK or DCC that's
useless to flush CB metadata.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
If the given image doesn't have HTILE, that's useless to flush
DB metadata.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
GCC 4.8 fails to compile with "static const", while GCC 8.1
fails to compile with only "static".
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Always emitting a bottom-of-pipe event is quite dumb. Instead,
start to optimize these functions by syncing PFP for the
top-of-pipe and syncing ME for the post-index-fetch event.
This can still be improved by emitting EOS events for
syncing PS and CS stages.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This introduces radv_barrier() (same as the draw/dispatch codepath).
This helper is used for merging the code from CmdWaitEvents() and
CmdPipelineBarrier because it's quite similar.
We do ignore the source stage mask for CmdWaitEvents because
it's irrelevant when event objects are used.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The Vulkan spec says:
"pipelineBindPoint is a VkPipelineBindPoint indicating whether
the descriptors will be used by graphics pipelines or compute
pipelines. There is a separate set of bind points for each of
graphics and compute, so binding one does not disturb the other."
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
From the Vulkan spec:
"If this is a primary command buffer, then this value is ignored."
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
If the driver ends up by performing a slow depthstencil clear,
the HTILE metadata won't be initialized correctly.
This fixes random VM faults on Polaris while running CTS
with Bas's runner. This doesn't seem to regress performance.
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Having random data in there is probably not the best.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This might eventually skip some useless DCC decompression
passes.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Drops the number of time we set the scissor by 4x for F1 2017,
which results in a consistent performance improvement of about 4%.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This fixes a rendering regression with RoTR.
This reverts commit 4bdad9fadd.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
And replace _regs by _metadata because it makes more sense.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
I don't think that matter much to emit both values and that
makes the code a bit simpler.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
It's unnecessary to update the fast depth/stencil clear values
if the fast cleared depth/stencil image isn't currently bound.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
And replace _regs by _metadata because it makes more sense.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
It's unnecessary to update the fast color clear values if the
fast cleared color image isn't currently bound.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
On GFX8+, there is a bug that affects TC-compatible depth surfaces
when the ZRange is not reset after LateZ kills pixels.
The workaround is to always set DB_Z_INFO.ZRANGE_PRECISION to match
the last fast clear value. Because the value is set to 1 by default,
we only need to update it when clearing Z to 0.0.
We also need to set the depth clear regs and to update
ZRANGE_PRECISION when initializing a TC-compat depth image to 0.
Original patch from James Legg.
This fixes random CTS fails with
dEQP-VK.renderpass.suballocation.formats.d32_sfloat_s8_uint.input.*
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105396
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This was not previously handled correctly. For example,
push_constant_stages might only contain MESA_SHADER_VERTEX because
only that stage was changed by CmdPushConstants or
CmdBindDescriptorSets.
In that case, if vertex has been merged with tess control, then the
push constant address wouldn't be updated since
pipeline->shaders[MESA_SHADER_VERTEX] would be NULL.
Use radv_get_shader() instead of getting the shader directly so that
we get the right shader if merged. Also, skip emitting the address
redundantly - if two merged stages are set in push_constant_stages
this change would have made the address get emitted twice.
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Cc: "18.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This was being handled in a few different places, consolidate it into a
single radv_get_shader() function.
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Cc: "18.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Errors are not that common of a case so we can eat a slight perf
hit in having to call a function and do a runtime check.
In turn this makes debugging random errors happening for end users
easier, because they don't have to have a debug build on hand.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This was terribly wrong, I forced use of 32-bit pointers when
emitting shader descriptor pointers. This fixes GPU hangs with
LLVM 5&6 because 32-bit pointers are only supported with LLVM 7.
Fixes: 88d1ed0f81 ("radv: emit shader descriptor pointers consecutively")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This reduces the number of SET_SH_REG packets which are emitted
for applications that use more than one descriptor set per stage.
We should be able to emit more SET_SH_REG packets consecutively
(like push constants and vertex buffers for the vertex stage),
but this will be improved later.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Literally the same as the AMD ext.
Passes *indirect_draw_count* CTS tests.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This improves dota2 performance for me by 11% when I force the
GPU DPM level to low (otherwise dota2 is CPU limited for 4k on my
threadripper), which should be a large part of the radv-amdvlk gap.
(For me with that was radv 60.3 -> 66.6, while AMDVLK does about 68
fps)
It looks like dota2 rendered the GUI with a bunch of draws with
a SetScissors before almost each draw, causing a lot of pipeline
stalls.
I'm not really happy with the duplication of code, but overriding
radeon_set_context_reg would also be messy since we have the
pre-recorded pipelines and a bunch of si_cmd_buffer code, as well
as some memory->context reg loads for which things would be more
complicated.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
For future work (support for 32-bit GPU pointers).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Maintaining two different paths is annoying but this gets
rid of the performance regression introduced by the global
BO list.
We might find a better solution in the future, but for now
just keeps two paths.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
In order to reduce a performance regression introduced by
4b13fe55a4 ("radv: Keep a global BO list for VkMemory."),
we are going to maintain two different paths.
One when VK_EXT_descriptor_indexing is enabled by the
application because we need to have a global BO list, and
one (the old one) when it's not enabled.
With Talos on Polaris, the global BO list reduces performance
by 10% which is too much for me.
This reverts commit ab6cadd3ec.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
I have seen a few applications and games do the dynamic buffer bounds incorrectly, this
make it easier to work around, e.g. for debugging.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
DCC implies a fast-clear eliminate, so I think this sounds
reasonable.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Niuwenhuizen <bas@basnieuwenhuizen.nl>
Into radv_handle_color_image_transition().
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Niuwenhuizen <bas@basnieuwenhuizen.nl>
In order to separate initialization from decompression. In the
future, that will allow us to init DCC/FMASK/CMASK in one shot.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Niuwenhuizen <bas@basnieuwenhuizen.nl>
To handle CMASK, FMASK and DCC transitions in the same place.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Niuwenhuizen <bas@basnieuwenhuizen.nl>
Mostly because DCC implies a fast-clear eliminate and we
should be able to skip some DCC decompressions by setting
a predicate like for CMASK and FMASK.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Niuwenhuizen <bas@basnieuwenhuizen.nl>
According to Marek, not enabling it on Stoney has a significant
negative performance impact. (And I guess this might impact
performance on Raven as well)
The register settings are pretty much copied from radeonsi. I did
not put this in the pipeline as that would make the pipeline more
dependent on the format which mean we would have to have more
pipelines for the meta shaders.
v2: Don't clear RB+ regs if not enabled as the CLEAR_STATE packet
does already.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Otherwise, the shader BOs are not added to the list on SI because
prefetching isn't supported. Calling radv_cs_add_buffer() in the
prefetch codepath was a bad idea.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105952
Fixes: 4ad7595f35 ("radv: rename radv_emit_prefetch() to radv_emit_prefetch_L2")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Turo Lamminen <turo@alternativegames.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
As we sometimes reset them to -1, -1 does not mean that they are
not written by the secondary command buffer.
Fixes: ad11fc3571 "radv: don't emit unneeded vertex state."
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Samuel Pitoiset
Nicolai Hähnle
Dave Airlie
Bas Nieuwenhuizen
Marek Olšák
Alex Smith
Grazvydas Ignotas