Introduce a simple PCI identification method of looking up the answer
the /sys filesystem (available on Linux). Attempted after libudev, but
before DRM.
Disabled by default (available only when the --enable-sysfs configure
option is specified).
Signed-off-by: Gary Wong <gtw@gnu.org>
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
Without this, I get linking failures (static linking).
The static linking is sort of required for me, because otherwise Steam and
applications using the Steam runtime regularily fail because my LLVM was
compiled and linked against a newer libgcc_s, libstdc++, etc. and uses
features from those newer versions. And instead of Steam just not
starting, my X starts crashing, whenever libGL fails to load a (32 bit)
driver.
Since I hate crashes of X and I don't think Valve/Steam will behave like
a proper distribution soon (rebuilds versus current Debian Testing, since
they base their Steam OS off that), I need a radeonsi which carries its
own LLVM within and doesn't care about what the runtime sets. This means
linking Mesa statically.
v1 → v2: Move logic to configure.ac
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Define GLX_USE_APPLEGL, as config/darwin used to, to turn on specific code to
use the applegl direct renderer
Convert src/glx/apple/Makefile to automake
Since the applegl libGL is now built by linking libappleglx into libGL, rather
than by linking selected files into a special libGL:
- Remove duplicate code in apple/glxreply.c and apple/apple_glx.c. This makes
apple/glxreply.c empty, so remove it
- Some indirect rendering code is already guarded by !GLX_USE_APPLEGL, but we
need to add those guards to indirect_glx.c, indirect_init.c (via it's
generator), render2.c and vertarr.c so they don't generate anything
Fix and update various includes
glapi_gentable.c (which is only used on darwin), should be included in shared
glapi as well, to provide _glapi_create_table_from_handle()
Note that neither swrast nor indirect is supported in the APPLEGL path at the
moment, which makes things more complex than they need to be. More untangling
is needed to allow that
v2: Correct apple/Makefile.am for srcdir != builddir
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
- Don't require xcb-dri[23] etc. if we aren't building for a target with DRM, as
we won't be using dri[23]
- Enable a more fine-grained control of what DRI code is built, so that a libGL
using direct swrast can be built on targets which don't have DRM.
The HAVE_DRI automake conditional is retired in favour of a number of other
conditionals:
HAVE_DRI2 enables building of code using the DRI2 interface (and possibly DRI3
with HAVE_DRI3)
HAVE_DRISW enables building of DRI swrast
HAVE_DRICOMMON enables building of target-independent DRI code, and also enables
some makefile cases where a more detailled decision is made at a lower level.
HAVE_APPLEDRI enables building of an Apple-specific direct rendering interface,
still which requires additional fixing up to build properly.
v2:
Place xfont.c and drisw_glx.c into correct categories.
Update 'make check' as well
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Fix build for darwin, when ./configured --disable-driglx-direct
- darwin ld doesn't support -Bsymbolic or --version-script, so check if ld
supports those options before using them
- define GLX_ALIAS_UNSUPPORTED as config/darwin used to, as aliasing of non-weak
symbols isn't supported
- default to -with-dri-drivers=swrast
v2:
Use -Wl,-Bsymbolic, as before, not -Bsymbolic
Test that ld --version-script works, rather than just looking for it in ld --help
Don't use -Wl,--no-undefined on darwin, either
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
This patch fixes this build error on Mac OS X.
CCLD libglapi.la
clang: warning: argument unused during compilation: '-pthread'
clang: warning: argument unused during compilation: '-pthread'
ld: unknown option: --no-undefined
clang: error: linker command failed with exit code 1 (use -v to see invocation)
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
-fstack-protector-strong is not supported by clang.
This patch fixes this build error on Fedora 20 with clang.
CXX gallivm/lp_bld_debug.lo
clang: error: unknown argument: '-fstack-protector-strong'
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75010
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
It makes more sense to link the core and common parts of the driver as the
target is build. Additionally this will help us drop duplicating symbols
for targets that static link mulitple pipe-drivers. Only egl-static needs
that currently with more to come.
To simplify things a bit add HAVE_GALLIUM_RADEON_COMMON variable.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Commit 11623be934 was meant to have this hunk, which
I accidently dropped during git rebase.
Cc: 10.2 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jonathan Gray <jsg@jsg.id.au>
Both backends require --enable-dri, and building an empty libgbm
makes little to no sense. Error out at configure to prevent the
user from shooting themselves in the foot.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78225
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Unfortunately, Cygwin defines RTLD_DEFAULT (for glibc compatibility), but can't
provide dladdr(), so add a check for dladdr()
Since I don't think scons is ever used to build for Cygwin, just set HAVE_DLADDR
in SConscript, assuming that if we have RTLD_DEFAULT, we have dladdr().
Cc: Jonathan Gray <jsg@jsg.id.au>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
Rather than defining our own set of variables, use NEED_WINSYS_XLIB
and based on it include the sw/xlib winsys.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The function relies on the sw/dri winsys which is build only when --enable-dri
is set. Fixes build issues with the following config
./configure --disable-dri --with-gallium-drivers=svga --enable-xa
Issue can be reproduced with any hw gallium driver + st that uses the pipe-loader.
Cc: Brian Paul <brianp@vmware.com>
Reported-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
This reverts commit 61bedc3d6b.
As the header is the one defining the API/ABI and is distributed
during installation, we should be using it rather than re-defining
the XA version in configure.ac.
Bump the version in the header to 2.2.0, to reflect what was the
original intent of commit 42158926c6.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
After the loader changes libudev is no longer required for
gbm or the egl drm/wayland platforms. Lets these build/run
on OpenBSD.
v2: preserve the libudev requirement for Linux as suggested
by Emil Velikov.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
With recent commit we started de-duplicating all of the compiler/
linker flags moving their handling inside Automake.inc.
This did not take into consideration that the above variable was set
at configure time, leading to issues on certain build combinations.
Move the variable to where it's used/handled thus cleaning up
configure.ac.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76848
Tested-by: Vinson Lee <vlee@freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The pkg-config module was called "EXPAT" instead of "expat" in
PKG_CHECK_EXISTS. This seems to have been wrong because the wrong
argument was copied from PKG_CHECK_MODULES.
Cc: "10.0" "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
The xa version number had to be set in two places. In configure.ac and in
xa_tracker.h. Furthermore, xa_tracker.h is an installed header so we can't
use mesa internal defines. So therefore, at configure time, modify the
xa_tracker.h header to use the version given by configure.ac
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
By doing GC the linker removes all the symbols that are not referenced
and/or used by the final library. This results in a saving of ~100K
up-to ~600K per (stripped) binary (classic vs gallium drivers).
If interested one can ask the compiler to print the sections that are
removed using -Wl,--print-gc-sections.
v2: Check if ld supports the flag before using it.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Matt Turner <mattst88@gmail.com> (v1)
It makes little sense to enable the vdpau, xvmc and omx state-trackers
as they do not make use of (don't work with) the software driver.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
grep -q is easier to read and consistent with the rest of configure.ac.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Gallium osmesa links against the softpipe driver, thus the build
will fail if it's missing.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Matt Turner <mattst88@gmail.com>
Evidently at least static OSMesa is still used as shared one
causes substantial increase in the load time for some programs
that use it (from seconds up-to ~30min).
Rather than forcing everyone to use shared mesa, revert commit
a6efbac9fb and default to shared
build when both shared and static are disabled.
v2: Whitespace cleanup, drop silly comment.
Reported-by: Burlen Loring <burlen.loring@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Currently only linux can make use of dri3, so it would make sense to
enable it explicitly for the platform.
Drop a duplicated libudev check while we're at it.
v3: Properly handle dri3 and reword commit message.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76377
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
It is quite hard to meet the dependency of the libxml2 python bindings
outside Linux, and in particularly on MacOSX; whereas ElementTree is
part of Python's standard library. ElementTree is more limited than
libxml2: no DTD verification, defaults from DTD, or XInclude support,
but none of these limitations is serious enough to justify using
libxml2.
In fact, it was easier to refactor the code to use ElementTree than to
try to get libxml2 python bindings.
In the process, gl_item_factory class was refactored so that there is
one method for each kind of object to be created, as it simplifies
things substantially.
I confirmed that precisely the same output is generated for GL/GLX/GLES.
v2: Remove m4/ax_python_module.m4 as suggested by Matt Turner.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This reverts commit d9b983519c.
Unfortunately it seems like rpath is evaluated before LD_LIBRARY_PATH,
so this breaks e.g. steam, as well as any other user of that env var,
if the llvm path happens to be where other libs also reside.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76082
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Static and shared builds were possible in the good old days
of static makefiles. Currently the build system does not
distinguish nor does anything special when one requests a
static build.
Print a warning message for the packager that static builds
are not supported and continue building shared libs.
Currently only Debian and derivatives use static build, and
they use it for building a Xlib powered libGL. This patch
will only change the warning message they are seeing but
the binaries produced will be identical.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
- As of commit cb080a10b68(configure.ac: Don't require shared LLVM when
building OpenCL) opencl does not mandate using shared llvm.
- Add a warning message that building with static llvm may cause
compilation problems.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Currenly configure.ac will print a warning when one is missing the package.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Christian König <christian.koenig@amd.com>
The primary users of these are linux developers, although
it can be extended for *BSD and others if needed.
Fixes make install for Cygwin and OpenBSD at least.
v2:
- Wrap vdpau targets as well.
v3:
- Fold HAVE_COMPAT_SYMLINKS conditional within install*links.mk
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=63269
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk> (v1)
Reviewed-by: Christian König <christian.koenig@amd.com>
Some platforms different library extension - dll, dylib, a.
Honor that when we are creating the required links.
Rename LIB_EXTENSION to LIB_EXT while we're here.
With libglapi linking aside, building classic drivers on
non-linux platforms should be possible now.
v2: Resolve conflicts.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
All the variables were used before the automake conversion
and do not make sense (nor are used) currently.
Replace GL_LIB_NAME with lib$(GL_LIB).$(LIB_EXTENSION) for
apple-glx. The build has been broken for ages, but this will
ease the recovery process as it happens.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
The loader infrastructure for everything but DRI2 requires that udev be
present, so we can figure out an appropriate driver from the fd. We don't
have a portable solution yet, but presumably it will have similar lookup
based on the device node.
It will also be even more required for krh's udev-based hwdb support,
which lets us have a loader that actually loads DRI drivers not included
in the loader's source distribution.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75212
Reviewed-by: Matt Turner <mattst88@gmail.com>
`--enable-llvm-shared-libs` option was recently renamed as
`--with-llvm-shared-libs`, but several error messages still mention the
old option, causing confusing.
Trivial.
With commit 0432aa064b(configure: use shared-glapi when more than one
gl* API is used) we removed "disable shared-glapi when building without
dri" hunk.
In the good old days of classic mesa, dri and xlib-glx were mutually
exclusive thus the hunk made sense.
Currently enable-dri is used as a synonym for a range of things thus
it's more appropriate to handle xlib-glx explicitly.
Fixes a missing symbol '_glapi_Dispatch' in a xlib powered libGL,
build using the following
./autogen.sh --enable-xlib-glx --disable-dri --with-gallium-drivers=swrast
Cc: Brian Paul <brianp@vmware.com>
Reported-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
This way, we are left with only the preprocessor flags and '-std=X'
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
GLX can be either dri or xlib based, while enable_dri is
used in a variety of contexts.
With enable_dri_glx the context is clearly visible.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
All hardware drivers including the virtual vmwgfx require
the drm pipe-loader in order to be properly loaded by xa,
gbm and opencl.
Note this does _not_ add support for the above three it only
allows the pipe driver to be loaded by the library.
Eg. GBM will now properly open the pipe-i915 driver, should
one be working on the such hardware.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75453
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Building to provide accelration using swrast does not make
sense.
Note: update your build script to explicitly mention svga
in the gallium drivers list, if you are building the vmwgfx
xa library.
v2: Update error message to provide more clarify, add an example.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Recent patch converted our logic to use test -n and test -z.
An emptry string variable (empty_str="") return true for both
thus making the check unreliable.
Fix this by correctly setting the variable when applicable.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>