Patch propagates given scale_factors to lowering options.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The original idea was that the backend compiler could eliminate
surfaces, so we would have it mark which ones are actually used,
then shrink the binding table accordingly. Unfortunately, it's a
pretty blunt mechanism - it can only prune things from the end,
not the middle - since we decide the layout before we even start
the backend compiler, and only limit the size. It also basically
gives up if it sees indirect array access.
Besides, we do the vast majority of our surface elimination in NIR
anyway, not the backend - and I don't see that trend changing any
time soon. Vulkan abandoned this plan a long time ago, and I don't
use it in Iris, but it's still been kicking around in i965.
I hacked shader-db to print the binding table size in bytes, and
observed no changes with this patch. So, this code appears to do
nothing useful.
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
This moves nir_shader_clone() to the driver-specific compile function,
rather than the shared src/intel/compiler code. This allows i965 to do
key-specific passes before calling brw_compile_*. Vulkan should not
need this cloning as it doesn't compile multiple variants.
We do need to continue cloning in the compute shader code because we
lower various things in NIR based on the SIMD width.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Now that the drivers are lowering to surface indices themselves, we no
longer need to push the surface index into the shader.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
During code review, Jason pointed out that:
2b3064c073 "i965, anv: Use INTEL_DEBUG for disk_cache driver flags"
Didn't account for INTEL_SCALER_* environment variables.
To fix this, let the compiler return the disk_cache driver flags.
Another possible fix would be to pull the INTEL_SCALER_* into
INTEL_DEBUG bits, but as we are currently using 41 of 64 bits, I
didn't think it was a good use of 4 more of these bits. (5 since
INTEL_PRECISE_TRIG needs to be accounted for as well.)
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Instead of just looking at the number of color attachments, look at
which ones are actually used by the subpass. This lets us potentially
throw away chunks of the fragment shader. In DXVK, for example, all
subpasses have 8 attachments and most are VK_ATTACHMENT_UNUSED so this
is very helpful in that case.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
According to RenderDoc, this shaves 99.6% of the run time off of the
ambient occlusion pass in Skyrim Special Edition when running under DXVK
and shaves 92% off the runtime for a reasonably representative frame.
When running the actual game, Skyrim goes from being a slide-show to a
very stable and playable framerate on my SKL GT4e machine.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The pixel shader dispatch table is kind-of a confusing mess. This adds
some helpers for dealing with it and for easily extracting the correct
data from wm_prog_data.
Reviewed-by: Matt Turner <mattst88@gmail.com>
- remove mtypes.h from most header files
- add main/menums.h for often used definitions
- remove main/core.h
v2: fix radv build
Reviewed-by: Brian Paul <brianp@vmware.com>
Rafael ran piglit with the test code enabled and saw no additional GPU
hangs.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This requires us to bump the subgroup size to 32 for all shader stages
because Vulkan requires that to be a physical device query.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
This is part of the device groups extension/feature but it's a decent
chunk of work in its own right so it's worth breaking into its own
patch. The mechanism we use is fairly straightforward: we just push the
base work group id into the shader and add it to the work group id we
get from dispatch.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Split out the device info so isl doesn't depend on intel/common. Now
it will depend on the new intel/dev device info lib.
This will allow the decoder in intel/common to use isl, allowing us to
apply Ken's patch that removes the genxml duplication of surface
formats.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
We have to start render targets at binding table index 0 in order to use
headerless FB write messages, and in fact already assume this in a bunch
of places in the code. Let's finish that off, and not bother storing 0
in a struct to pretend to add it in a few places.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Older OpenGL defines two equations for converting from signed-normalized
to floating point data. These are:
f = (2c + 1)/(2^b - 1) (equation 2.2)
f = max{c/2^(b-1) - 1), -1.0} (equation 2.3)
Both OpenGL 4.2+ and OpenGL ES 3.0+ mandate that equation 2.3 is to be
used in all scenarios, and remove equation 2.2. DirectX uses equation
2.3 as well. Intel hardware only supports equation 2.3, so Gen7.5+
systems that use the vertex fetcher hardware to do the conversions
always get formula 2.3.
This can make a big difference for 10-10-10-2 formats - the 2-bit value
can represent 0 with equation 2.3, and cannot with equation 2.2.
Ivybridge and older were using equation 2.2 for OpenGL, and 2.3 for ES.
Now that Ivybridge supports OpenGL 4.2, this is wrong - we need to use
the new rules, at least in core profile. That would leave Gen4-6 doing
something different than all other hardware, which seems...lame.
With context version promotion, applications that requested a pre-4.2
context may get promoted to 4.2, and thus get the new rules. Zero cases
have been reported of this being a problem. However, we've received a
report that following the old rules breaks expectations. SuperTuxKart
apparently renders the cars red when following equation 2.2, and works
correctly when following equation 2.3:
https://github.com/supertuxkart/stk-code/issues/2885#issuecomment-353858405
So, this patch deletes the legacy equation 2.2 support entirely, making
all hardware and APIs consistently use the new equation 2.3 rules.
If we ever find an application that truly requires the old formula, then
we'd likely want that application to work on modern hardware, too. We'd
likely restore this support as a driconf option. Until then, drop it.
This commit will regress Piglit's draw-vertices-2101010 test on
pre-Haswell without the corresponding Piglit patch to accept either
formula (commit 35daaa1695ea01eb85bc02f9be9b6ebd1a7113a1):
draw-vertices-2101010: Accept either SNORM conversion formula.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chris Forbes <chrisforbes@google.com>
We use the same hardware mechanism for both atomic counters and SSBO
atomics, so there's really no benefit to maintaining separate code to
handle each case. Instead, we can just use Rob's shiny new NIR pass to
convert atomic_uints to SSBOs, and delete piles of code.
The ssbo_start section of the binding table becomes a combined ABO and
SSBO section, with ABOs first, then SSBOs.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We're going to want subgroup ID for SPIR-V subgroups eventually anyway.
We really only want to push one and calculate the other from it. It
makes a bit more sense to push the subgroup ID because it's simpler to
calculate and because it's a real API thing. The only advantage to
pushing the base thread ID is to avoid a single SHL in the shader.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
The caller can now use brw_stage_prog_data::program_size which is set
by the brw_compile_* functions.
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This will be used by the on disk shader cache.
v2:
* Set in brw_compile_* rather than brw_codegen_*. (Jason)
Signed-off-by: Timothy Arceri <timothy.arceri@collabora.com>
[jordan.l.justen@intel.com: Only add to brw_stage_prog_data]
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This is a lot more natural than special casing it all over the place.
We still have to do a bit of special-casing in assign_constant_locations
but it's not special-cased quite as bad as it was before.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The Vulkan driver does not support pull constants. It simply limits
things such that we can always push everything. Previously, we were
determining whether or not to push things based on whether or not the
prog_data::pull_param array is non-null. This is rather hackish and
about to stop working.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This burns an extra 10k of memory or so in the case where you don't have
any images. However, if you have several shaders which use images, this
should be much less memory. It also gets rid of a part of prog_data
that really has nothing to do with the compiler.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This moves us away to the array of pointers model and onto a model where
each param is represented by a generic uint32_t handle. We reserve 2^16
of these handles for builtins that get generated by somewhere inside the
compiler and have well-defined meanings. Generic params have handles
whose meanings are defined by the driver.
The primary downside to this new approach is that it moves a little bit
of the work that we would normally do at compile time to draw time. On
my laptop this hurts OglBatch6 by no more than 1% and doesn't seem to
have any measurable affect on OglBatch7. So, while this may come back
to bite us, it doesn't look too bad.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We can start reading the URB at the first offset that contains varyings
that are actually read in the URB. We still need to make sure that we
read at least one varying to honor hardware requirements.
This helps alleviate a problem introduced with 99df02ca26 for
separate shader objects: without separate shader objects we assign
locations sequentially, however, since that commit we have changed the
method for SSO so that the VUE slot assigned depends on the number of
builtin slots plus the location assigned to the varying. This fixed
layout is intended to help SSO programs by avoiding on-the-fly recompiles
when swapping out shaders, however, it also means that if a varying uses
a large location number close to the maximum allowed by the SF/FS units
(31), then the offset introduced by the number of builtin slots can push
the location outside the range and trigger an assertion.
This problem is affecting at least the following CTS tests for
enhanced layouts:
KHR-GL45.enhanced_layouts.varying_array_components
KHR-GL45.enhanced_layouts.varying_array_locations
KHR-GL45.enhanced_layouts.varying_components
KHR-GL45.enhanced_layouts.varying_locations
which use SSO and the the location layout qualifier to select such
location numbers explicitly.
This change helps these tests because for SSO we always have to include
things such as VARYING_SLOT_CLIP_DIST{0,1} even if the fragment shader is
very unlikely to read them, so by doing this we free builtin slots from
the fixed VUE layout and we avoid the tests to crash in this scenario.
Of course, this is not a proper fix, we'd still run into problems if someone
tries to use an explicit max location and read gl_ViewportIndex, gl_LayerID or
gl_CullDistancein in the FS, but that would be a much less common bug and we
can probably wait to see if anyone actually runs into that situation in a real
world scenario before making the decision that more aggresive changes are
required to support this without reverting 99df02ca26.
v2:
- Add a debug message when we skip clip distances (Ilia)
- we also need to account for this when we compute the urb setup
for the fragment shader stage, so add a compiler util to compute
the first slot that we need to read from the URB instead of
replicating the logic in both places.
v3:
- Make the util more generic so it can account for all unused slots
at the beginning of the URB, that will make it more useful (Ken).
- Drop the debug message, it was not what Ilia was asking for.
Suggested-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Mesa will map user defined vertex input attributes to slots
starting at VERT_ATTRIB_GENERIC0 which gives us room for only 16
slots (up to GL_VERT_ATTRIB_MAX). This sufficient for GL, where
we expose exactly 16 vertex attributes for user defined inputs, but
in Vulkan we can expose up to 28 (which are also mapped from
VERT_ATTRIB_GENERIC0 onwards) so we need to account for this when
we scope the size of the array of attribute workaround flags
that is used during the brw_vertex_workarounds NIR pass. This
prevents out-of-bounds accesses in that array for NIR shaders
that use more than 16 vertex input attributes.
Fixes:
dEQP-VK.pipeline.vertex_input.max_attributes.*
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This adds a NIR pass that decides which portions of UBOS we should
upload as push constants, rather than pull constants.
v2: Switch to uint16_t for the UBO block number, because we may
have a lot of them in Vulkan (suggested by Jason). Add more
comments about bitfield trickery (requested by Matt).
v3: Skip vec4 stages for now...I haven't finished wiring up support
in the vec4 backend, and so pushing the data but not using it
will just be wasteful.
Reviewed-by: Matt Turner <mattst88@gmail.com>
By default, 3DSTATE_CONSTANT_* Constant Buffer 0 is relative to dynamic
state base address. This makes it unusable for pushing UBOs. I'd like
to be able to use all four push buffers.
There is a bit in the INSTPM register (or CS_DEBUG_MODE2 on Skylake)
which controls whether buffer 0 is relative to dynamic state base
address, or simply a normal pointer. Setting that gives us full
flexibility.
We can't currently write this on Haswell and earlier, and will need
to update the kernel command parser, and then do the whole version
checking song and dance.
Reviewed-by: Matt Turner <mattst88@gmail.com>
These enums live inside struct brw_wm_prog_data, so it makes sense to
keep them in the same header. It also allows to use them without
including brw_eu_defines.h.
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We need to know if sample shading has been requested during shader
compilation since that affects the way fragment coordinates are
computed.
Notice that the semantics of fragment coordinates only depend on
whether sample shading has been requested, not on whether more
than one sample will actually be produced (that is,
minSampleShading and rasterizationSamples do not affect this
behavior).
Because this setting affects the code we generate for the shader, we also
need to include it in the WM prog key. Notice we don't need to alter the
OpenGL code because it doesn't ever use this behavior, so they key's
value is always false (the default).
Fixes:
dEQP-VK.glsl.builtin_var.fragcoord_msaa.*
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Tapani Pälli
Kenneth Graunke
Lionel Landwerlin
Jason Ekstrand
Jordan Justen
Francisco Jerez
Antia Puentes
Neil Roberts
Marek Olšák
Anuj Phogat
Ian Romanick
Carl Worth
Iago Toral Quiroga
Johnson Lin
Rafael Antognolli
Emil Velikov