Recently more files were removed from control to be auto-generated
in the dricore library. Android build was not able to locate the
new files if they were not created beforehand.
LOCAL_SRC_FILES includes some of those files and Android.gen.mk
re-defines this variable by filtering out the auto-generated files.
Unfortunately for this variable it is not the same to have the SRCDIR
variable defined as the current directory.
By re-defining SRCDIR for the autotools build the Android build system
is happy again and the new files were actually removed from the sources
to use the auto generated versions.
Also patch d5c1801a01 was partially reverted as the files
can not be compiled to the LOCAL_PATH, instead they should live on the
intermediates folder so that a clean can wipe them out.
v3: [chad] Fix the definition of SRCDIR in libdricore/Makefile.am.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Signed-off-by: Daniel Charles <daniel.charles@intel.com>
XGetImage() will generate a BadMatch error if the source window isn't
visible. When that happens, create a new XImage. Fixes piglit 'select'
test failures with swrast/xlib driver.
NOTE: This is a candidate for the 8.0 branch.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Always allocate space for the inverse matrix in _math_matrix_ctr()
since we were always calling _math_matrix_alloc_inv() anyway.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
When computing a matrix inverse, if the determinant is too small we could hit
a divide by zero. There's a check to prevent this (we basically give up on
computing the inverse and return the identity matrix.) This patch loosens
this test to fix a lighting bug reported by Lars Henning Wendt.
v2: use abs(det) to handle negative values
NOTE: This is a candidate for the 8.0 branch.
Tested-by: Lars Henning Wendt <lars.henning.wendt@gris.tu-darmstadt.de>
The sendc instruction causes the fragment shader thread to wait for
any dependent threads (i.e. threads rendering to overlapping pixels)
to complete before sending the message. We need to use sendc on the
first render target write in order to guarantee that fragment shader
outputs are written to the render target in the correct order.
Previously, we only used the "sendc" instruction when writing to
binding table index 0. This did the right thing for fragment shaders,
because our fragment shader back-ends always issue their first render
target write to binding table index 0. However, it did the wrong
thing for blorp, which performs its render target writes to binding
table index 1.
A more robust solution is to use sendc for all render target writes.
This should not produce any performance penalty, since after the first
sendc, all of the dependent threads will have completed.
For more information about sendc, see the Ivy Bridge PRM, Vol4 Part3
p218 (sendc - Conditional Send Message), and p54 (TDR Registers).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
A lot of code was still differentiating between between winsys and
user fbos by testing the fbo's name against zero. This converts
everything in the i915 and 965 drivers over to use _mesa_is_user_fbo()
and _mesa_is_winsys_fbo().
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
A lot of code was still differentiating between between winsys and
user fbos by testing the fbo's name against zero. This converts
everything in core mesa, the state tracker, and src/mesa/program over
to use _mesa_is_user_fbo() and _mesa_is_winsys_fbo().
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The OpenGL(R) ES Shading Language
Version 1.00 Revision 17 (12 May, 2009)
> 4.6.1 The Invariant Qualifier
> ... To force all output variables to be invariant, use the pragma
> #pragma STDGL invariant(all)
Signed-off-by: Oliver McFadden <oliver.mcfadden@linux.intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
We already provided these files on 'make install', but only created a
'libglapi.so' in the top-level lib/ convenience folder. We used to
create all three, but at some point in the build system churn, it broke.
Various applications (like the ES2 conformance suite) seem to link
against libglapi.so.0, so without these links, setting LD_LIBRARY_PATH
and LIBGL_DRIVERS_PATH can lead to using /usr/lib/libglapi.so.0 with
/home/whatever/libGL.so, which leads to API calls getting routed
incorrectly (i.e. glCompileShader -> _mesa_LinkProgramARB), which leads
to rage problems.
Preserve developer sanity...install links.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Ever since ctx->NativeIntegers was set, the conversion flag has been
PARAM_NO_CONVERT.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Since osmesa now has been converted to Makefile.am, an appropriate install: rule
is generated to install the shared libary, so we no longer need to do that in
src/mesa/Makefile.old
This leaves nothing in src/mesa/Makefile.old but the tags: rule, so move that to
Makefile.am and remove Makefile.old
Also, nothing now uses OSMESA_LIB_GLOB anymore, so remove it
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Commit 6c6803f28d removed xm_image.[ch], and removed
xm_image.c, but not xm_image.h from the Makefile, this was subsequently carried over
into Makefile.am
Remove xm_image.h from Makfile.am. This allows 'make dist' to succeed, even if it
doesn't do anything useful
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
"Use -no-undefined to assure libtool that the library has no
unresolved symbols at link time, so that libtool will build a shared
library on platforms require that all symbols are resolved when the
library is linked."
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
"Use -no-undefined to assure libtool that the library has no
unresolved symbols at link time, so that libtool will build a shared
library on platforms require that all symbols are resolved when the
library is linked."
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
MCS buffers use 32 bits per pixel in 8x MSAA, and 8 bits per pixel in
4x MSAA. This patch adjusts the format we use to allocate the buffer
so that enough memory is set aside for 8x MSAA.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The code to emit 3DSTATE_SAMPLE_MASK was already correct for 8x
MSAA--this patch just removes an assertion that would have prevented
it from being used for 8x MSAA.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This patch updates the blorp functions encode_msaa() and decode_msaa()
to properly handle the encoding of IMS MSAA buffers when
num_samples=8.
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
When operating in persample dispatch mode, the blorp engine would
previously assume that subspan N always represented sample N (this is
correct assuming 4x MSAA and a 16-wide dispatch). In order to support
8x MSAA, we must compute which sample is associated with each subspan,
using the "Starting Sample Pair Index" field in the thread payload.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
When rendering to an IMS MSAA surface on Gen7, blorp sets up the
rendering pipeline as though it were rendering to a single-sampled
surface; accordingly it must adjust the size of the primitive it sends
down the pipeline to account for the interleaving of samples in an IMS
surface.
This patch modifies the size adjustment code to properly handle 8x
MSAA, which makes room for the extra samples by using an interleaving
pattern that is twice as wide as 4x MSAA.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This patch adds a num_samples argument to the blorp function
manual_blend(), allowing it to be told how many samples need to be
blended together. Previously it assumed 4x MSAA, since that was all
we supported.
We also bump up LOG2_MAX_BLEND_SAMPLES from 2 to 3, so that
manual_blend() will be able to handle 8x MSAA.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
When the client program uses glDrawBuffer() or glDrawBuffers() to
select more than one color buffer for drawing into, and then performs
a blit, we need to blit into every single enabled draw buffer.
+2 oglconforms.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50407
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
This patch rearranges the order of steps performed by a blorp blit
from this:
- Sync up state of window system buffers.
- Find buffers.
- Find miptrees.
- Make sure buffer formats match.
- Handle mirroring.
- Make sure width and height match.
- Handle clipping/scissoring.
- Account for window system origin conventions.
- Do depth resolves, if applicable.
- Do the blit.
- Record the need for a future HiZ resolve, if applicable.
To this:
- Sync up state of window system buffers.
- Handle mirroring.
- Make sure width and height match.
- Handle clipping/scissoring.
- Account for window system origin conventions.
- Find buffers.
- Make sure buffer formats match.
- Find miptrees.
- Do depth resolves, if applicable.
- Do the blit.
- Record the need for a future HiZ resolve, if applicable.
The steps are the same, but they are now performed in an order that
will make it possible to implement correct DrawBuffers support. Note
that the last four steps are now in a separate function
(do_blorp_blit), since they will need to be executed repeatedly when
DrawBuffers support is added.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Previously, the blorp engine would fall back to swrast if the source
or destination of a blit had no associated miptree. This was
unnecessary, since _mesa_BlitFramebufferEXT() already takes care of
making the blit silently succeed if there are no buffers bound, so the
fallback paths could never actually happen in practice.
Removing these fallback paths will simplify the implementation of
correct DrawBuffers support in blorp.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
This patch modifies the order of operations in the blorp engine so
that clipping and scissoring are performed before adjusting the
coordinates to account for the difference in origin convention between
window system buffers and framebuffer objects. Previously, we would
do clipping and scissoring after adjusting for origin conventions, so
we would get scissoring wrong in window system buffers.
Fixes Piglit test "fbo-scissor-blit window".
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
When checking that the source and destination dimensions match, we
don't need to store the width and height in variables; doing so just
risks confusion since right after the check, we do clipping and
scissoring, which may alter the width and height.
No functional change.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
On Gen6, multisampled null render targets don't seem to work
properly--they cause the GPU to hang. So, as a workaround, we render
into a dummy color buffer.
Fortunately this situation (multisampled rendering without a color
buffer) is rare, and we don't have to waste too much memory, because
we can give the workaround buffer a very small pitch.
Fixes piglit test "EXT_framebuffer_multisample/no-color {2,4}
depth-computed *" on Gen6.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
The HW docs say that the width and height of null render targets need
to match the width and height of the corresponding depth and/or
stencil buffers, and that they need to be marked as Y-tiled. Although
leaving these values at 0 doesn't seem to cause any ill effects, it
seems wise to follow the documented requirements.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Previously, we used the number of samples in draw buffer 0 to
determine whether to set up the 3D pipeline for multisampling. Using
the visual is cleaner, and has the benefit of working properly when
there is no color buffer.
Fixes all piglit tests "EXT_framebuffer_multisample/no-color" on Gen7.
On Gen6, the "depth-computed" variants of these tests still fail; this
will be addresed in a later patch.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
This patch ensures that Visual.samples and Visual.sampleBuffers are
set correctly even in the case where there is no color buffer.
Previously, these values would retain their default value of 0 in this
circumstance, even if the depth or stencil buffer was multisampled.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Mesa misses a few checks when compiling on a uclibc system
which cause it to fall back on glibc-ism. This patch
addresses those issues.
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
The kernel streamout support was supposed to get into 3.3 along
the tiling change and thus use the same kernel version bump of
2.13 to report userspace that streamout register were supported.
This is not what happen. So as streamout kernel support did not
bump the kernel driver version, rely on kernel 2.14 version bump
to know if streamout is enabled or not. Which means you need at
least 3.4 kernel.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
The error was being set on the non-error path, rather
than the error path.
NOTE: This is a candidate for the 8.0 branch.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
For 'non-legacy' contexts we will want to generate an error
if an uninstalled function is called.
The effect of this change will be that we can avoid installing
legacy functions, and they will then generate an error as
needed for deprecated functions in GL >= 3.1.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>