Improves VS state change microbenchmark performance by 7.08729% +/-
1.22289% (n=10) on gen7, because we don't upload the 64 dwords of
unused binding table any more.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This is a step toward making the samplers/binding tables reflect
sampler uniform mappings instead of embedding those in the programs.
No significant performance difference on the microbenchmark (n=10).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We always say no. Improves VS state change microbenchmark performance
7.68747% +/- 1.40826% (n=10).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
With this and the previous patch, 640x480 nexuiz is running 0.169118%
+/- 0.0863696% faster (n=121). On a VS state change microbenchmark,
performance is increased 8.28645% +/- 0.460478% (n=52).
v2: Fix CACHE_NEW_VS comment.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This reduces recomputation of state based on non-clipping-related
transform changes, and is a step toward removing VUE map
recomputation.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
For a 1D texture array, the border only applies to the width. For a 2D
texture array the border applies to the width and height but not the depth.
Sucha cases were not handled correctly in _mesa_init_teximage_fields().
Note: This is a candidate for stable branches
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Tracing function entry/exits is a bit pointless
when VDPAU_TRACE=1 does the same thing.
v2: use WARN instead of ERR for application problems
Signed-off-by: Christian König <deathsimple@vodafone.de>
Like TGSI_OPCODE_ARL, destination should be an integer.
This fixes invalid LLVM IR on an internal state tracker (currently Mesa
never emits this opcode).
In the future consider making ADDR register also a integer-as-float array,
like all other register kinds, or simply replace ADDR & ARR/ARL with
integer temp and instructions.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Fixes this GCC warning.
native_drm.c:153:1: warning: ‘drm_display_authenticate’ defined but not
used [-Wunused-function]
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Avoid setting dirty state flags when enabling or disabling a vertex
attribute arrays when there's no change.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
If you're resorting to the dummy shader, you've probably already turned
off SIMD16 mode. But if you didn't, it would die in a fire.
We could either fail to compile in SIMD16 mode...or just fix it.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
The dummy FB write failed to specify EOT and a message length, causing
the GPU to hang. Now we can enjoy "everyone's favorite color" again.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Fixes this GCC warning.
mask.c: In function ‘mask_layer_fill’:
mask.c:387:12: warning: variable ‘alpha_color’ set but not used
[-Wunused-but-set-variable]
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Fixes these GCC warnings.
glx_api.c: In function ‘choose_visual’:
glx_api.c:678:8: warning: variable ‘trans_value’ set but not used
[-Wunused-but-set-variable]
glx_api.c:677:8: warning: variable ‘trans_type’ set but not used
[-Wunused-but-set-variable]
glx_api.c:663:8: warning: variable ‘min_ci’ set but not used
[-Wunused-but-set-variable]
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Now that we have a index_range_invalid flag, we can just use that rather
than calling vbo_validated_drawrangeelements directly and returning.
NOTE: This is a candidate for release branches.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
This failed to take basevertex into account:
If basevertex < 0:
(end + basevertex) might actually be in-bounds while 'end' is not.
We would have clamped in this case when we probably shouldn't.
This could break application drawing.
If basevertex > 0:
'end' might be in-bounds while (end + basevertex) might not.
We would have failed to clamp in this place. There's a comment
indicating the TNL module depends on max_index being in-bounds;
if so, it would likely break horribly.
Rather than trying to clamp correctly in the face of basevertex, simply
delete the clamping code and indicate that we don't have a valid range.
This causes _tnl_vbo_draw_prims to use vbo_get_minmax_indices() to
compute the actual bounds, which is much safer.
NOTE: This is a candidate for release branches.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
The application supplied [start, end] range is merely a conservative
hint of the ranges of index values inside the index buffer. There is no
requirement that all vertices in the range [start, end] be referenced.
Passing an 'end' value larger than the maximum legal index is perfectly
acceptible; applications can legally pass 0xffffffff when they don't
have a tighter bound readily available.
Thus, the warning doesn't indicate a correctness issue; it could only
indicate a performance issue. However, it does not even do that.
glDrawRangeElements is designed to optimize non-VBO vertex data uploads
by providing an upper bound on the size of buffers a driver would need
to allocate. With VBOs, the data is already in an uploaded buffer, so
the range doesn't help.
The clincher is: we only know _MaxElement for VBOs. For user-space
arrays, we just set it to 2,000,000,000 (see mesa/main/varray.h:63.)
So we can only check this in the case where it is not useful.
Many applications, including the Unigine demos, currently trigger this
warning, which suggests the applications are buggy when they're actually
fine. Eliminating the warning should confuse users less while not
actually losing any benefit to application developers.
NOTE: This is a candidate for release branches.
Suggested-by: Jose Fonseca <jfonseca@vmware.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
There's a serious trap for drivers: RenderTexture() does not indicate
that the texture is currently bound to the draw buffer, despite
FinishRenderTexture() signaling that the texture is just now being
unbound from the draw buffer.
We were acting as if RenderTexture() *was* the start of rendering and
that we could make texturing incoherent with the current contents of
the renderbuffer. This caused intel oglconform sRGB
Mipmap.1D_textures to fail, because we got a call to TexImage() and
thus RenderTexture() on a texture bound to a framebuffer that wasn't
the draw buffer, so we skipped validating the new image into the
texture object used for rendering.
We can't (easily) make RenderTexture() indicate the start of drawing,
because both our driver and gallium are using it as the moment to set
up the renderbuffer wrapper used for things like MapRenderbuffer().
Instead, postpone the setup of the workaround render target miptree
until update_renderbuffer time, so that we no longer need to skip
validation of miptrees used as render targets. As a bonus, this
should make GL_NV_texture_barrier possible.
(This also fixes a regression in the gen4 small-mipmap rendering since
3b38b33c16, which switched
set_draw_offset from image->mt to irb->mt but didn't move the irb->mt
replacement up before set_draw_offset).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44961
NOTE: This is a candidate for the 8.0 branch.
Infer from the operand the type of value to store.
MOV is untyped but we use the float store path.
v2: make MOV use float store path.
I've had to squash merge the ARL fix to be stored
as an integer in here to avoid regressions in a number
of piglit tests.
From now on ARL stores to an integer just like HW does.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The infers the type of data required using the opcode,
and casts the input to the appropriate type.
So far this only handles non-indirect constant and temporaries.
v2: as per Jose suggestion, fetch immediates via floats
Signed-off-by: Dave Airlie <airlied@redhat.com>
These are used inside the action handlers for the integer opcodes.
v2: use uint_bld/int_bld, drop higher level uint_bld.
Signed-off-by: Dave Airlie <airlied@redhat.com>
For now just pass the current context, but when we want to
store int or unsigned we need to pass those later.
Signed-off-by: Dave Airlie <airlied@redhat.com>
These two functions produce the src/dst types for an opcode.
MOV is special since it can be used to mov float->float and int->int,
so just return VOID.
v2: use a new enum for the opcode type as per Jose's suggestion.
Signed-off-by: Dave Airlie <airlied@redhat.com>