This passes conformance on both the master and 4.6.0 (with patches)
branches. I'll be submitting results shortly from the 20.2.x branch
this lands in.
Cc: "20.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6044>
/glcts --deqp-surface-width=1024 --deqp-surface-height=64 --deqp-case=KHR-GL45.texture_view.view_sampling --deqp-surface-type=fbo
was failing but only for width 1024.
The test was filling a 4x4 ms texture, but leaving the viewport set to 1024x64.
This was resulting in this code incorrectly sign extending a value, and passing
it into the mask generator and getting the wrong values. Explicit cast
avoids the sign extension and fixes the above test.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6006>
Turning on robust buffer access enables GLES 3.2, also
finished GL 4.3 support.
The post depth coverage fail is expected, it's a test bug
This also introduce a fail in the invalid flag test that I can't reproduce out of CI.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5971>
I hadn't realised these were disabled, llvmpipe now exposes this extension.
One additional failure is fine to get the added testing coverage.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5973>
This fixes:
GTF-GL45.gtf33.GL3Tests.vertex_type_2_10_10_10_rev.vertex_type_2_10_10_10_rev_conversion
and
piglit
spec/arb_texture_view/rendering-formats/clear gl_rgba8_snorm as gl_r32f
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5820>
The old code updated the viewport index on the first vertex in
a primitive, however it was picking the first vertex wrong
when used with geometry shaders.
This code has access to the prim info with the primitive lengths
so instead keep track of when a new primitive starts by tracking
the lengths and updating the viewport index then. The prim info
is only valid after a GS or prim assembly, so enable prim assembly
if a vertex shader ever uses viewport index.
This fixes:
piglit arb_viewport_array-render-viewport-2
KHR-GLES31.core.viewport_array.draw_to_single_layer_with_multiple_viewports,Fail
KHR-GLES31.core.viewport_array.draw_mulitple_viewports_with_single_invocation,Fail
KHR-GLES31.core.viewport_array.draw_multiple_layers,Fail
KHR-GLES31.core.viewport_array.depth_range,Fail
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5489>
This isn't fully free of bugs, but it's good to get CI working,
so fixing those bugs doesn't break anything.
The main buggy areas are missing indirect texture size,
and transform feedback geometry streams.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3778>
I'm not sure why this code was if (0), but if (1) for it fixes
dEQP-GLES31.functional.texture.border_clamp.range_clamp.nearest_float_color
This test expects +inf to get mapped to 255 and -inf to 0, both values
were ending up at 0.
v2: also enable in the SSE paths
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5379>
This hooks up the gallium API and adds the APIs needed
for shader stages to search and add things to the cache.
It also adds cache stats debug printing.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5049>
This is not always ->rgbBits, because there are cases where that could
be 32 but we're (legally) bound to a depth-24 pixmap. The important
thing to have match here is the actual server-side notion of depth. You
can look this up (at modest expense) from the xlib visual info if the
fbconfig has a visual. But it might not, so if not, fetch it (at
slightly greater expense) from XGetGeometry. Do this at GLX drawable
creation so you don't have to do it on the SwapBuffers path.
Apparently this fixes glx/glx-swap-singlebuffer, which is unintentional
but quite pleasant.
Fixes: mesa/mesa#2291
Fixes: 90d58286 ("drisw: Fix and simplify drawable setup")
Reviewed-by: Eric Anholt <eric@anholt.net>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3305>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3305>
This requires to bump LLVM to 8 because it's the minimum supported
version by RADV.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
If the runner has a HW device that would be supported, even without
/dev/dri forwarded into the container, it will be enumerated and the tests
on llvmpipe fail with (for example):
libEGL warning: Not allowed to force software rendering when API explicitly selects a hardware device.
libEGL warning: MESA-LOADER: failed to open i965 (search paths /builds/anholt/mesa/install/lib/dri)
Given that we can't necessarily control the DRI devices present on the
runners (particularly for developers bringing their own runners to reduce
the demands on fd.o's shared resources), just skip these tests in CI.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Commit also updates the Piglit quick_gl.txt, list modifications happened
due to following Piglit commits: c248bf201,c acff58ca, 5603e2e60.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Since we're not reporting test results as JUnit anymore, we can use the
default JSON format.
This affects how test results are summarized, update the reference files
accordingly.
Reviewed-by: Eric Anholt <eric@anholt.net>
This fails a couple of piglits due to other bugs in llvmpipe,
but it adds support for the feature properly.
v2: don't reset pipestats, just recalc, fix CI expectation
Always enabled; this doesn't require any driver work, it's just
core mesa bits.
quick_gl.txt is also updated because previously piglit ext_dsa
tests were skipped.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
One job for the quick_gl profile, one for the glslparser & quick_shader
profiles (doing these together takes hardly any more time than
quick_shader alone).
v2:
* Don't break lava tests
v3:
* Remove piglit test artifacts paths:
* Exclude some quick_shader tests again:
- Test whose result flips between pass/fail/skip
- *@vs_in tests, as not the same one of these gets picked every time
v4:
* Do not list passing tests in .gitlab-ci/piglit/*.txt (Eric Anholt)
* Include the test number summary in .gitlab-ci/piglit/*.txt
* Completely disable generating any vs_in tests in the piglit build.
* Remove some more unneded files from the piglit build tree.
* Exclude quick_gl arb_gpu_shader5 tests; they were all skipped anyway,
as llvmpipe doesn't support this extension yet, but occasionally they
would spuriously fail instead.
v5:
* Set LD_LIBRARY_PATH, so we actually test the Mesa build from the
pipeline...
* Verify that wflinfo reports the expected Mesa version
* Pass -noreset to Xvfb
v6:
* Don't use autoscale runners, run piglit with -j4 (Eric Anholt)
Reviewed-by: Eric Anholt <eric@anholt.net>