We support this extension on Zink even if we don't support ES 3.2,
because the compatibility extension doesn't require advanced blending.
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10861>
Since 70813c1c13 ("meson: Remove kmsro from gallium-drivers"), it is no
longer necessary to include kmsro in the gallium-drivers list; kmsro
will be automatically enabled if it may be required. Simplify the docs
for lima and panfrost accordingly to reflect the change.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10727>
This GLES extension allows to combine the formats BGR and BGRA
as host-side formatsto be combined with the internal formats
RGB8/SRGB8 and RGBA8/SRGB8_ALPHA8 respectively.
This extension is of interest to support a subset of OpenGL in
virtualized environments where the host only supports GLES.
Initial mesa/glformat.c patch: rohan.garg@collabora.com
v2: - Correct names for ClearTexture calls
- Add BGR(A)_EXT tokens
- Add format check for BGR_EXT
(All Adam Jackson)
v3: Fix ordering in extension table (Marge)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com> (v2)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10613>
Add documentation for Perfetto and Gfx-pps, together with some perfetto
config files to use as a starting point.
Signed-off-by: Antonio Caggiano <antonio.caggiano@collabora.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: John Bates <jbates@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9652>
This only implements dynamic primitive restart enable, depth bias
enable and rasterizer discard enable. I leave logic op and patch
control points for later.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10340>
It seems building the doxygen docs has bit-rotted over time, and now
generates a set of empty modules, apart from some basic descriptions.
Since Mesa is mostly implementing externally documented APIs, I don't
think it makes a whole lot of sense trying to fix this, and I think the
presence of these files might confuse users who try them out.
So let's just get rid of this.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10611>
The build-finished event is also triggered when there's an error. I
somehow got the second argument wrong, and ended up ignoring the case.
This can lead to new exceptions being thrown due to missing files, that
ends up hiding the real problem.
Fixes: 64a4ba9e1c ("docs: add an extension to generate redirects")
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10407>
We were implictly including it in exposing VK 1.2, but we weren't making
use of the supplied struct. Actually enabling it gives us a chance to do
slightly better at Z/S UBWC, and means we won't lose the separate usage
test coverage when switching back to exposing VK 1.1.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10594>
Otherwise, these will end up in the same definition-list, which isn't
very clear, and different to what we do elsewhere in this file.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10453>
It's already implemented and it works quite fine on GFX10+, so it
should be safe to enable it on GFX8-9.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10488>
I mixed up the EXT and ARB version of the extensions; we actually do
require shaderStorageImageWriteWithoutFormat as well here.
Thanks to Ilia Mirkin for pointing this out.
It also seems I got really confused about what was required when writing
the docs, so let's fix that as well.
Fixes: 341332b23a ("zink: correct image cap checks")
Fixes: ecac7f3da1 ("docs: add missing zink-requirement")
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10463>
It seems nobody is interested in maintaining this info, and nobody seems
to complain. We already have more or less the same information in our
release-notes, so let's just redirect users there instead.
Users interested in archeology can look through the git history for the
information that's missing.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/4222
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10451>
A typo in the section about choice of language is a bit funny, but
let's fix it anyway ;)
Thanks to Ilia Mirkin for pointing this out.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10464>
We haven't respected this variable for about 10 years, as the support
was removed in bc63b226bc ("xlib: remove a ton of old xlib driver
cruft").
So let's also remove the documentation.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10281>
This is used in the Mesa GLUT implementation, which has been separated
out into its own repo, and is largely abandoned in favour of FreeGLUT.
So let's not try to document MESA_PRIVATE_CMAP, as it's just going to
confuse users.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10281>
The support for color-indexed rendering was removed from mesa all the
way back in 2010, in commit 81fe9949ef ("mesa/xlib: Remove support for
color-index rendering").
So let's drop it from our documentation as well. This environment
variable does nothing.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10281>
This is a cleaned up and updated version of the readme page for Lima
that was until now being maintained separately.
Let's move it in-tree so it is maintained along with the pages for
other similar drivers.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Reviewed-by: Andreas Baierl <ichgeh@imkreisrum.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10406>
generally speaking, if I'm tracing an app, I want to see what's happening to
my driver, not what's happening to tc, as tc does rewriting of command streams
which can affect the operation of the driver
use GALLIUM_TRACE_TC for previous behavior
Acked-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10362>
The claim that we require vulkan memory model's MakeAvailable and
MakeVisible semantics for image writes isn't accurate. This would be
required *if* we were already using the Vulkan memory model.
But we're using the GLSL450 memory model in those cases, which has no
such requirements.
This means that any problems on RADV due to the lack of these semantics
are RADV bugs, and should be fixed in RADV instead.
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10345>
Without this extension, we misrender when custom border colors are
used. Let's document this, and emit a warning when the extension is
missing.
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10316>
OpTerminateInvocation provides the behavior required by the GLSL
discard statement, which we already implement.
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9460>
The prog_to_nir->NIR-to-TGSI change ended up causing regressions on r300,
and svga against r300-class hardware, because nir_lower_uniforms_to_ubo()
introduced shifts that nir_lower_ubo_vec4() tried to reverse, but that NIR
couldn't prove are no-ops (since shifting up and back down may drop bits),
and the hardware can't do the integer ops.
Instead, make it so that nir_lower_uniforms_to_ubo can generate
nir_intrinsic_load_ubo_vec4 directly for !INTEGER hardware.
Fixes: cf3fc79cd0 ("st/mesa: Replace mesa_to_tgsi() with prog_to_nir() and nir_to_tgsi().")
Closes: #4602
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10194>
this enables detection for the EXT vs the ARB extension, which have
different specifications regarding which formats must be supported
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10030>
VK_KHR_spirv_1_4 is trivial because vtn already supports all the added
SPIR-V features that aren't gated behind Vulkan extensions. I've
observed some robustness2 CTS tests requiring this. However there are
a few tests currently failing due to lacking spilling.
VK_EXT_scalar_block_layout should also be trivial, since support for
"straddling" UBO loads was added recently for other reasons. This is
used by every robustness2 CTS test.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8695>
Layered VRS attachments is for later.
The CTS failures are similar to the existing ones, I will investigate
soon.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10187>
We're currently using uint arrays instead of uvec4 arrays for UBOs and
SSBOs, which requires scalarBlockLayout. Fixing this is a lot of work,
so let's just document it for now.
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10127>
This allows to force the VRS rates via RADV_FORCE_VRS, the supported
values are 2x2, 1x2 and 2x1. This supports the primitive shading rate
mode for non GUI elements.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7794>
similar to amd/radv driver debug modes for sqtt, this specifies a filename
which is checked on every flush(PIPE_FLUSH_END_OF_FRAME); when it exists,
the next frame (and only that frame) is captured into the trace
to use, specify a file with the env var, run your app, and 'touch /path/to/file'
when you want to capture a trace
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10058>
It's not enabled by default because it requires performance testing.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9919>
Commits like the following changed the script names and distro tag
but didn't update the documentation. We do not explicitely mention
script names because they will likely change in the future but the
distro tag is less likely to change because it is shared with the
upstream ci-templates repo.
Fixes: af7dca3560 ("ci: Update the ci-templates commit.")
Fixes: 506e9d5fc7 ("gitlab-ci: Rename container install scripts to ...")
Fixes: c6c7652753 ("gitlab-ci: Organize images using new REPO_SUFFIX ...")
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9781>
The "-devel"-suffix is only helpful to RedHat users. Debian based
distros use "-dev" instead. But let's get out of the distro-specific
business, and instead just spell out "development", as this applies
regardless of naming-scheme.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9947>
We need a single empty line between the code-block state and the text
in the block, otherwise the rST is invalid and the entire block will be
dropped, as is currently the case on the website.
While we're at it, remove some needless colons from these code-blocks as
well. They're not needed, and we usually don't have these in the docs.
Fixes: a2a8c6a36c ("docs: Add some documentation of game GL buffer object mapping behavior.")
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9710>
While we should probably use this extension at some point, we don't
currently do. So let's remove it, so the code documents the status-quo
instead of some potential future direction.
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9925>
Zink does not require VK_KHR_get_physical_device_properties2; we have
fallback-code in place for when that is lacking.
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9925>
VkPhysicalDeviceFeatures::depthClamp isn't required until GL 3.2, where
we already list it. Remove the extra entry to avoid confusion.
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9925>
Loosely based on ANV implementation.
For executable's internal representation we output:
- Initial NIR after spirv_to_nir
- Final optimized NIR
- IR3 disassembly
Note, that vkGetPipelineExecutablePropertiesKHR is required to
return executable properties even if pipeline was not created with
CAPTURE_STATISTICS or CAPTURE_INTERNAL_REPRESENTATIONS bits set.
So the executables array is unconditionally populated, however
NIR and IR3 disassemlies are filled only when
CAPTURE_INTERNAL_REPRESENTATIONS is set.
Passes dEQP-VK.pipeline.executable_properties.*
Works with RenderDoc.
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8877>
We check for this feature in zink_is_format_supported, so VK drivers
need to expose it to get BC textures working. Let's document the
reality.
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9803>
To easily debug if enabling VRS for flat shading is broken.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9515>
When I initially started writing these lists, I expected the lists to be
much less uniform in what bits were required. Turns out I was wrong, and
this ended up really neat and orderly.
I'm sure we're missing some defacto requirements here and there,
especially for the early versions. This list is based on what we check
for in version.c, and it's better than nothing.
Suggested by Mike Blumenkrantz.
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9602>
Triple backticks doesn't mean anything in RST, so this becomes quoted
strings containing backticks. That's not what I meant here...
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9602>
This is to allow for
VK_EXT_sampler_filter_minmax
GL_EXT_texture_filter_minmax
support
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9487>
There are a variety of paths that apps take (this is by no means a
complete enumeration, I tried to keep going until I saw repeats but
eventually ran out of steam), and it should be useful to driver developers
writing their pipe_transfer_map() and invalidate_resource() calls to see a
bunch of the patterns without having to do performance debug on each app.
Acked-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9231>
Available since Vulkan 1.0, and in fact already wired up, just not
advertised. It looks like we could make this dynamic state but this
works for now.
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9371>
Enable pipe capability of exporting stencil from shader when Vulkan
extension is available.
Signed-off-by: Antonio Caggiano <antonio.caggiano@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9244>
This was mostly generated through scripts parsing glxinfo and then some
manual adjustments.
Note that lima is mostly a GLES 2.0 driver so its usefulness on this
list is a bit limited. But there was a long standing user request to
include it here and I guess it's better to be on the radar.
The extension list might not be fully correct, hopefully putting it here
for comparison also helps tracking if something is wrong or missing.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9031>
when this is not set, this triggers shader and sampler state updates any time a sampler
starts or stops using GL_CLAMP, applying bitmasks needed to run nir_lower_tex
and setting CLAMP_TO_BORDER/CLAMP_TO_EDGE as necessary to mimic the behavior
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8756>
We should be exposing it in every driver, since it's required eventually
to reduce jank. Make drivers have to explicitly opt out instead of opt
in.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9088>
Otherwise, Clang will error out when it doesn't link:
Compiler stderr:
clang: error: argument unused during compilation: '-fuse-ld=lld' [-Werror,-Wunused-command-line-argument]
When that happens when Meson is checking for the presence of macros in
sys/sysmacros.h, that file won't be included resulting in the following
errors:
ld.lld: error: undefined symbol: makedev
ld.lld: error: undefined symbol: major
ld.lld: error: undefined symbol: minor
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Acked-by: Eric Anholt <eric@anholt.net>
Gitlab: #4137
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8757>
We need a newline here to avoid syntax errors while builind the
sphinx-documentation.
The errors don't lead the build fail, so we didn't notice this on CI.
Which is a shame IMO. Instead, the blocks simply fail to render.
Fixes: 2e2edaa89b ("docs/ci: Document setting up the http cache for traces.")
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8839>
This was useful back at the dawn of time when apps weren't as
well developed and layers mostly sucked. I don't think it's been
used in a quite a while so remove it, as the new dispatch
layer doesn't support it.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8676>
We often do this:
pipe->set_constant_buffer(pipe, shader, slot, &cb);
pipe_resource_reference(&cb->buffer, NULL);
That results in atomic increment in set_constant_buffer followed by
atomic decrement after set_constant_buffer. This new interface
eliminates those atomics.
For the case above, this should be used instead:
pipe->set_constant_buffer(pipe, shader, slot, true, &cb);
cb->buffer = NULL; // if cb is not a local variable, else do nothing
AMD Zen benefits from this. The perf improvement is ~3% for Viewperf13/Catia.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8298>
Enabled the VK_EXT_sample_locations for Intel Gen >= 7.
v2: Replaced device.info->gen >= 7 with True, as Anv doesn't support
anything below Gen7. (Lionel Landwerlin)
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/1887>
The vulkan cond rendering hook is quite different than the
traditional gallium one so add a new interface for it.
This just conditionalises rendering on the memory location.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8182>
These requirements aren't all about VkPhysicalDeviceFeatures, so let's
make the text reflect that.
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Hoe Hao Cheng <haochengho12907@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8648>
If these features aren't supported, we'll start doing illegal stuff, so
let's document it.
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Hoe Hao Cheng <haochengho12907@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8648>
GL 4.1 and 4.2 is listed as done for Zink anyway, so we don't need to
single out these features as supported any longer.
Reviewed-by: Hoe Hao Cheng <haochengho12907@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8639>
Zink implements more features than currently maked off in features.txt,
so let's fill those bits in!
This is based on the output of glxinfo on ANV.
Reviewed-by: Hoe Hao Cheng <haochengho12907@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8639>
If we want syntax-highlighting to actually work here, we should make
sure the code actually parses.
This fixes a warning during docs build.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8243>
There's a few more cases that needs proper quoting for Sphinx. Asterisks
and ticks at the start of words, as well as underscores at the end of
symbols, even when they have trailing escaped characters.
We should really find a way to robustly escape these things when
generating them.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8243>
This indicates whether a driver wants samplers for buffer textures as
well as normal textures.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8300>
This can be used to work around a common class of bugs appearing as
flickering.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Cc: mesa-stable
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8104>
Restructured text (and markdown) is painful to programatically
manipulate, most python parsers are geared towards writing markdown and
generating html. I'd like to move the calendar updates to being
scripted, as such using csv to store them will be convenient. This also
allows us to simplify our scripting that manipulates the table
considerably.
Acked-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8341>
Drivers aren't allowed to ignore start with user index buffers anymore.
This is required by the new fast path where mesa/main is using pipe_draw_info.
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7679>
To remove PIPE_CAP checking in the common code.
It's better if drivers lower multi draws even if the hardware doesn't
support it beause the multi draw loop can be moved deeper into the driver
to remove more overhead.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7679>
Erik Faye-Lund
Ryan Houdek
Hyunjun Ko
Alyssa Rosenzweig
Rob Clark
Gert Wollny
Antonio Caggiano
Samuel Pitoiset
Danylo Piliaiev
Jordan Justen
Eric Anholt
Mike Blumenkrantz
Dylan Baker
Rohan Garg
Erico Nunes
Michel Zou
Alyssa Rosenzweig
Eric Engestrom
Connor Abbott
Marek Olšák
Dave Airlie
Joshua Ashton
Adrian Ratiu
Matt Turner
Jose Fonseca
Rhys Perry
Adam Jackson
Ilia Mirkin
Bas Nieuwenhuizen
Pierre Moreau
Jesse Natalie
Christian Gmeiner
Alyssa Rosenzweig
Hoe Hao Cheng
Tomeu Vizoso
Caio Marcelo de Oliveira Filho
Eleni Maria Stea
Italo Nicola
Erik Faye-Lund
Daniel Schürmann
Icecream95