This is a common enough operation that it's nice to not have to think about
the arguments to foreach_list_typed every time.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We may want to use different type_size functions for (e.g.) inputs
vs. uniforms. Passing in -1 for mode ignores this, handling all
modes as before.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Some hardware (such as Broadwell) can run geometry shaders more
efficiently when the number of vertices emitted is statically known.
This pass provides a way to obtain the constant vertex count, or
-1 indicating that the vertex count is unknown/non-constant.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This patch also introduces a lowering pass to convert the simple GS
intrinsics to the new ones. See the comments above that for the
rationale behind the new intrinsics.
This should be useful for i965; it's a generic enough mechanism that I
could see other drivers potentially using it as well, so I don't feel
too bad about putting it in the generic code.
v2:
- Use nir_after_block_before_jump for the cursor (caught by Jason
Ekstrand - I'd mistakenly used nir_after_block when rebasing this
code onto the new NIR control flow API).
- Remove the old emit_vertex intrinsic at the end, rather than in
the middle (requested by Jason).
- Use state->... directly rather than locals (requested by Jason).
- Report progress from nir_lower_gs_intrinsics() (requested by me).
- Remove "Authors:" section from file comment (requested by
Michael Schellenberger Costa).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Some hardware needs to clamp texture coordinates to [0.0, 1.0] in the
shader to emulate GL_CLAMP. This is added to lower_tex_proj since, in
the case of projected coords, the clamping needs to happen *after*
projection.
v2: comments/suggestions from Ilia and Eric, use txs to get texture size
and clamp RECT textures to their dimensions rather than [0.0, 1.0] to
avoid having to lower RECT textures to 2D.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
v2: comments/suggestions from Ilia and Eric, split out get_texture_size()
helper so we can use it in the next commit for clamping RECT textures.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Some hardware, such as adreno a3xx, supports txp on some but not all
sampler types. In this case we want more fine grained control over
which texture projectors get lowered.
v2: split out nir_lower_tex_options struct to make it easier to
add the additional parameters coming in the following patches
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Since the following patches will add additional tex-lowering related
functionality, which doesn't make sense to split out into a separate
pass (as they would require duplication of the projector lowering
logic), let's give this pass a more generic name.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The vertex shader lowering adds calculation for CLIPDIST, if needed
(ie. user-clip-planes), and the frag shader lowering adds conditional
kills based on CLIPDIST value (which should be treated as a normal
interpolated varying by the driver).
Note that this won't quite do the right thing in the face of MSAA plus
user-clip-planes, since all the samples would be killed or not (rather
than potentially only a portion of them). But it's better than no UCP
support at all for drivers that don't have this in hw.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
This will allow us to access the uniform later on without resorting to
building a name string and looking it up in UniformHash.
V3: remove line wrap change from this patch
V2: store slot number for all non-UBO uniforms to make code more
consitent, renamed explicit_binding to explicit_location and added
comment about what it does. Store the location at every shader stage.
Updated data.location comments in ir/nir.h.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Fortunately, nir_constant_expr already auto-splats if "dst" never shows up
in the constant expression field so we don't need to do anything there.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Eduardo Lima Mitev <elima@igalia.com>
As of a10d4937, we would really like things associated with an instruction
to be allocated out of that instruction and not out of the shader. In
particular, you should be passing the instruction that will ultimately be
holding the source into nir_src_copy rather than an arbitrary memory
context.
We also change the prototypes of nir_dest_copy and nir_alu_src/dest_copy to
explicitly take an instruction so we catch this earlier in the future.
Cc: "11.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Thomas Helland <thomashelland90@gmail.com>
This makes it possible for NIR shaders to know the number of output
vertices and the number of invocations. Drivers could also access
these directly without going through gl_program.
We should probably add InputType and OutputType here too, but currently
those are stored as GL_* enums, and I wanted to avoid using those in
NIR, as I suspect Vulkan/SPIR-V will use different enums. (We should
probably make our own.)
We could add VerticesIn, but it's easily computable from the input
topology, so I'm not sure whether it's worth it. It's also currently
not stored in gl_shader (only gl_shader_program), which would require
changes to the glsl_to_nir interface or require us to store it there.
This is a bit of duplication of data...ideally, we would factor these
substructs out of gl_program, gl_shader_program, and nir_shader, creating
a gl_geometry_info class...but it would need to go in a new place (in
src/glsl?) that isn't mtypes.h nor nir.h.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
This pass can be used as a helper for NIR producers so they don't have to
worry about creating the temporaries themselves.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
We were already doing this internally for iterating over a function
implementation, so just expose it directly.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
v2: use nir_cf_node_remove_after() instead of our own broken thing.
v3: use the new control flow modification helpers.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This patch implements a general nir_instr_insert() function that takes a
nir_cursor for the insertion point. It then reworks the existing API to
simply be a wrapper around that for compatibility.
This largely involves moving the existing code into a new function.
Suggested by Connor Abbott.
v2: Make the legacy functions static inline in nir.h (requested by
Connor Abbott).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Acked-by: Connor Abbott <cwabbott0@gmail.com>
We want to use this for normal instruction insertion too, not just
control flow. Generally these functions are going to be extremely
useful when working with NIR, so I want them to be widely available
without having to include a separate file.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Acked-by: Connor Abbott <cwabbott0@gmail.com>
This makes it easy for NIR passes to inspect what kind of shader they're
operating on.
Thanks to Michel Dänzer for helping me figure out where TGSI stores the
shader stage information.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Previously, there were four type_size() functions in play - the i965
compiler backend defined scalar and vec4 type_size() functions, and
nir_lower_io contained its own similar functions.
In fact, the i965 driver used nir_lower_io() and then looped over the
components using its own type_size - meaning both were in play. The
two are /basically/ the same, but not exactly in obscure cases like
subroutines and images.
This patch removes nir_lower_io's functions, and instead makes the
driver supply a function pointer. This gives the driver ultimate
flexibility in deciding how it wants to count things, reduces code
duplication, and improves consistency.
v2 (Jason Ekstrand):
- One side-effect of passing in a function pointer is that nir_lower_io is
now aware of and properly allocates space for image uniforms, allowing
us to drop hacks in the backend
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
v2 Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We want to start reworking and expanding this code, but it'll be a lot
easier to do once we disentangle it from the rest of the stuff in nir.c.
Unfortunately, there are a few unavoidable dependencies in nir.c on
methods we'd rather not expose publicly, since if not used in very
specific situations they can cause Bad Things (tm) to happen. Namely, we
need to do some magical control flow munging when adding/removing jumps.
In the future, we may disallow adding/removing jumps in
nir_instr_insert_*() and nir_instr_remove(), and use separate functions
that are part of the control flow modification code, but for now we
expose them and put them in a separate, private header.
Signed-off-by: Connor Abbott <connor.w.abbott@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
It's simply the first nir_cf_node in the nir_function_impl::body list,
which is easy enough to access - we don't to store a pointer to it
explicitly. Removing it means we don't need to maintain the pointer
when, say, splitting the start block when modifying control flow.
Thanks to Connor Abbott for suggesting this.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
We may find a cause to do more undef optimization in the future, but for
now this fixes up things after if flattening. vc4 was handling this
internally most of the time, but a GLB2.7 shader that did a conditional
discard and assign gl_FragColor in the else was still emitting some extra
code.
total instructions in shared programs: 100809 -> 100795 (-0.01%)
instructions in affected programs: 37 -> 23 (-37.84%)
v2: Use nir_instr_rewrite_src() to update def/use on src[0] (by Thomas
Helland).
v3: Make sure to flag metadata dirties, and copy the swizzle and abs/neg
over to src[0], too (by anholt).
Reviewed-by: Thomas Helland <thomashelland90@gmail.com> (v2)
Tested-by: Thomas Helland <thomashelland90@gmail.com> (v2)
This is useful to increase the CSE opportunities for a scalar backend. It
avoids regressions when dropping vc4's custom CSE implementation.
v2: Cleanups by Matt (decl in the for loop, and unreachable()).
Reviewed-by: Matt Turner <mattst88@gmail.com>
Kenneth Graunke
Jason Ekstrand
Jason Ekstrand
Rob Clark
Timothy Arceri
Ilia Mirkin
Connor Abbott
Eric Anholt