These bring a whole lot of new coverage to these drivers, since dEQP is
bad at desktop GL feature coverage around early GL 3.x. piglit also gets
at a lot of MSAA, fast clearing, and texture layout issues that dEQP
doesn't do much with.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7370>
I've set it up in the gitlab-runer config on all the freedreno boards.
This means that for piglit, where the run.sh always choose either this
variable or 4 threads otherwise, we'll have the right number of parallel
tasks.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7370>
The .baremetal_test sets DEQP_PARALLEL: 0 (number of CPUs), so existing
DEQP tasks should already be auto-configured. This means we can drop
a530's single-threaded overrides, since it's non-SMP.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7370>
ARM64 had it for traces only, upgrade it to a full build so we can test
a630. We also add it for armhf, as we'll want it on both rpi and etnaviv.
Bumped the LAVA tag as well, since the script changes a bit and it does
impact the final image (even if we aren't pulling in full piglit there
yet). Note I also had to drop the "v" on the tarring of their rootfs, as
the verbosity on baremetal was exceeding job log size.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7370>
We have been advertising 3.1, which waffle has issues creating contexts
for, causing coverage (and performance!) issues in piglit. We should
support all the necessary features already.
Some new failures are caught by the 3.2 CTS, but they look like they're
existing issues simply not covered by the minimal GL 3.0 CTS.
Fixes: #3037
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8255>
It's been regressed a couple of times recently, so let's try to make sure
it doesn't happen again. The setup here is mostly like llvmpipe-quick-gl,
but using quick_gl+quick_shader together, and a few more spectacularly
long-running tests dropped. I also excluded a bunch of unsupported
extensions, to minimize the size of the skip list checked into the tree
(it's still 200k, though).
The unfortunate exclusions in here are fp64 and int64 -- most of the
piglit tests for them don't run because softpipe is still GL3.3, and it's
an egregious number of skips to add to the checked in list.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8068>
I moved QPA-to-XML conversion to the runner, so Mesa CI (and developers!)
don't need to do quite so much in bash. I also made it clean up caselist
.qpa files since nobody ever wants them and we deleted them anyway. This
cleans up a ton of the job log output.
Additionally, I added a subcommend to turn the .csv into a junit output
that we can expose to gitlab. Now, the pipeline's status page will report
the failed testcases, and the "detail" button will give you a link to the
.XML to view for the failure. (We don't report all testcases because it's
too much load for the gitlab server). Note that this will 404 for the
LAVA runners for now, as they don't retain artifacts in gitlab (the plan
is to eventually have them minio upload the artifacts).
This uprev also includes a deqp output parsing fix, resulting in us
catching a couple more failures in some drivers.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8206>
v2:
- Squashed the commit to remove tracie jobs (Eric).
v3:
- Rename *-piglit-traces jobs with *-traces (Eric).
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6388>
v2:
- Rename the ".arm64-deqp-test-vk" template as
".arm64-deqp-test-freedreno-vk" (Eric).
v3:
- Rename the ".arm64-test" template as ".freedreno-test" (Eric).
- Rename the ".arm64-deqp-test" template as
".baremetal-deqp-test" (Eric).
- Rename the ".arm64-deqp-test-freedreno-vk" template as
".baremetal-deqp-test-freedreno-vk".
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6388>
The STRIP_CMD env var is used in several build scripts, not just by
dEQP.
Also, we want to have the rootfs destination directory created so it
also exists for builds that only move directory trees in there.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6388>
Along the way, modify the piglit run script and refactor the way
piglit jobs are generated.
v2:
- Squashed the commit to remove tracie jobs (Eric).
v3:
- Extend information in the comments about the need to use a
running X server for replaying with Vulkan (Tomeu).
- Do actually fail if the upload doesn't work (Tomeu).
v4:
- Rename *-piglit-traces jobs with *-traces.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> [v3]
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6388>
We also need that summary's aggregate command can use JUnit as backend,
a cross-compilation fix for its CMakeList.txt, a fix for the JUnit
backend and a small change in replayer's compare output.
v2:
- Updated the piglit commit so it features another couple of needed
fixes.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com> [v1]
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6388>
v2:
- Update tag for the android_build image (Michel).
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com> [v1]
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6388>
The -S and -B flags were officially introduced in CMake 3.13.
Avoids the following warning:
"
CMake Warning:
No source or binary directory provided. Both will be assumed to be the
same as the current working directory, but note that this warning will
become a fatal error in future CMake releases.
"
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6388>
When introducing/removing these files, it's easy to forget to update the
yml to point to them. Instead of requiring the separate update, just have
the runner script pick the right one from a single per-gpu variable.
As a result, we now pick up the new deqp-lvp-skips.txt that was added but
not conected. This also required moving some bypass flakes from the
shared a630 flakes list to a separate list, which is a feature because now
we'd notice the introduction of flakes to the gmem path.
Fixes: ab79e6b8e3 ("ci: skip failing test on lavapipe")
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8147>
For "0" (its default) deqp-runner picks a number of jobs corresponding to
the CPU count, so set our hardware runners to use that (note that mesa's
deqp-runner.sh will pick a default of 4 if we don't specify a
DEQP_PARALLEL).
This means we'll allocate threads for the slow cores on a630 now, reducing
gles3 runtime from 6.5 minutes to around 5.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8132>
They've been doing so since the webdav results upload was added. This
means that we'll get normal truncated failures lists with the pointer to
the job artifacts, rather than filling a log file if you broke everything.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8132>
I want to enable ASan runs on freedreno. It turns out it's a long road to
get there, starting with making sure we can run our unit tests with the
sanitizer enabled.
While I'm revving this container, add in valgrind too to make sure that
our build paths with valgrind enabled work.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7936>
Now that we've soaked the Windows build in and it's working well,
restrict it to only running on given pipelines, albeit in a somewhat
surprising way.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8053>
The classic OSMesa renders directly into user memory using
src/mesa/swrast, while gallium OSMesa renders using softpipe or llvmpipe
and copies out at glFlush() time. This would make gallium look like a
worse choice for OSMesa, except that swrast is:
1) Painfully slow to render compared to llvmpipe
2) Incorrect at derivatives
3) Limited to GL 2.1 instead of GL 4.6
In my survey of OSMesa users, debian was the remaining holdout with
classic OSMesa in use on hurd and some rare non-LLVM-supported
architectures (sh4, alpha, etc.). As of today, they've switched to
softpipe-based gallium OSMesa for them.
To prevent people from running the wrong OSMesa (to the extent that
running OSMesa can ever be the right thing), delete the classic
version.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Closes: #320Closes: #877Closes: #2297
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/1243>
As it will fail right away if there isn't, and that prevents the CI to
run on people's branches.
$ ci-fairy check-merge-request --require-allow-collaboration --junit-xml=check-merge-request.xml
ERROR: No open merge request against mesa/mesa with sha 9f6aba4be0ceb59d35732651cc44f676e93b70b5
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Fixes: d4151f2e ("ci: Run sanity job only in pre-merge pipelines")
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8032>
This should make more important jobs visible without scrolling on
pipeline pages.
The deploy stage jobs only depend on the sanity job or none at all, so
this has no impact on when the former can run.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7926>
It's more of a nuisance than useful for forked branches.
This means the test-docs job can no longer have a direct dependency on
sanity for forked branches, so split it up into two jobs: one for
pre-merge pipelines, one for forked branches.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7926>
Require libwayland 1.18 and remove the workaround for
WL_SHM_FORMAT_{A,X}BGR16161616F.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7771>
And use it in jobs for images using another Mesa image as their base.
Should fix the build of images which don't use another Mesa image as
their base (by no longer setting the FDO_BASE_IMAGE variable).
Fixes: 0781d9825b "ci: Append $MESA_TEMPLATES_COMMIT to image tags"
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7957>
This fixes the build of images which use another Mesa image as the base.
v2:
* Move $CI_REGISTRY_IMAGE expansion into FDO_BASE_IMAGE assignment as
well (Dave Airlie)
Fixes: 0781d9825b "ci: Append $MESA_TEMPLATES_COMMIT to image tags"
Reported-by: Dave Airlie <airlied@redhat.com>
Acked-by: Eric Anholt <eric@anholt.net> # v1
Reviewed-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7957>