Only one piglit test fails,
sso-vs-gs-fs-array-interleave
There are 3 tests using ssbo without checking sizes failing also
but those are test bugs.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This was already being reported, just missed the docs.
Reported-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just builds on the image support. Evergreen only has ssbo
for fragment and compute no other stages.
v2: handle images and ssbo in the same shader properly (Ilia)
v3: fix RESQ on buffers,
fix missing atom emit
fix first element offset
use R32 format
write separate buffer rat store path.
(from running deqp gles3.1 tests)
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is a copy of the a5xx logic. Fails a few tests, but basic
functionality is there.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Unfortunately Adreno A4xx hardware returns incorrect results with the
GATHER4 opcodes. As a result, we have to lower to 4 individual texture
calls (txl since we have to force lod to 0). We achieve this using
offsets, including on cube maps which normally never have offsets.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Just comparing glxinfo and features.txt, and it seems features.txt is
fairly out of date. The a5xx specific features (compute/images/atomics/
etc) are recent.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Drivers have supported KHR_no_error for a while. We'd been leaving it
marked as "in progress" because there's a zillion places that could get
slightly more optimized. But, Timothy and Samuel have already done
piles of work, and I think we have a solid implementation at this point.
Let's check it off the list.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
These extensions are good for Vulkan interop, so track them.
Signed-off-by: Jakob Bornecrantz <jakob.bornecrantz@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This extension is effectively a backport of GLES3's internalformat
handling to GLES 1/2. It guarantees that sized internalformats specified
for textures and renderbuffers have at least the specified size stored.
That's a pretty minimal requirement, so I think it can be dummy_true and
exposed as a standard in Mesa.
As a side effect, it also allows GL_RGB565 to be specified as a texture
format, not just as a renderbuffer. Mesa had previously been allowing 565
textures, which angered DEQP in the absence of this extension being
exposed.
v2: Allow 2101010rev with sized internalformats even on GLES3, citing the
extension spec. Extend extension checks for GLES2 contexts exposing
with texture_float, texture_half_float, and texture_rg.
v3: Fix ALPHA/LUMINANCE/LUMINANCE_ALPHA error checking (GLES3 CTS
failures)
v4: Mark GL_RGB10 non-color-renderable on ES, fix A/L/LA errors on GLES2
with float formats.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This uses all the existing code to calculate lod values for mip linear
filtering. Though we'll have to disable the simplifications (if we know some
parts of the lod calculation won't actually matter for filtering purposes due
to mip clamps etc.). For better or worse, we'll also disable lod calculation
hacks (mostly should make a difference for cube maps) always - the issue with
per-pixel lod being difficult is mostly because we then have different mipmaps
needed for the actual texel fetch, which isn't a problem with lodq.
We still use approximation for the log2 - for that reason I believe the float
part of the lod is only accurate to about 4-5 bits (and one bit less with 1d
textures actually) which is hopefully good enough (though d3d10 technically
requires 6 bits - could use quadratic interpolation instead of linear to get
8 bits or so).
Since lodq requires unclamped lod, we also have to move some sampler key
calculations to texture sampling code - even if we know we're going to access
mipmap 0 we still have to calculate lod and apply lod_bias for lodq.
Passes piglit ARB_texture_query_lod tests (after having fixed the test).
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
This was implemented since forever, but not enabled.
It passes all piglit tests except one, arb_pipeline_statistics_query-frag.
The reason is that the test (for drawing a 10x10 rect) expects between
100 and 150 pixel shader invocations. But since llvmpipe counts this with
4x4 granularity (and due to the rect being 2 tris) we end up with 224
invocations. I believe however what llvmpipe is doing violates neither the
spirit nor the letter of the spec (our fragment shader granularity really
is 4x4 pixels, albeit we will bail out early on 2x2 or 4x2 (the latter
if AVX is available) granularity), the spec allows to count additional
invocations due to implementation reasons.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Semantically identical to the EXT version (whose string is still valid
for GLES), so rename the bit but expose both extension strings.
(Suggested by Ilia Mirkin and Ian Romanick.)
v3: Fix the entrypoint alias in GL4x.xml (Ilia)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
The only difference from the EXT version is bumping the minmax to 16, so
just hit all the drivers at once.
v2: Fix driver names, add to 17.3 release notes (Ilia Mirkin)
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The driver supported this since way before the GL spec for it existed.
Just need to support both the per-stream and for all streams variants
(which are identical due to only supporting 1 stream).
Passes piglit arb_transform_feedback_overflow_query-basic.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
The driver was supposed to support this since way before the GL spec for it
existed, albeit it was apparently broken, so fix and enable it.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
ARB_polygon_offset_clamp and ARB_texture_filter_anisotropic look like
they'd be pretty trivial to wire up.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
The OpenGL extension KHR_no_error is exposed since commit
d42d150ad2 by Timothy Arceri. Therefore it
should be marked as "started" in the features.txt
Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This enables support on GM200+ for:
- GL_AMD_vertex_shader_layer
- GL_AMD_vertex_shader_layer_viewport_index
- GL_ARB_shader_viewport_layer_array
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
[lyude: add relnotes/TES cap]
Signed-off-by: Lyude <lyude@redhat.com>
[imirkin: move relnotes to right place, add features.txt]
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
v2 (Andreas Boll):
- Mark GL 4.1 as supported by i965/gen7+
- Mark GL_ARB_shader_precision as supported by i965/gen7+
- Update release notes
Reviewed-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
readInvocationARB() and readFirstInvocationARB() need SHFL.IDX
instruction which is introduced in Kepler.
Signed-off-by: Boyan Ding <boyan.j.ding@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Require LLVM 5.0 or later because LLVM 4.0 is easily fooled into
putting the lane select of llvm.amdgcn.readlane into a VGPR and then
fails to continue to compile.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>