Order-aware scan/reduce can trade-off LDS traffic for external atomics
memory traffic in producer/consumer compute shaders.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The following race condition could occur in the no-timeout case:
API thread Gallium thread Watchdog
---------- -------------- --------
dd_before_draw
u_threaded_context draw
dd_after_draw
add to dctx->records
signal watchdog
dump & destroy record
execute draw
dd_after_draw_async
use-after-free!
Alternatively, the same scenario would assert in a debug build when
destroying the record because record->driver_finished has not signaled.
Fix this and simplify the logic at the same time by
- handing the record pointers off to the watchdog thread *before* each
draw call and
- waiting on the driver_finished fence in the watchdog thread
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This fulfills a requirement for clients that want to utilize same
code path for images with external formats (VK_FORMAT_UNDEFINED) and
"regular" RGBA images where format is known. This is similar to how
OES_EGL_image_external works.
To support this, we allow color conversion samplers for non-YUV
formats but skip setting up conversion when format does not have
can_ycbcr flag set.
v2: add comment and bundle can_ycbcr to the existing break
condition (Lionel)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
If a conversion struct was passed, then initialize view using
format from the conversion structure.
v2: use vk_format directly from the anv_format struct
v3: added some assertions (Lionel)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
If external format is used, we store the external format identifier in
conversion to be used later when creating VkImageView.
v2: rebase to b43f955037 changes
v3: added assert, ignore components when creating external
format conversion (Lionel)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Since we don't know the exact format at creation time, some initialization
is done only when bound with memory in vkBindImageMemory.
v2: demand dedicated allocation in vkGetImageMemoryRequirements2 if
image has external format
v3: refactor prepare_ahw_image, support vkBindImageMemory2,
calculate stride correctly for rgb(x) surfaces, rename as
'resolve_ahw_image'
v4: rebase to b43f955037 changes
v5: add some assertions to verify input correctness (Lionel)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
v2: have separate memory properties for android, set usage
flags for buffers correctly
v3: code cleanup (Jason)
+ limit maxArrayLayers to 1 for AHardwareBuffer based images
v4: rebase to b43f955037 changes
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
v2: add support for non-image buffers (AHARDWAREBUFFER_FORMAT_BLOB)
v3: properly handle usage bits when creating from image
v4: refactor, code cleanup (Jason)
v5: rebase to b43f955037 changes,
initialize bo flags as ANV_BO_EXTERNAL (Lionel)
v6: add assert that anv_bo_cache_import succeeds, add comment
about multi-bo support to clarify current implementation (Lionel)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This makes it cleaner to introduce more cases where we import memory
from different types of external memory buffers.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Use the anv_format address in formats table as implementation-defined
external format identifier for now. When adding YUV format support this
might need to change.
v2: code cleanup (Jason)
v3: set anv_format address as identifier
v4: setup suggestedYcbcrModel and suggested[X|Y]ChromaOffset
as expected for HAL_PIXEL_FORMAT_NV12_Y_TILED_INTEL
v5: set linear tiling for GPU_DATA_BUFFER usage, add comment
about multi-bo support to clarify current implementation (Lionel)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
v2: handle R8G8B8X8 as R8G8B8_UNORM (Jason)
v3: add HAL_PIXEL_FORMAT_NV12_Y_TILED_INTEL, we make it define
for now to avoid direct dependency to minigbm headers
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This will be utilized later by GetAndroidHardwareBufferPropertiesANDROID.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This will make it possible for next patch to rip
anv_image_create_info out from make_surface function.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
The quotation marks around 1.0 cause it to be treated as a string
instead of a floating point value. The generator then treats it as an
arbitrary variable replacement, so any iand involving a ('ineg', ('b2i',
a)) matches.
v2: Remove misleading comment about sized literals (suggested by
Timothy). Add assertion that the name of a varible is entierly
alphabetic (suggested by Jason).
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Tested-by: Timothy Arceri <tarceri@itsqueeze.com> [v1]
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com> [v1]
Fixes: 6bcd2af086 ("nir/algebraic: Add some optimizations for D3D-style Booleans")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109075
Fixes: 6b4c7047d5 ("meson: build gallium nine state_tracker")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Tested on gen9.
v2: Rename lower_txd_3d_surafaces flag to lower_txd_3d (Jason Ekstrand)
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Note that we have an official GL extension number, pick the appropriate
section of the GLX spec to modify, and add changelog.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This has not even had an attempt at implementation. If you asked for
renderer 0 - which, the spec implies, should always work - then
dri2_convert_glx_attribs would fail, we'd silently fall back to creating
an indirect context, and xserver would also not recognize the attribute
and would throw BadValue at you.
The API would be difficult to use in any case, since there's no way to
enumerate how many renderers the screen has. I'd be tempted to add that
by defining:
glXQueryRendererIntegerMESA(dpy, screen,
/* renderer = */ -1,
0, &value);
to return the number of renderers, but a new entrypoint might be
cleaner. Still, better to not specify it at all than to lie about it.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
In one place we say, if GLES isn't supported then the profile version
will be 0.0. Then later we say, if the GLES profile extension isn't
supported then GLX_RENDERER_OPENGL_ES_PROFILE_VERSION_MESA is not
mentioned in the spec. A strict reading of the latter would mean that
GLX_RENDERER_OPENGL_ES_PROFILE_VERSION_MESA is not a recognized token,
and the query should instead return False.
The implementation does not check for the GLES profile extensions, and
the additional complexity doesn't seem worth it. Removing the
interaction text makes the spec match the implementation.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
emit_intrinsic_store_image() is always using 4 components when
collecting registers for the value. When image has less than
4 components (e.g, r32f, rg32i, etc) this results in extra mov
instructions.
This patch uses the actual number of components from the image format.
For example, in a shader like:
layout (r32f, binding=0) writeonly uniform imageBuffer u_image;
...
void main(void) {
...
imageStore (u_image, some_offset, vec4(1.0));
...
}
instruction count is reduced in at least 3 instructions (note image
format is r32f, 1 component only).
This obviously reduces register pressure as well.
v2: - Added support for image formats from NV_image_format extension
(Ilia Mirkin).
- Return 4 components by default instead of asserting. (Rob Clark).
v3: Added more missing formats (Ilia Mirkin).
v4: Added a debug message for unknown image formats (Rob Clark).
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Instead of going all the way back to the variable, just look at the
deref. The modes are guaranteed to be the same by nir_validate whenever
the variable can be found. This fixes clear_unused_for_modes for
derefs that don't have an accessible variable.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Instead of going all the way back to the variable, just look at the
deref. The modes are guaranteed to be the same by nir_validate whenever
the variable can be found. This fixes apply_barrier_for_modes for
derefs that don't have an accessible variable.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This is instead of looking all the way back to the variable which may
not exist for all derefs. This makes this code properly ignore casts
with modes other than the mode[s] we care about (where casts aren't
allowed).
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This is instead of looking all the way back to the variable which may
not exist for all derefs. This makes this code properly ignore casts
with modes other than the mode[s] we care about (where casts aren't
allowed).
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This is instead of looking all the way back to the variable which may
not exist for all derefs. This makes this code properly ignore casts
with modes other than the mode[s] we care about (where casts aren't
allowed).
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This is instead of looking all the way back to the variable which may
not exist for all derefs. This makes this code properly ignore casts
with modes other than the mode[s] we care about (where casts aren't
allowed).
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
If we can't find the variable from the deref, just assume it isn't
invariant and continue on. This can happen if, for instance, we're
writing to a deref that points into an SSBO.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
"There's no point in walking the program if we're never going to
actually lower anything."
Except we might lower compacted local arrays. In that case, modes will
be 0, but there is still lowering to be done.
This reverts commit 7f75cf2a94.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109081
Suggested-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: Clayton Craft <clayton.a.craft@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Nicolai Hähnle
Tapani Pälli
Ian Romanick
Vinson Lee
Sagar Ghuge
Christian Gmeiner
Adam Jackson
Eduardo Lima Mitev
Jason Ekstrand