Instead of a third-party repository which has proved unreliable at
times.
This pulls in glibc 2.30 from testing in the x86_build image, so we need
to update the x86_test-{gl,vk} images to match.
Acked-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4851>
We don't want LLVM 8 packages to be pulled in from testing though (it
would make installing llvm-8-dev for cross architectures a lot more
complicated), so explicitly select buster-backports for them (they were
already implicitly installed from there before, since they're not
available in buster proper).
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4851>
Notable changes:
* No longer generate a separate *-built-by-job-* image tag, instead
store the pipeline/job information as labels in the image.
* Clean up some package information files which were accidentally left
before, possibly resulting in slightly smaller images.
Acked-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4851>
We will eventually need to build our own LLVM on Windows in order to
build libclc and other bits which are required for the d3d12 build, as
well as to be able to test SPIR-V/OpenCL on llvmpipe.
Start doing this now, building into the base container, and exercise
this by building llvmpipe under Windows.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4946>
This job is really small and it shouldn't hurt to cover two more
generations. This will prevent breaking the world on GFX6-GFX7
because we don't regularly test these chips.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4873>
This lets us get coverage of corner cases of the driver that are tricky to
force a testcase to hit. We don't want to do a full run of the CTS with
each option because that's a lot of runner time, so stack a bunch of
fractional runs in one test job to amortize the test run setup overhead.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4621>
It's easy to get something wrong in the driver build or container or
something that results in falling back to swrast, and then your only clue
was runtime and how your failure cases suspiciously match a swrast
driver's.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4621>
We always want to see status updates happening in the logs, otherwise it
can like maybe your machine hung until the run actually completes.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4621>
We haven't had it enabled due tointermittent failures. Those failures
are, as far as I can tell, due to GPU faults from buffer overflows where a
failing test in a thread stomps an otherwise passing thread's buffers. By
running deqp single-threaded, we can get more consistent failures, at the
cost of needing to do a tiny subset of the tests to keep runtime down.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4685>
Additionally, purge the winehq-stable package and its dependencies to
avoid crashing when building for s390x.
v2:
- Remove winehq-stable and dependencies for s390x.
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2657
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Daniel Stone <daniels@collabora.com> [v1]
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4678>
Add virglrenderer to the container and use the vtest transport to test
the Gallium driver. On the "host", llvmpipe is used.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4433>
An update seems to have poisoned gitlab-runner, and it can no longer
resolve DNS even though the host system can.
Disable this until we can figure out what's going on.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4589>
Verify that the Mesa version used when running tracie tests is the
one that was built by CI, rather than any installed distro version.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3894>
Without this, the .test-manual jobs could end up as 'when: manual' when
the jobs they depend on were 'when: never', which was flagged as
invalid YAML, preventing the pipeline from being created.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4522>
MR pipelines not triggered by Marge Bot can still be triggered manually.
Motivation: The main & forked Mesa project CI pipelines combined are
currently generating over 1 TB of egress traffic per week. ~80% of this
is from pre-merge pipelines. Assuming this corresponds to 4 pre-merge
and one post-merge pipeline per MR on average, this change could
potentially eliminate up to ~60% of the overall traffic (by preventing
3 of the 4 pre-merge pipelines from running automatically).
(Of course, this could be subverted if all jobs of the other pipelines
were triggered manually anyway... In most cases, manually triggering
just a few jobs should suffice)
v2:
* $GITLAB_USER_NAME was the wrong variable, $GITLAB_USER_LOGIN should
do the trick.
Suggested-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4432>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4432>
Let them run automatically once all their dependencies have passed.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4432>
To avoid confusion with `paths:` elements.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4432>
Our shared runners are set up for concurrent jobs ~= CPUs / 4 (x86) or 8
(ARM). If you use more build processes than that, then jobs may be
fighting each other for shared system resources, possibly to the point of
failure (we've seen one of the runners OOM on some jobs before, though I'm
not sure if this was the cause).
To try to systematically prevent the problem, we make a ninja wrapper in
the containers that passes the -j flags, and set MAKEFLAGS in the
container builds. This doesn't cover make in non-container builds, but I
believe we don't have any of those.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3782>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3782>
This prunes out all targets except libgl-gdi, libgl-xlib, and svga, as
suggested by Marek Olšák.
libgl-xlib will be remove once I have had time to confirm no automated
tests we have rely upon it.
There are also a bunch of Makefile.sources which become orphaned as
result, that are not taken care of in this change.
v2: Prune remainders of swr support.
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4348>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4348>
The .fdo.container-ifnot-exists template has been replaced by
.fdo.container-build.
We need to include "debian/" in FDO_REPO_SUFFIX for now, we can drop it
for individual images when their tags are bumped if we want.
Miscellaneous other goodies this gets us:
* The templates now add some labels to images which may be useful for
garbage collecting unused tags in the future.
* The templates now copy the current tag from the main project
registry to the forked project's if it already exists in the latter
but points to a different image hash. This will avoid false failures
(or passes) due to using the wrong image.
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4286>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4286>
In preparation for having automated testing with DXGI traces.
v2:
- Updated DXVK version.
- Merged the new Wine container into the existing Vulkan
one (Michel).
v3:
- Updated commit log.
- Use a particular known-good apitrace version (Alexandros).
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4238>
The backports repository can be temporarily inconsistent between
architectures, which can break the docker image build.
Suggested-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4238>
Adds a native build of Mesa using Meson with the Visual Studio 2019
toolchain on a Windows host.
Though Docker is supported on Windows, Docker-in-Docker is not possible,
nor are podman and skopeo available. We handle this by creating the
container from a shell-executor Windows machine, which gives us a native
PowerShell that we can execute Docker from. This attempts to do the same
copy-from-upstream-or-create-if-not-exists optimisation as the
ci-templates do for our Linux builds, albeit open-coded in PowerShell.
The Mesa build itself is executed inside a container, using Meson and
Ninja.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Jose Fonseca <jfonseca@vmware.com>
Acked-by: Brian Paul <brianp@vmware.com>
Acked-by: Eric Engestrom <eric@engestrom.ch>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4304>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4304>
Currently, we store the kernel and ramdisk for each LAVA job in the
artifacts of the job that built them. Because artifacts are stored in
GCE and LAVA labs aren't, this causes a lot of egress with is expensive.
To avoid this, have runners download most of the data via the (cached)
container images once, and for each job upload the kernel and ramdisk to
a server outside GCE.
Right now we only have Collabora's runner with a local web server, so
jobs that go to Baylibre's lab have been disabled.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4295>
There's some files from the .gitlab-ci directory that are needed in the
test stage and that, because the Mesa repository isn't checked out in
that stage, need to be made available through other means.
Because those files are going to be needed in LAVA devices, place them
ino the tarball containing the built files so it's available to both
gitlab-ci runners and LAVA devices.
Before those files were passed in the artifacts of the Gitlab CI job,
but this commit places them into the built tarball so scripts later in
the pipeline don't need to account for this discrepancy.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4295>
After 90a39af5f6 ("ci: Drop the git dependency in tracie"), we have
this error in the radv-polaris10-traces job:
"
...
+ /builds/tanty/mesa/artifacts/tracie/tests/test.sh
tracie_succeeds_if_all_images_match: Fail
Traceback (most recent call last):
File "/tmp/tracie.test.glY0O23HJo/tracie.py", line 6, in <module>
import requests
ModuleNotFoundError: No module named 'requests'
...
"
v2:
- Updated commit log to be more descriptive (Michel).
Fixes: 90a39af5f6 ("ci: Drop the git dependency in tracie")
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4237>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4237>
I think we want to cover these 3 generations at the barely minimum.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4082>
Following on from the db410c conversion to baremetal testing, reuse the
same scripts in the same rack to run 7 db820c boards (#4/8 is failing in
the bootloader for unknown reasons).
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4177>
The motivation is to allow llvmpipe to be enabled instead in the
meson-i386 job.
v2: (Eric Engestrom)
* Rename meson-main job to meson-gallium
* Remove stale comment above meson-i386 job
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4166>