Embed the xml files into the binary, so aubinator can be used from any
location.
v2: Split generation packing into another patch (Jason)
Check for xxd (Jason)
v3: Fix out of tree builds (Jason)
Generate custom variable name rather than names generated by xxd
(Lionel)
v4: Move generated _xml.h files to genxml/ (Sirisha)
v5: Remove newline from makefile (Jason)
v6: Add comment on gen*_xml.h creation (Jason)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This squashes all the radv development up until now into
one for merging.
History can be found:
https://github.com/airlied/mesa/tree/semi-interesting
This requires llvm 3.9 and is in no way considered
a conformant vulkan implementation. It can run a number
of vulkan applications, and supports all GPUs using
the amdgpu kernel driver.
Thanks to Intel for providing anv and spirv->nir,
and Emil Velikov for reviewing build integration.
Parts of this are:
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Authors: Bas Nieuwenhuizen and Dave Airlie
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fixes a problem where GL headers would only get installed if
glx was enabled. So if osmesa was enabled but not glx, then the
GL headers required by osmesa would be missing from the install.
v2: Dropped unneeded mesa_glinterop.h redundant osmesa.h install
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Chuck Atkins <chuck.atkins@kitware.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This is motivated by the fact that p_atomic_read and p_atomic_set may
somewhat surprisingly not do the right thing in the old version: while
stores and loads are de facto atomic at least on x86, the compiler may
apply re-ordering and speculation quite liberally. Basically, the old
version uses the "relaxed" memory ordering.
The new ordering always uses acquire/release ordering. This is the
strongest possible memory ordering that doesn't require additional
fence instructions on x86. (And the only stronger ordering is
"sequentially consistent", which is usually more than you need anyway.)
I would feel more comfortable if p_atomic_set/read in the old
implementation were at least using volatile loads and stores, but I
don't see a way to get there without typeof (which we cannot use here
since the code is compiled with -std=c99).
Eventually, we should really just move to something that is based on
the atomics in C11 / C++11.
Acked-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
V8: Feedback based on peer review
convert if block into a switch
Constify some func args
V7: Increase precision when measuring lmsensors volts
Flatten patch series.
V6: Feedback based on peer review
Simplify sensor initialization (arg passing).
Constify some func args
V5: Feedback based on peer review
Convert sprintf to snprintf
Convert char * to const char *
int arg converted to bool
Func changes to take a filename vs a larger struct.
Omit the space between '*' and the param name.
V4: Merged with master as of 2016/9/27 6pm
V3: Flatten the entire patchset ready for the ML
V2: Additional seperate patches based on feedback
a) configure.ac: Add a comment related to libsensors
b) HUD: Disable Block/NIC I/O stats by default.
Implement configuration option --enable-gallium-extra-hud=yes
and enable both statistics when this option is enabled.
c) Configure.ac: Minor cleanup to user visible configuration settings
d) Configure.ac: HUD stats - build system improvements
Move the -lsensors out of a deeper Makefile, bring it into the configure.ac.
Also, rename a compiler directive to more closely follow the standard.
V1: Initial release to the ML
Three new features:
1. Disk/block I/O device read/write stats MB/ps.
2. Network Interface RX/TX transfer statistics as a percentage
of the overall NIC speed.
3. lmsensor power, voltage and temperature sensors.
The lmsensor changes makes a dependency on libsensors so support
for the change is opt out by default.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
This code provides for an on-disk cache of objects. Objects are stored
and retrieved via names that are arbitrary 20-byte sequences,
(intended to be SHA-1 hashes of something identifying for the
content). The directory used for the cache can be specified by means
of environment variables in the following priority order:
$MESA_GLSL_CACHE_DIR
$XDG_CACHE_HOME/mesa
<user-home-directory>/.cache/mesa
By default the cache will be limited to a maximum size of 1GB. The
environment variable:
$MESA_GLSL_CACHE_MAX_SIZE
can be set (at the time of GL context creation) to choose some other
size. This variable is a number that can optionally be followed by
'K', 'M', or 'G' to select a size in kilobytes, megabytes, or
gigabytes. By default, an unadorned value will be interpreted as
gigabytes.
The cache will be entirely disabled at runtime if the variable
MESA_GLSL_CACHE_DISABLE is set at the time of GL context creation.
Many thanks to Kristian Høgsberg <krh@bitplanet.net> for the initial
implementation of code that led to this patch. In particular, the idea
of using an mmapped file, (indexed by a portion of the SHA-1), for the
efficent implementation of cache_has_key was entirely his
idea. Kristian also provided some very helpful advice in discussions
regarding various race conditions to be avoided in this code.
Signed-off-by: Timothy Arceri <timothy.arceri@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Needed to successfully link llvmpipe or swr when using shared llvm libs
built with inteljitevents enabled.
v2: Make adding inteljitevents component global rather than just
llvmpipe/swr, since libgallium will have a symbol dependency.
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Structurally, this is very similar to the existing Apple-DRI code, except I
have chosen to implement this using the __GLXDRIdisplay, etc. vtables (as
suggested originally in [1]), rather than a maze of ifdefs. This also means
that LIBGL_ALWAYS_SOFTWARE and LIBGL_ALWAYS_INDIRECT work as expected.
[1] https://lists.freedesktop.org/archives/mesa-dev/2010-May/000756.html
This adds:
* the Windows-DRI extension protocol headers and the windowsdriproto.pc
file, for use in building the Windows-DRI extension for the X server
* a Windows-DRI extension helper client library
* a Windows-specific DRI implementation for GLX clients
The server is queried for Windows-DRI extension support on the screen before
using it (to detect the case where WGL is disabled or can't be activated).
The server is queried for fbconfigID to pixelformatindex mapping, which is
used to augment glx_config.
The server is queried for a native handle for the drawable (which is of a
different type for windows, pixmaps and pbuffers), which is used to augment
__GLXDRIdrawable.
Various GLX extensions are enabled depending on if the equivalent WGL
extension is available.
The Wayland Scanner pkg-config file is called wayland-scanner.pc.
Fixes: 153539bd9d ("configure: rework wayland_scanner
handling (fix make distcheck)")
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Tested-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Brendan King <Brendan.King@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Step one to merging radv would be to move some files around.
This only adds the include path to r600/radeonsi, because later
we want to avoid having to add it to the generic target paths.
Acked-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This pulls isl and genxml into a single make file so that they can properly
build in parallel. This isn't terribly important now as genxml just
generates sources which happens serially first anyway but it will be more
important as we add more stuff to src/intel.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This option makes installed Vulkan ICD files contain only a driver library
name and not a path. This is intended for distros to help them work around
multi-arch issues.
Reviewed-by: Dave Airlie <airlied@redhat.com>
The Aubinator tool is designed to help the driver developers in debugging
the driver functionality by decoding the data in the .aub files.
Primary Authors of this tool are Damien Lespiau <damien.lespiau at intel.com>
and Kristian Høgsberg Kristensen <krh at bitplanet.net>.
v2: Review comments are incorporated by Sirisha Gandikota as below:
1) Make Makefile.am more crisp, reuse intel_aub.h from libdrm (per Emil)
2) Aubinator will use platform name instead of GEN number (per Matt)
3) Disassmebler gets created based on pciid rather then GEN number (per Matt)
4) Other formatting comments (per Ken, Matt and Emil)
Signed-off-by: Sirisha Gandikota <Sirisha.Gandikota@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Ben Widawsky <ben@bwidawsk.net>
Improves performance of OglBatch7 by 4.06851% +/- 1.17925% (n=169) on
Haswell, and cuts ~18k of .text:
text data bss dec hex filename
5824627 287816 29384 6141827 5db783 before/i965_dri.so
5806354 287816 29384 6123554 5d7022 after/i965_dri.so
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Jan Ziak (http://atom-symbol.net) <0xe2.0x9a.0x9b@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Not sure why I forgot to add them to CXXFLAGS in commit f55c408067 or
commit 875458b778. Cuts about 1k of .text.
text data bss dec hex filename
5806354 287816 29384 6123554 5d7022 i965_dri.so before
5805497 287744 29384 6122625 5d6c81 i965_dri.so after
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
According to the referenced bug report, gcc-4.5 and newer do not inline
memcmp(). I see no difference in performance of ipers with llvmpipe on a
Sandybridge (which does not have "Enhanced REP MOVSB/STOSB") by removing
this flag.
I attempted to confirm the problem with gcc-4.4, but it fails to compile
for quite a few different reasons.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The help string wasn't updated in cbc37f7.
Fixes: cbc37f7 ("anv: install the intel_icd.json to ${datarootdir} by
default")
Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: mesa-stable@lists.freedesktop.org
Commit 1f4869a2 unconditionally requires pthread-stubs. Unfortunately, the
cleverness that pthread-stubs is doesn't work with PE/COFF, and historically
Cygwin doesn't have a pthread-stubs.pc.
Don't require pthread-stubs on Cygwin.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Cygwin headers are now a bit more correct in handling feature test macros,
so use _GNU_SOURCE when building for Cygwin, as well.
(Notwithstanding f381c27c, we should probably have always been using
_GNU_SOURCE, since asprintf() is used by mesa in places)
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
Reviewed-by: Jon Turney <jon.turney@dronecode.org.uk>
As mentioned by the spec (and used by Archlinux and Debian) default to
${datarootdir} as opposed to ${sysconfdir} for the default location.
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Do not rely on the git sha1:
- its current truncated form makes it less unique
- it does not attribute for local (Vulkand or otherwise) changes
Use a timestamp produced at the time of build. It's perfectly unique,
unless someone explicitly thinkers with their system clock. Even then
chances of producing the exact same one are very small, if not zero.
v2: Remove .tmp rule. Its not needed since we want for the header to be
regenerated on each time we call make (Eric).
v3:
- Honour SOURCE_DATE_EPOCH, to make the build reproducible (Michel)
- Replace the generated header with a define, to prevent needless
builds on consecutive `make' and/or `make install' calls. (Dave)
v4:
- Keep the timestamp generation at make time. (Jason)
v5:
- Ensure that file is regenerated on incremental builds.
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Encapsulate the test for which flags are needed to get a compiler to
support certain features. Along with this, give various options to try
for AVX and AVX2 support. Ideally we want to use specific instruction
set feature flags, like -mavx2 for instance instead of -march=haswell,
but the flags required for certain compilers are different. This
allows, for AVX2 for instance, GCC to use -mavx2 -mfma -mbmi2 -mf16c
while the Intel compiler which doesn't support those flags can fall
back to using -march=core-avx2.
This addresses a bug where the Intel compiler will silently ignore the
AVX2 instruction feature flags and then potentially fail to build.
v2: Pass preprocessor-check argument as true-state instead of
false-state for clarity.
v3: Reduce AVX2 define test to just __AVX2__. Additional defines suchas
__FMA__, __BMI2__, and __F16C__ appear to be inconsistently defined
w.r.t thier availability.
v4: Fix C++11 flags being added globally and add more logic to
swr_require_cxx_feature_flags
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Tim Rowley <timothy.o.rowley@intel.com>
Tested-by: Tim Rowley <timothy.o.rowley@Intel.com>
Signed-off-by: Chuck Atkins <chuck.atkins@kitware.com>
Otherwise drivers such as SWR that depend on providing their own values
will fail to build.
v2: Add -mcpu for good measure (Chuck)
Cc: "11.2 12.0" <mesa-stable@lists.freedesktop.org>
Cc: Tim Rowley <timothy.o.rowley@intel.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Chuck Atkins <chuck.atkins@kitware.com>
Tested-by: Chuck Atkins <chuck.atkins@kitware.com>
Now there are not files that require python 3, so for now just remove
the python 3 dependency and use python 2. I think the right plan is to
just get all of the python ready for python 3, and then use whatever
python is available.
Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
cc: 12.0 <mesa-stable@lists.freedesktop.org>
Things have changed since commit a92910a ("glx: Refactor the configure
options for glx implementation choice (v3)") where only a single
configure option is used to control the GLX provider.
[Emil Velikov: Ensure that the check is moved after the detection code.]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
With reference to the libglvnd branch:
https://cgit.freedesktop.org/mesa/mesa/log/?h=libglvnd
This is a squashed commit containing all of Kyle's commits, all but two
of Emil's commits (to follow), and a small fixup from myself to mark the
rest of the glX* functions as _GLX_PUBLIC so they are not exported when
building for libglvnd. I (ajax) squashed them together both for ease of
review, and because most of the changes are un-useful intermediate
states representing the evolution of glvnd's internal API.
Co-author: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Add weak symbol notation for the pthread_mutexattr* symbols, thus making
the linker happy. When building with -O1 or greater the optimiser will
kick in and remove the said functions as they are dead/unreachable code.
Ideally we'll enable the optimisations locally, yet that does not seem
to work atm.
v2: Add the AX_GCC_FUNC_ATTRIBUTE([weak]) hunk in configure.
Cc: Alejandro Piñeiro <apinheiro@igalia.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Tested-by: Mark Janes <mark.a.janes@intel.com>
Add support for EGL android platform.
Also, detect when --host finishes with -android. In that case, we
do not set _GNU_SOURCE, and define autoconf symbol HAVE_ANDROID, so
that Android-specific workarounds can be applied.
Signed-off-by: Nicolas Boichat <drinkcat@google.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
[Emil Velikov: Rebase on top of HAVE_EGL_PLATFORM_NULL removal]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Add pthreadstubs to avoid pulling in full pthreads library. GBM will be the
first user.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This fixes a recent linking error in libvulkan_common
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Required functions into place for implementation, create screen
with device fd returned from X server, also bail out to DRI2
with certain conditions.
v2: -organize the error out path (Axel)
-squash previous patch 1 and 2 into one (Emil)
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Recent commit removed the winsys defines from anv_private.h thus
breaking the tests. To fix that and avoid it in the future, merge the
tests makefile in the libvulkan one.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Instead of cascading support for various different implementations of
GLX, all three options are now specified through the --enable-glx
option:
--enable-glx=dri : Enable the DRI-based GLX
--enable-glx=xlib : Enable the classic Xlib-based GLX
--enable-glx=gallium-xlib : Enable the gallium Xlib-based GLX
--enable-glx[=yes] : Defaults to dri if DRI is enabled, else
gallium-xlib if gallium is enabled, else
xlib
This removes the --enable-xlib-glx option and fixes a bug in which both
the classic xlib-glx and gallium xlib-glx implementations were getting
built causing different versioned and conflicting libGL libraries to be
installed.
v2: Changes from various review feedback from Emil:
a) Fixed typos
b) Corrected help docs for new option
c) Added appropriate a-b and r-b tags in commit msg
d) Fixed various GLX related dependency checks.
v3: Rebased to current master and added changelog in commit msg
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94086
Acked-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
src/intel/genxml/gen_pack_header.py requires python3.
v2: check for python3.5 as well
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
To avoid build issues, ensure that you're running `make' at the top level
and/or you've executed `make clean' beforehand.
Reviewed-by: Chad Versace <chad.versace@intel.com>
This adds a --with-vulkan-drivers option with one driver, "intel". In the
future, we may add more drivers to this list.
v2: Don't enable any drivers by default. This should prevent this patch
from breaking anyone's build.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
On the philosophy that a driver shouldn't change the compile flags
for the entire tree, take the clove approach of moving the c++11 flag
to the swr driver directory.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
We have several places where the Vulkan driver explicitly hooks into
valgrind when it's available. We need to be able to detect it.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Rather than having two almost identical Makefiles, with various VPATH
hacks just fold them, using COMMON_* variables and actually getting
things buildable/shipable.
v2: whitespace fixes, remove Makefile.sources-arch
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tim Rowley <timothy.o.rowley@intel.com>
... in order to determine if we need bison/flex. Failing to locate the
files will lead to mandating bison/flex even when building from a
release tarball.
CC: "11.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
It was useful for testing and as a prototype for radeonsi bringup,
but it's not used anymore and doesn't support OpenGL 3.3 even.
v2: try to fix OpenCL build
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Tested-by: Jan Vesely <jan.vesely@rutgers.edu>
Currently, configure script is forcing 'enable_asm' to be 'no'
whenever cross-compilation is performed on X86 host. This is
based on an assumption that target architecture is different
from host's (i.e. ARM). But there's always a case that we do
cross-compilation for target that is also X86 based just like
host in which same ASM codes will be supported. 'enable_asm'
should not be forced to be "no" anymore in this case.
v2: corrected commit message
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Only enable it when we compile the state tracker as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Tested on Linux (centos, ubuntu, and suse variants)
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Jose Fonseca <jfonseca@vmware.com>
This will be needed to support converting from cycle counts to time for
performance related queries (initially time-elapsed, but there are some
additional performance counters that could be wired up).
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Change the name of the .so to libvulkan_intel.so and add an installable
icd with the installed paths. Keep the icd file with build-tree paths,
but rename to dev_icd.json to make it clear that it's for development
purposes.
We no longer need to build any part of Mesa with Windows SDK 7.0.7600 or
MSVC 2008. MSVC 2013 will be the oldest we support.
In practice this means people are now free to declare variables in the
middle of blocks, on the whole Mesa tree.
Care should still be taken with variable length arrays and void pointer
arithmetic.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Hella-acked-by: Ian Romanick <ian.d.romanick@intel.com>
Currently it's an empty library, although it'll be used to store common
code between GLSL and NIR that is compiler specific (rather than generic
as the one in src/util).
XXX: strictly speaking we could add a python/mako parser to generate the
relevant files instead including builtin_type_macros.h in such a manner.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Matt Turner <mattst88@gmail.com>
Acked-by: Jose Fonseca <jfonseca@vmware.com>
The ISO C99 standard (7.18.4) specifies that C++
implementations should define UINT64_C only when
__STDC_CONSTANT_MACROS is defined.
Because we now use UINT64_C in our cpp files (since commit
208bfc493d), we need to add this define.
This also solves compilation errors with GCC 4.8.x on ppc64le machines.
v2: add this define to SCons build system
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
For profiling mesa's code, especially llvmpipe, PROFILE should be
defined. Currently, this define can only be generated if mesa is
built using scons.
This patch makes it possible to generate this define also when building
mesa through automake tools.
v2:
- Change --enable-llvmpipe-profile to --enable-profile
- Add -fno-omit-frame-pointer to CFLAGS and CXXFLAGS when enabling profile
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
To determine if we could use special POWER8 assembly directives, we first
need to detect whether we are running on POWER8 architecture. This patch
adds this detection to configure.ac and adds the necessary compilation
flags accordingly.
v2:
- Add option to disable POWER8 instructions generation
- Detect whether building on BE or LE machine and build with
-mpower8-vector only on LE machine
- Make the printed messages more standard
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
v2. forgot bump for non-gallium driver
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This patch modifies the SSE4.1 test in configure.ac to use a global
variable to initialize vector variables. In addition, we now return the
value of the computation instead of 0.
This is done so gcc 4.9 (and lower) won't optimize the SSE4.1 assembly
instructions (when using -O1 and higher), because then the configure test
might incorrectly pass even though the assembler doesn't support the
SSE4.1 instructions (the test will pass because the compiler does support the intrinsics).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91806
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Check for a 'python2.7' binary, 'python' and 'python2' are not
provided by the OpenBSD python 2.7.x packages.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Use PKG_CHECK_MODULES to get the flags to link libelf
v2: keep AC_CHECK_LIB as a fallback for elfutils provided
libelf that doesn't install a pkg-config file.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The plan all along was to eventualyl move isl out of the Vulkan
directory, because I intended i965 and anvil to share it.
A small problem I encountered when attempting to write unit tests for
isl precipitated the move. I discovered that it's easier to get isl
unit tests to build if I remove the extra, unneeded dependencies
injected by src/vulkan/Makefile.am. And the easiest way to remove those
unneeded dependencies is to move isl out of src/vulkan. (Unit tests come
in subsequent commits).
Not too long ago, the dri3 code was living in src/glx, which in itself
was guarded by HAVE_DRI_GLX. As the name suggests we didn't dive into
the folder when dri was disabled, thus we missed that dri3 does not
consider/honour --enable-dri.
Cc: mesa-stable@lists.freedesktop.org
Fixes: 6bd9ba7d07 "loader: Add dri3 helper"
Cc: Pali Rohár <pali.rohar@gmail.com>
Reported-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
In the pipe-loader reworks, it was missed in one of the new directories it
was used.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
As of last few commits we have a static and dynamic pipe-loader. Either
of which will be used with (almost) all targets..
We can look into allowing the user to select which way the targets are
built, be that 'static for all' or 'per target' in follow up commits.
After which we can look into building only the static or dynamic
version, although building both shouldn't cause any issues.
Hack/workaround alert:
Control the standalone pipe-drivers via HAVE_CLOVER. Will need to be
fixed as the targets are converted/configure knobs are in.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Rob Clark <robclark@freedesktop.org>
... in favour of HAVE_LIBDRM. After all we solely want to build the code
when the latter is available.
In the not too distant future we will remove the libudev/sysfs
dependency and simplify configure.ac even further.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Rob Clark <robclark@freedesktop.org>
Will be used as a counterpart for target-helpers'
kms_swrast_create_screen().
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Rob Clark <robclark@freedesktop.org>
Using HAVE_DRI2 to manage it seems counter-intuitive.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Rob Clark <robclark@freedesktop.org>
The referenced variable(s) have been removed with commit abc20120e4
(automake: pipe-loader: remove the 'client' pipe-loader)
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Rob Clark <robclark@freedesktop.org>
v2: From Martin Peres
- Tell we are compiling the dri3 backend in configure.ac
- Update the Makefile.am
- get rid of the LIBDRM_HAS_RENDERNODE_SUPPORT macro
- fix some warnings related to EGLuint64KHR to int64_t conversions
- use dri2_get_dri_config to get the __DRIconfig instead of open-coding it
- replace the occasional tabs with spaces
v3: From Martin Peres
- fix and indent problem (Matt Turner)
- drop the authenticate function, use NULL in the vtable instead (Emil)
- drop some useless includes (Emil Velikov)
- mandate libdrm (Emil Velikov)
- link to xcb-dri3 (Kristian Høgsberg)
- convert to the new loader interface for drwable (Kristian)
- remove some dead code after the dropping of some vfuncs (Kristian)
- add a comment on the topic of rendering to the frontbuffer
v4: From Martin Peres
- do not expose the preserved swap behavior (Acked by Eric Anholt)
Signed-off-by: Boyan Ding <boyan.j.ding@gmail.com>
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.co.uk>
v2: From Martin Peres
- Try to fit in the 80-col limit as much as possible
v3: From Martin Peres
- introduce loader_dri3_helper.la to avoid dragging the xcb dep everywhere (Kristian & Emil)
- get rid of the width, height, dri_screen and is_different_gpu vfuncs (Kristian)
- replace the create/destroy functions with init/fini for dri3 drawables
- prefix static functions with dri3_ and exported ones with loader_dri3 (Emil)
- keep the function definition consistent (Emil)
Signed-off-by: Boyan Ding <boyan.j.ding@gmail.com>
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.co.uk>
virgl/vtest is a swrast driver that allows the
virgl acceleration to be tested without having
a virtual machine.
The backend has a unix socket server that
this connects to.
This is run by setting
LIBGL_ALWAYS_SOFTWARE=y
GALLIUM_DRIVER=virpipe
In this mode all renderering is sent over
a socket to the remote renderer, and the
results are readback and copies to the screen
using drisw. This works well enough to develop
new features and to help debug.
Signed-off-by: Dave Airlie <airlied@redhat.com>
virgl is the 3D acceleration backend for the
virtio-gpu shipping with qemu.
The 3D acceleration is designed around gallium
and TGSI as the virtualisation layer. The backend
renderer translates the virgl interface into
OpenGL currently.
This is the initial import of the driver to mesa.
The kernel driver portions are lined up for drm-next.
Currently this driver supports up to GL3.3 and some
misc extensions if the host driver exposes it. It is
planned to iterate the virgl API to new GL levels
as mesa host drivers gain features.
v2: fix resource tracking across flushes to avoid
->bind hack in mapping.
consolidate mapping and waiting code for transfers.
use u_range for dirt tracking.
handle larger shaders in protocol.
include virtgpu_drm.h in mesa for now.
add translation layer for gallium tgsi to virgl tgsi.
Signed-off-by: Dave Airlie <airlied@redhat.com>
GNU make predefines RM to rm -f but this is not required by POSIX
so ensure that RM is set. This fixes "make clean" on OpenBSD.
v2: use AC_CHECK_PROG
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
CC: "10.6 11.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
This was very useful to get us up-and-going. However, now that we can use
NIR directly for meta shaders, we don't need this anymore and we might as
well drop the glslc dependency.
Similar to fee0686c21, but in this case to
ensure that drm_gralloc and libGLES_mesa are sharing a single screen.
Bumps libdrm_freedreno version dependency, as it requires the new
fd_device_fd() API.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
When checking for LLVM shared libraries, use IMP_LIB_EXT for the extension for
shared libraries appropriate to the target, rather than hardcoding '.so'
Also add some comments to explain why we have this circus of pain.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Since we switched away from calling brwCreateContext() there's a bit of
hacky support we can now delete. This reduces our diff to upstream master.
Signed-off-by: Kristian Høgsberg Kristensen <kristian.h.kristensen@intel.com>
v2: lots of improvements
This is like identity or trace, but simpler. It doesn't wrap most states.
Run with:
GALLIUM_DDEBUG=1000 [executable]
where "executable" is the app and "1000" is in miliseconds, meaning that
the context will be considered hung if a fence fails to signal in 1000 ms.
If that happens, all shaders, context states, bound resources, draw
parameters, and driver debug information (if any) will be dumped into:
/home/$username/dd_dumps/$processname_$pid_$index.
Note that the context is flushed after every draw/clear/copy/blit operation
and then waited for to find the exact call that hangs.
You can also do:
GALLIUM_DDEBUG=always
to do the dumping after every draw/clear/copy/blit operation without
flushing and waiting.
Examples of driver states that can be dumped are:
- Hardware status registers saying which hw block is busy (hung).
- Disassembled shaders in a human-readable form.
- The last submitted command buffer in a human-readable form.
v2: drop pipe-loader changes, drop SConscript
rename dd.h -> dd_pipe.h
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Nine code uses some C11 features, and this
leads to compile error on gcc <= 4.5
Another way would have been to use the
-fms-extensions CFLAG
Signed-off-by: David Heidelberg <david@ixit.cz>
Cc: "10.4 10.5 10.6" <mesa-stable@lists.freedesktop.org>
To properly support the case of waiting on a fence with a 0 timeout, we
still need to call down to the kernel. Which requires the use of the
new fd_pipe_wait_timeout() API.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
v2: - lots of changes according to Emil Velikov's comments
- implemented radeon_winsys::read_registers
v3: - a lot of new work, many of them adapt to libdrm interface changes
Squashed patches:
winsys/amdgpu: implement radeon_winsys context support
winsys/amdgpu: add reference counting for contexts
winsys/amdgpu: add userptr support
winsys/amdgpu: allocate IBs like normal buffers
winsys/amdgpu: add IBs to the buffer list, adapt to interface changes
winsys/amdgpu: don't use KMS handles as reloc hash keys
winsys/amdgpu: sync buffer accesses to different rings
winsys/amdgpu: use dependencies instead of waiting for last fence v2
gallium/radeon: unify buffer_wait and buffer_is_busy in the winsys interface (amdgpu part)
winsys/amdgpu: track fences per ring and be thread-safe
winsys/amdgpu: simplify waiting on a variable in amdgpu_fence_wait
gallium/radeon: allow the winsys to choose the IB size (amdgpu part)
winsys/amdgpu: switch to new amdgpu_cs_query_fence_status interface
winsys/amdgpu: handle fence and dependencies merge
winsys/amdgpu follow libdrm change to move user fence into UMD
winsys/amdgpu: use amdgpu_bo_va_op for va map/unmap v2
winsys/amdgpu: use the new tiling flags
winsys/amdgpu: switch to new GTT_USWC definition
winsys/amdgpu: expose amdgpu_cs_query_reset_state to drivers
winsys/amdgpu: fix valgrind warnings
winsys/amdgpu: don't use VRAM with APUs that don't have much of it
winsys/amdgpu: require LLVM 3.6.1 for VI because of bug fixes there
winsys/amdgpu: remove amdgpu_winsys::num_cpus
winsys/amdgpu: align BO size to page size
winsys/amdgpu: reduce BO cache timeout
winsys/amdgpu: remove useless flushing and waiting in amdgpu_bo_set_tiling
winsys/amdgpu: use amdgpu_device_handle as a unique device ID instead of fd
winsys/amdgpu: use safer access to amdgpu_fence_wait::signalled
winsys/amdgpu: allow maximum IB size of 4 MB
winsys/amdgpu: add ip_instance into amdgpu_fence
gallium/radeon: add RING_COMPUTE instead of RADEON_FLUSH_COMPUTE
winsys/amdgpu: set the ring type at CS initilization
winsys/amdgpu: query the GART page size from the kernel
winsys/amdgpu: correctly wait for shared buffers to become idle
winsys/amdgpu: set the amdgpu_cs_fence structure only once at fence creation
winsys/amdgpu: add a specific error message for cs_submit -> -ENOMEM
winsys/amdgpu: check num_active_ioctls before calling amdgpu_bo_wait_for_idle
winsys/amdgpu: clear user fence BO after allocating it
winsys/amdgpu: fix user fences
winsys/amdgpu: make amdgpu_winsys_create public
winsys/amdgpu: remove thread offloading
winsys/amdgpu: flatten the amdgpu_cs_context structure and simplify more
v4: require libdrm 2.4.63
Cuts about 1k of .text size.
text data bss dec hex filename
4983676 197808 26328 5207812 4f7704 i965_dri.so before
4982522 197800 26328 5206650 4f727a i965_dri.so after
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Cuts about 9k of .text size.
text data bss dec hex filename
4992804 197808 26328 5216940 4f9aac i965_dri.so before
4983676 197808 26328 5207812 4f7704 i965_dri.so after
Also, Darwin's libm does not ever set errno, so if we care about those
systems we shouldn't rely on errno anyway.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
We must have versioned library in mesa.icd, because ICD loader would
fail if the mesa-devel package wasn't installed.
Cc: "10.6" <mesa-stable@lists.freedesktop.org>
Reported-by: Fabian Deutsch <fabian.deutsch@gmx.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73512
Signed-off-by: Igor Gnatenko <i.gnatenko.brain@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
We can make use of it over mkstemp + fcntl in the egl/wayland code.
Cc: Axel Davy <axel.davy@ens.fr>
Suggested-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Prompt at configure time if it's missing otherwise we'll fail later on
in the build. Remove ambiguous HAVE_LIBDRM guard.
Cc: 10.6 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
... and update the documentation to reflect reality.
null and gdi are gone, and surfaceless is a recent addition.
v2: s/platforms/platform/ (spotted by Thomas)
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Thomas Helland <thomashelland90@gmail.com>
Simplify things by merging the two makefiles. This way we can combine
the duplicated HAVE_PLATFORM_ checks, and build the library without
having a separate static library.
v2: use $() when referencing variables, use correct define (Matt)
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
As of last commit the only user of it (radeon/r200) no longer uses it.
As such let's remove it and cleanup the nasty hacks that we had in place
to support this.
v2: Leave LIBDRM_CFLAGS around.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> (v1)
Reviewed-by: Marek Olšák <marek.olsak@amd.com> (v1)
These conditionals are used to guard both dri modules and loader(s).
Currently if we try to build the gallium swrast dri module (without glx)
on a system that's missing libdrm the build will fail.
v2: Make sure we assign prior to checking the have_libdrm variable.
Cc: 10.6 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
These are really useful hints to the compiler in the absence of link-time
optimization, and I'm going to use them in VC4.
I've made the const attribute be ATTRIBUTE_CONST unlike other function
attributes, because we have other things in the tree #defining CONST for
their own unrelated purposes.
v2: Alphabetize.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (v1)
It was only useful for st/egl, although I've never got to merging the
pipe-loader and inline-helpers before it was removed. There are no users
for it ATM.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Lionel Landwerlin
Dave Airlie
Chuck Atkins
Nicolai Hähnle
Steven Toth
Timothy Arceri
Tim Rowley
Jon Turney
Brendan King
Jason Ekstrand
Matt Turner
Eric Engestrom
Jason Ekstrand
Kristian Høgsberg Kristensen
Jan Ziak
Rob Clark
Eric Anholt
Andreas Boll
Yaakov Selkowitz
Serge Martin
Akihiko Odaki
Emil Velikov
Dylan Baker
Kyle Brenneman
Nicolas Boichat
Rob Herring
Andres Gomez
Leo Liu
Emil Velikov
Jonathan Gray
Marek Olšák
Dongwon Kim
Christian König
Kristian Høgsberg Kristensen
Jan Vesely
Jose Fonseca
Oded Gabbay
Ben Skeggs
Chad Versace
Boyan Ding
Boyuan Zhang
Dave Airlie
Ilia Mirkin
Jeremy Huddleston
Tapani Pälli
David Heidelberg
Igor Gnatenko