User are encouraged to switch to LLVM 7.0 released in September 2018.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
40% is the decrease in the LGKM counter (which includes SMEM too)
for the GFX9 LSHS stage.
This will make the LDS size slightly larger, but I wasn't able to increase
the patch stride without corruption, so I'm increasing the vertex stride.
color_interp_vgpr_index was declared as a generic char value.
Because signed values are used in this variable, the result
was not safe across architectures and crashed on ppc64[el]
and arm.
Declare color_interp_vgpr_index as a signed type.
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
As precursor to moving init to common code, just rename the struct
and move it.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
GS is tested, tessellation is untested.
Have outputs_written_before_ps for HW VS and outputs_written for other
stages. The reason is that COLOR and BCOLOR alias for HW VS, which
drives elimination of VS outputs based on PS inputs.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
It will contain more variables.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Tested-by: Benedikt Schemmer <ben at besd.de>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
so that it can be removed and replaced with inline VBO descriptors,
and the pointer can be packed in unused bits of VBO descriptors.
This also removes the pointer from merged TES-GS where it's useless.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
TCS_OUT_LAYOUT has 13 unused bits. That's enough for a 32-bit address
aligned to 512KB. Hey, it's a 13-bit pointer!
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
If 32-bit pointers are supported, both pointers can be moved into s[0:1]
and then ESGS has exactly the same user data SGPR declarations as VS.
If 32-bit pointers are not supported, only one pointer can be moved into
s[0:1]. In that case, the 2nd pointer is moved before TCS constants,
so that the location is the same in HS and GS.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
We need to account for SGPR locations in merged shaders.
This case is exercised by KHR-GL45.enhanced_layouts.vertex_attrib_locations
Fixes: 79c2e7388c ("radeonsi/gfx9: use SPI_SHADER_USER_DATA_COMMON")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
There's a race condition between si_shader_select_with_key and
si_bind_XX_shader:
Thread 1 Thread 2
-------- --------
si_shader_select_with_key
begin compiling the first
variant
(guarded by sel->mutex)
si_bind_XX_shader
select first_variant by default
as state->current
si_shader_select_with_key
match state->current and early-out
Since thread 2 never takes sel->mutex, it may go on rendering without a
PM4 for that shader, for example.
The solution taken by this patch is to broaden the scope of
shader->optimized_ready to a fence shader->ready that applies to
all shaders. This does not hurt the fast path (if anything it makes
it faster, because we don't explicitly check is_optimized).
It will also allow reducing the scope of sel->mutex locks, but this is
deferred to a later commit for better bisectability.
Fixes dEQP-EGL.functional.sharing.gles2.multithread.simple.buffers.bufferdata_render
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
It's inaccurate. Instead, see the copyright and use "git log" and
"git blame" to know the authorship.
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
SI_SGPR_CONST_AND_SHADER_BUFFERS now contains the pointer to const buffer 0
if there is no other buffer there.
Benefits:
- there is no constbuf descriptor upload and shader load
It's assumed that all constant addresses are within bounds. Non-constant
addresses are clamped against the last declared CONST variable.
This only works if the state tracker ensures the bound constant buffer
matches what the shader needs.
Once we get 32-bit pointers, we can only do this for user constant buffers
where the driver is in charge of the upload so that it can guarantee a 32-bit
address.
The real performance benefit might not be measurable.
These apps get 100% theoretical benefit in all shaders (except where noted):
- antichamber
- barman arkham origins
- borderlands 2
- borderlands pre-sequel
- brutal legend
- civilization BE
- CS:GO
- deadcore
- dota 2 -- most shaders
- europa universalis
- grid autosport -- most shaders
- left 4 dead 2
- legend of grimrock
- life is strange
- payday 2
- portal
- rocket league
- serious sam 3 bfe
- talos principle
- team fortress 2
- thea
- unigine heaven
- unigine valley -- also sanctuary and tropics
- wasteland 2
- xcom: enemy unknown & enemy within
- tesseract
- unity (engine)
Changed stats only:
SGPRS: 2059998 -> 2086238 (1.27 %)
VGPRS: 1626888 -> 1626904 (0.00 %)
Spilled SGPRs: 7902 -> 7865 (-0.47 %)
Code Size: 60924520 -> 60982660 (0.10 %) bytes
Max Waves: 374539 -> 374526 (-0.00 %)
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
The GLSL rules for interpolateAtSample are unfortunate:
"Returns the value of the input interpolant variable at
the location of sample number sample. If
multisample buffers are not available, the input
variable will be evaluated at the center of the pixel.
If sample sample does not exist, the position used to
interpolate the input variable is undefined."
This fix will fallback to monolithic shader compilation when
interpolateAtSample is used without multisampling.
One alternative would be to always upload 16 sample positions,
filling the buffer up with repetition when the actual number of
samples is less, and then ANDing the sample ID with 0xf. However,
that punishes all well-behaving users of interpolateAtSample,
when in reality, only conformance tests should be affected by
the issue.
Fixes
dEQP-GLES31.functional.shaders.multisample_interpolation.interpolate_at_sample.non_multisample_buffer.*
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
gl_SampleMaskIn is supposed to contain set bits only for the samples that
are covered by the current fragment shader invocation, but the VGPR
initialization hardware loads the set of all bits that are covered at the
current pixel.
Fixes various tests in
dEQP-GLES31.functional.shaders.sample_variables.sample_mask_in.*
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This removes the barrier and LDS stores and loads for tess factors
when it's possible. The removal of the barrier seems more important
to me though.
In one shader, it removes 17 * 4 bytes from the shader binary.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
When the HS wave is empty, the hardware writes the LS VGPRs starting at
v0 instead of v2. Workaround by shifting them back into place when
necessary. For simplicity, this is always done in the LS prolog.
According to the hardware team, this will be fixed in future chips,
so take that into account already.
Note that this is not a bug fix, as the bug was already worked
around by commit 166823bfd2 ("radeonsi/gfx9: add a temporary workaround
for a tessellation driver bug"). This change merely replaces the
workaround by one that should be better.
v2: add workaround code to shader only when necessary
v3: clarify the prefer_mono comment
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
A new pair of user SGPR is needed for loading the bindless
descriptors from shaders. Because the descriptors are global for
all stages, there is no need to add separate indices for GFX9.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Marek Olšák
Timothy Arceri
Samuel Pitoiset
Sonny Jiang
Timothy Pearson
Dave Airlie
Nicolai Hähnle