We'd like to avoid __glXInitialize as much as possible since it involves
taking a global lock. This means converting internal APIs to operate as
much as possible in terms of something other than a Display *, since if
that's all you have then you're forced to call __glXInitialize to get to
the glx_display.
The contortions in DRI2 displease me, but DRI2 displeases me, so.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10418>
One, only applegl needs this. Two, this isn't a function of the context
in any way so it doesn't belong in the context vtable. Just special-case
applegl for now, we can revisit applegl's dispatch later.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9690>
The client-side implementation of this operates entirely in terms of the
GL and X client APIs. There's nothing DRI-specific about it, evidenced
by apple and windows using it unchanged. Save a little code size by
handling the direct/indirect difference directly.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9690>
For the DRI backends we factor this out to a dri_common_create_context
method. Indirect gets the same transformation but doesn't use the common
method since it can't rely on DRI being built.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7660>
Most of the legacy CreateContext paths already did this, this is just
aligning the two so we can implement one in terms of the other.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7660>
Now that we introduced the generic glx_extension_override option,
we can remove the glx_disable_oml_sync_control,
glx_disable_sgi_video_sync, and glx_disable_ext_buffer_age ones.
It seems like the only user for them was the vmwgfx, and only for
Gnome and Compiz which are covered by the default mesa driconf. This
means that it is unlikely for a user to have these options set in
their local driconf file.
Suggested-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Signed-off-by: Martin Peres <martin.peres@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7252>
Support for DRI1 is not implemented, but who still uses that?
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Martin Peres <martin.peres@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7212>
Support for DRI1 is not implemented, but who still uses that?
v2:
- Add the option to the list of new features
- Drop overriding the Xorg-exposed extensions
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Martin Peres <martin.peres@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7212>
This is a minor bugfix, in that the prior code required that the server
expose either XFree86-DRI or DRI2 to get the name; Xwayland exposed
neither, just DRI3. Now, for DRI2 and DRI3, we just ask the loader. It
also means we report "swrast" for the driver name when that's what we're
using, which is probably a good thing.
v2: Trust the driver name from the server for DRI2 (Michel Dänzer)
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7219>
This is a slight generalization of the existing SGI and MESA swap
control extensions, and a prerequisite for GLX_EXT_swap_control_tear.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6671>
Passes all of `dEQP-EGL.functional.swap_buffers_with_damage.*`:
Passed: 36/54 (66.7%)
Failed: 0/54 (0.0%)
Not supported: 18/54 (33.3%)
Warnings: 0/54 (0.0%)
Waived: 0/54 (0.0%)
The "not supported" ones are the `preserve_buffer_*` tests, which is not
supported on X11/DRI3.
Cc: 20.2 <mesa-stable>
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/3030
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6132>
Currently we set the logger only for DRI3. Even though it's used nearly
everywhere. For platforms where we don't the function is effectively a
no-op.
With this in place, LIBGL_DEBUG=verbose works across the board.
Fixes: d971a4230d ("loader: Factor out the common driver opening logic from each loader.")
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4084>
This is the GLX counterpart to EGL_KHR_no_config_context. Contexts may
now be created without reference to an fbconfig, in which case it is
treated as compatible with any fbconfig (and thus any GLX drawable).
Khronos: https://github.com/KhronosGroup/OpenGL-Registry/pull/102
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Just provide a "(null)" literal in case driverName is NULL.
In file included from ../src/glx/dri3_glx.c:76:
../src/glx/dri3_glx.c: In function ‘dri3_create_screen’:
../src/glx/dri_common.h:70:36: error: ‘%s’ directive argument is null [-Werror=format-overflow=]
70 | #define CriticalErrorMessageF(...) dri_message(_LOADER_FATAL, __VA_ARGS__)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/glx/dri3_glx.c:1002:4: note: in expansion of macro ‘CriticalErrorMessageF’
1002 | CriticalErrorMessageF("failed to load driver: %s\n", driverName);
| ^~~~~~~~~~~~~~~~~~~~~
../src/glx/dri3_glx.c:1002:50: note: format string is defined here
1002 | CriticalErrorMessageF("failed to load driver: %s\n", driverName);
| ^~
cc1: some warnings being treated as errors
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We were caching only the value set with glXSwapIntervalSGI(), missing out
on the default setting of the swap interval by the loader. This fixes
glxgears's warning about being vblank synchronized by default.
Fixes: 9777c4234b ("loader: drop the [gs]et_swap_interval callbacks")
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
v2: Only reject no-error contexts for too-old GL if we're actually
trying to create a no-error context (Adam Jackson)
v3: Fix share contexts (Adam Jackson)
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
The only thing you do with a dri driver handle is get the extensions
pointer, so just fold it in to simplify the callers.
v2: Add the declaration of driGetDriverExtensions() that got lost in a
rebase.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com> (v1)
Reviewed-by: Emil Velikov <emil.velikov@collabora.com> (v1)
The version passed to QueryVersion requests is the version that the
client supports. We were just passing in whatever version of XCB was
present on the system, which may not be a version that Mesa actually
explicitly supports, e.g. it might bring unwanted semantics.
Set specific protocol versions which we support, and only pass those.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Fixes: 7aeef2d4ef ("dri3: allow building against older xcb (v3)")
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The previous commit to make DRI3 modifier support optional, breaks with
an updated server and old client.
Make sure we never set multibuffers_available unless we also support it
locally. Make sure we don't call stubs of new-DRI3 functions (or empty
branches) which will never succeed.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Fixes: 7aeef2d4ef ("dri3: allow building against older xcb (v3)")
If PresentCompleteNotify event says the pixmap was presented
with mode PresentCompleteModeSuboptimalCopy, it means the pixmap
could possibly have been flipped instead if allocated with a
different format/modifier.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Add support for DRI3 v1.1, which allows pixmaps to be backed by
multi-planar buffers, or those with format modifiers. This is both
for allocating render buffers, as well as EGLImage imports from a
native pixmap (EGL_NATIVE_PIXMAP_KHR).
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Drivers on virtual hardware don't want to expose this extension to
GLX compositors, similarly to GLX_OML_sync_control, since that significantly
increases latency.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Removing this callback caused rendering corruption in some multi-screen cases,
so it is reinstated but without the drawable argument which was never used
by implementations and was confusing since the drawable could have been
created with another screen.
Cc: "17.3 18.0" mesa-stable@lists.freedesktop.org
Fixes: 5198e48a0d (loader_dri3/glx/egl: Remove the loader_dri3_vtable get_dri_screen callback)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105013
Reported-by: Daniel van Vugt <daniel.van.vugt@canonical.com>
Tested-by: Timo Aaltonen <tjaalton@ubuntu.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
deviceName string is declared, assigned and freed but actually
never used in dri3_create_screen() function.
Fixes: 2d94601582 ("Add DRI3+Present loader")
Signed-off-by: Vadym Shovkoplias <vadym.shovkoplias@globallogic.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Without this, trying to create a GLX_RGBA_FLOAT_TYPE_ARB context would
fail, because GLX_RGBA_TYPE would be a mismatch with the fbconfig.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This more or less ports EGL_KHR_no_config_context to GLX.
v2: Enable the extension only for those backends that support it.
Khronos: https://github.com/KhronosGroup/OpenGL-Registry/pull/102
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This should be safe as these backends already support the EGL version of
this extension. DRI1 is not affected because it does not support
GLX_ARB_create_context anyway. DRI-Windows is not prepared to implement
this as there's no equivalent WGL extension, and wglCreateContextAttribs
seems to really want the HDC's pixel format to be set.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Neil Roberts <neil@linux.intel.com>
The code was relying on us always having a current context for client local
image blit operations. Otherwise the blit would be skipped. However,
glxSwapBuffers, for example, doesn't require a current context and that was a
common problem in the dri1 era. It seems the problem has resurfaced with dri3.
If we don't have a current context when we want to blit, try creating a private
dri context and maintain a context cache of a single context.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
It's not very usable since in the rare, but definitely existing case that
we don't have a current context, it will return NULL.
Presumably it will always be safe to use the dri screen the drawable was
created with for operations on that drawable.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Having two callbacks to manage a single int seems like an overkill.
Use a cached copy and update that when needed.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
---
Might want to look if the dimensions dance in .query_surface ...
speaking of which close to nobody implements that ...
Provide a dri3 implementation for the image loader extension method.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
As of last commit, no invalid swap interval can be stored, so there's
no need to sanitize the values when reading them anymore.
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
With GLX_EXT_buffer_age turned on, gnome-shell will use full-screen damage
with GLX, which severely hurts performance with architectures that emulate
page-flips with copies. Like vmware. We would like to be able to turn off that
extension. Similarly, typically the GLX_OML_sync_control doesn't make much
sense on a virtual architecture since we don't really sync to the host's
vertical retrace. We'd like to be able to turn it off as well.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
A number of internal VMware apitrace traces image comparisons fail with
dri3 because the viewport transformation becomes incorrect after an X
drawable resize. The incorrect viewport transformation sometimes persist
until the second draw-call after a swapBuffer.
Comparing with the dri2 glx code there are a couple of places where dri2
invalidates the drawable in the absence of server-triggered invalidation,
where dri3 doesn't do that. When these invalidation points are added to
dri3, the image comparisons become correct.
v2:
Addressed review comment by Michel Dänzer.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-and-tested-by: Michel Dänzer <michel.daenzer@amd.com>
v2:
bump version
v3:
Add code comment
s/IsGlThread/IsThread/ (and variation)
v4:
DRI3 doesn't hit X through GL call so it is always safe
Signed-off-by: Gregory Hainaut <gregory.hainaut@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The GLX specification says about glXDestroyPixmap:
"The storage for the GLX pixmap will be freed when it is not current
to any client."
So arguably, functions like glXSwapIntervalMESA can be called after
glXDestroyPixmap has been called for the currently bound GLXPixmap.
In that case, the GLXDRIDrawable no longer exists, and so we just skip
those calls.
Cc: 17.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
With a subsequent patch, we might see NULL loaderPrivates, e.g. when
a DRIdrawable is flushed whose corresponding GLXDRIdrawable was destroyed.
This resulted in a crash, since the loader vs. DRI3 drawable structures
have a non-zero offset.
Fixes glx-visuals-{depth,stencil} -pixmap
Cc: 17.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
In OpenGL 3.0 and later it is legal to make a context current without
a default framebuffer.
This has been broken since DRI3 support was introduced.
Cc: "13.0 12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>