deqp-runner uprevved to reduce memory usage on HW runners, let us
experiment with shader cache on tmpfs, and hopefully provide a tool for
virgl to be able to plausibly run piglit under crosvm instead of vtest.
piglit uprevved to avoid a flake in softpipe in glx-multithread-texture,
and improve performance of the test, too. This also brings in the
fbo-blending-format-quirks fix to properly initialize the buffers, fixing
some fails/flakes.
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15419>
Unaligned gmem store is a mostly untested path since most
of the times faster path is chosen. We have to force unaligned
store to really test it.
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15773>
Otherwise the driver setting interacts with it.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 939ddccb7a ("anv: Add support for depth bounds testing.")
Fixes: 1df871f8ff ("iris: Add support for depth bounds testing.")
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15763>
When porting lavapipe to the common sync framework, I stole the dummy
sync signal_for_memory idea from RADV but didn't actually do it
correctly. Unless you set wsi_device::signal_semaphore_with_memory and
wsi_device::signal_fence_with_memory, it doesn't actually signal
anything. If you do set those, it works but also results in dummy
syncs being created for present fences which we see as signals. We
could choose to just skip those like RADV does but that's too magic.
Instead, have our own AcquireNextImage2() again which sets dummy syncs.
Fixes: 3b547a9b58 ("lavapipe: Switch to the common sync framework")
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15774>
Cube descriptors require a different sampling instruction in shader,
however we don't know whether image is a cube or not until the start
of a renderpass. We have to patch the descriptor to make it compatible
with how it is sampled in shader.
For the reference subpassLoad is currently translated into isaml.a
Blob v615 also doesn't handle this case correctly.
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15734>
When we don't have a good dxcompiler.dll that we can load IDxcLibrary
from to help with diagnostics, we currently return true for validation
even if the validation actually failed.
Let's fix that, and also add a debug-message explaining what went wrong
for those who are debugging and wondering what's up.
Fixes: 2ea15cd661 ("d3d12: introduce d3d12 gallium driver")
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15744>
In order to ensure consistent results when running performance tests,
lock the frequency for Intel GPUs to ~70% of the maximum allowed by
hardware.
This seems to offer a good balance between execution speed and results
consistency.
An increase of the frequency will also increase the rate of throttling
events, with a negative impact on consistency. Such events are logged,
as in the following example:
GPU throttling detected: act=200 min=850 cur=850 RPn=100
This shows the actual GPU frequency (200 MHz) dropped below the minimum
requested (850 MHz).
For more details about the various frequency information sources, please
see the script header comments in ".gitlab-ci/common/intel-gpu-freq.sh".
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15662>
The script will be used for tuning Intel GPU frequency to maximize
performance tests execution, while also trying to reduce throttling,
which has a negative impact on results consistency.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15662>
Add script to manage Intel GPU frequencies.
It can be used for debugging performance problems or to lock a stable
frequency while executing benchmark tests.
Typical use cases:
- Get all available GPU frequency information
$ ./intel-gpu-freq.sh -g all
* Hardware capabilities
RP0: 1350 MHz
RPn: 100 MHz
RP1: 400 MHz
* Enforcements
max: 1350 MHz
min: 100 MHz
boost: 1350 MHz
* Actual
act: 100 MHz
cur: 400 MHz
- Lock frequency to 80% of the maximum allowed by hardware and enable
throttling detection
$ ./intel-gpu-freq.sh -s 80% -d
GPU throttling detected: act=1050 min=1350 cur=1350 RPn=100
GPU throttling detected: act=1100 min=1350 cur=1350 RPn=100
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15662>
Vulkan spec says:
"When an image view of a depth/stencil image is used as a depth/stencil
framebuffer attachment, the aspectMask is ignored and both depth and
stencil image subresources are used."
Since we use two planes for D32S8 format we have to add a special
case for depth in addition to already existing case for stencil.
Fixes hang in CTS:
dEQP-VK.renderpass.depth_stencil_write_conditions.stencil_kill_write_d32sf_s8ui
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15532>
- When resolving d32s8 to s8 we stored stencil with a wrong format.
- For unaligned multi-sample store we used wrong gmem offset for stencil.
If unaligined store is forced this change fixes a hang in:
dEQP-VK.renderpass2.depth_stencil_resolve.image_2d_32_32.samples_2.d32_sfloat_s8_uint_separate_layouts.compatibility_depth_zero_stencil_zero_testing_stencil
Fixes: b157a5d0d6
("tu: Implement non-aligned multisample GMEM STORE_OP_STORE")
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15532>
This has been initially implemented for raytracing but
VK_EXT_graphics_pipeline_library requires it.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15737>
this interaction requires read-only sampler access from
depth component with writes to the stencil component, which can only
be done in the GENERAL layout
affects:
GTF-GL46.gtf30.GL3Tests.framebuffer_blit.framebuffer_blit_functionality_color_and_stencil_blit
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15716>
ssbo binds are always at least readable, so without deeper shader
inspection, never assume that write binds mean no read access
this is different than image descriptors which can explicitly get
write-only access set
cc: mesa-stable
fixes#6231
THANKS TO @daniel-schuermann FOR SOLVING THIS WITH HIS INCREDIBLE TALENT AND WIT
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15697>
They're both implemented in common code as long as you use
vk_command_buffer.
Acked-by: Emma Anholt <emma@anholt.net>
Acked-by: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15560>
The common Vulkan sync framework will do most of the queueing for us.
It will even sort out timeline semaphore dependencies and ensure
everything executes in-order. All we have to do is make sure our
vk_sync type implements VK_SYNC_FEATURE_WAIT_PENDING. This lets us get
rid of a big pile of code.
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15651>
To avoid altering any currently existing callers, we continue on with
the calculation regardless of overflow. This also matches the behavior
of GCC's __builtin_add_overflow().
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15651>
Emma Anholt
Jason Ekstrand
Danylo Piliaiev
Lionel Landwerlin
Erik Faye-Lund
Cristian Ciocaltea
Vadym Shovkoplias
Samuel Pitoiset
Mike Blumenkrantz
Renato Pereyra