Rather than having to keep track of all the build systems and their respecitve
definition of the mesa version, use a single top file VERSION. Every build
system is responsible for reading/parsing the file and using it
v2:
* remove useless bulletpoint from the documentation, suggested by Matt
* "Androing is Linux. Use '/' in stead of '\'", spotted by Chad V
* use cleaner code to get the version in scons, suggested by Chad V
v3:
* ensure leading and trailing whitespace characters are stripped while parsing
* android: handle GNU shell commands approapriately
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Bump major version, as the change to require explicit
xa_context_flush(), the addition of the handle-type parameter to
xa_surface_handle(), and change of surface to ref/unref will require a
minor change in DDX.
The current gen_matypes logic assumes that the host compiler will produce
information that is useful for the target compiler. Unfortunately, this
is not the case whenever cross-compiling.
When we detect that we're cross-compiling and using GCC, use the target
compiler to produce assembly from the gen_matypes.c source, then process
it with a shell script to create a usable header. This is similar to how
the linux kernel creates its asm-offsets.c file.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Use grep -w instead of the empty string escape sequences
which are less portable. Makes the grep tests
function as intended on OpenBSD.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Vinson Lee <vlee@freedesktop.org>
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
The AC_CHECK_FILE macro can't be used for cross compiling as it will
result in "error: cannot check for file existence when cross compiling".
Replace it with the AS_IF macro.
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Jonathan Liu <net147@gmail.com>
eglplatform.h defaults to X11 on Unix unless told otherwise, so if we're doing a
build without any X11 support tell it so that we don't try including headers
that don't exist.
Also set GL_PC_FLAGS so that the definition is in egl.pc, so that applications
using EGL don't try to pull in X11 headers on systems where EGL was configured
without X11 support.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64959
Signed-off-by: Ross Burton <ross.burton@intel.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
The adreno a3xx GPU is found in newer snapdragon devices, such as the
nexus4. The a3xx is GLESv3 and OpenCL capable, although that is not
enabled yet in gallium.
Compared to a2xx, it introduces an entirely new unified shader ISA, and
re-shuffles all or nearly all of the registers. The good news is that
(for the most part) the registers are more orthogonal, not combining
unrelated state in a single register. And that there is a lot more
flexibility, so we don't need to patch and re-emit the shader like we
did on a2xx.
The shader compiler is currently quite dumb, there would be a lot of
room for improvement with an optimizing pass. Despite that, with the
a320 in my nexus4 it seems to be ~2-3x faster compared to the a220 in my
HP touchpad.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Split the parts that are specific to adreno a2xx series GPUs from the
parts that will be in common with a3xx, so that a3xx support can be
added more cleanly.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
This patch unifies mesa's PACKAGE_VERSION on autotools, scons and
Android build systems.
Current behaviour is:
- Autotools uses 9.2.0 as PACKAGE_VERSION
- Scons and Android use 9.2-devel as PACKAGE_VERSION
With this patch all three build systems use 9.2.0-devel as
PACKAGE_VERSION.
Reviewed-by: Brian Paul <brianp@vmware.com>
When building dri-swrast, use gallium_check_st to set HAVE_COMMON_DRI.
Commit 07f2dee7 added setting of HAVE_COMMON_DRI in gallium_check_st.
But the dri-swrast case did not use gallium_check_st.
So dri/common was still not built.
v2: set HAVE_COMMON_DRI=yes instead of using gallium_check_st
NOTE: This is a candidate for the 9.1 branch.
(Depends on 7de78ce5 and 07f2dee)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61821
Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com>
r600g needs it too, so add ipo in the common radeon_llvm_check().
radeonsi compiled and linked, but it failed at dynamic link time
with a missing symbol.
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
This fixes and enables texturing with compressed MSAA colorbuffers
on Evergreen and Cayman. For the first time, multisample textures work
on Cayman.
This requires the libdrm flag RADEON_SURF_FMASK.
v2: require libdrm_radeon 2.4.45
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Not used anymore.
v2: Andreas Boll <andreas.boll.dev@gmail.com>
- split patch into two patches
- remove more unused code
Reviewed-by: Matt Turner <mattst88@gmail.com>
The three users of GALLIUM_PIPE_LOADER_LIBS (OpenCL, gallium-gbm,
gallium tests) don't appear to need libws_xlib.la.
Tested-by: Tom Stellard <thomas.stellard@amd.com>
Tested-by: Aaron Watry <awatry@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
It guarded the function prototype of pipe_loader_sw_probe, whose use (in
pipe_loader.c) and definition (in pipe_loader_sw.c) were not guarded.
Both are built into libpipe_loader.la if HAVE_LOADER_GALLIUM, which is
enable_gallium_loader in configure.ac.
Tested-by: Tom Stellard <thomas.stellard@amd.com>
Tested-by: Aaron Watry <awatry@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
For consistency, since we already have HAVE_PIPE_LOADER_{SW,DRM}.
Tested-by: Tom Stellard <thomas.stellard@amd.com>
Tested-by: Aaron Watry <awatry@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Added in e1364530 but never used.
Tested-by: Tom Stellard <thomas.stellard@amd.com>
Tested-by: Aaron Watry <awatry@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
It's next to useless, since it just allows you to turn off VDPAU and
XvMC with a single switch. Just check whether Gallium drivers are
enabled instead.
Reviewed-by: Christian König <christian.koenig@amd.com>
v2: Remove left over code
v3: Restage properly the commit so hunk of first one are not in
second one.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Currently the vdpau and xvmc detection code, is enabled for all builds. The
state trackers exist only within gallium. Enable whenever at least one gallium
driver is selected
v2: removed stray '-a'
[mattst88 v3]: Removed stray $.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=63645
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Since we now have UVD support we should enable them by default.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
configure still uses it to print the enabled winsys.
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-and-Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
configure still uses it to print the enabled targets.
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-and-Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
And don't build it from other Makefiles. That's awful, and breaks
distclean.
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-and-Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-and-Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
configure still uses it to print the enabled state trackers.
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-and-Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-and-Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Neither are used in Makefile.ams.
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-and-Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-and-Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
A step toward working make dist/distcheck.
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-and-Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Just everything you need for UVD with r600g and radeonsi.
v2: move UVD code to radeon subdir, clean up build system additions,
remove an unused SI function, disable tiling on SI for now.
v3: some minor indentation fix and rebased
v4: dpb size calculation fixed
v5: implement proper fall-back in case the kernel doesn't support UVD,
based on patches from Andreas Boll but cleaned up a bit more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Clover needs the irreader component of llvm
v2: Check for irreader component
irreader is only available with LLVM 3.3 >= 177971
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Niels Ole Salscheider <niels_ole@salscheider-online.de>
Emil Velikov
Kenneth Graunke
Rob Clark
Matt Turner
Mike Frysinger
Jean-Sébastien Pédron
Jonathan Gray
Klemens Baum
Jonathan Liu
Alex Deucher
Ross Burton
Andreas Boll
Mike Stroyan
Andreas Hartmetz
Marek Olšák
Brian Paul
Chia-I Wu
Jerome Glisse
José Fonseca
Christian König
Tom Stellard
Johannes Obermayr
Niels Ole Salscheider