The default pixel hashing mode settings used for slice and subslice
load balancing are far from optimal under certain conditions (see the
comments below for the gory details). The top-of-the-line GT4 parts
suffer from a particularly severe performance problem currently due to
a subslice load balancing issue. Fixing this seems to improve
graphics performance across the board for most of the benchmarks in my
test set, up to ~20% in some cases, e.g. from SKL GT4:
unigine/valley: 3.44% ±0.11%
gfxbench/gl_manhattan31: 3.99% ±0.13%
gputest/pixmark_piano: 7.95% ±0.33%
synmark/OglTexFilterAniso: 15.22% ±0.07%
synmark/OglTexMem128: 22.26% ±0.06%
Lower-end platforms are also affected by some subslice load imbalance
to a lesser degree, especially during CCS resolve and fast clear
operations, which are handled specially here due to rasterization
ocurring in reduced CCS coordinates, which changes the semantics of
the pixel hashing mode settings.
No regressions seen during my tests on some SKL, KBL and BXT
configurations. Additional benchmark reports welcome on any Gen9
platforms (that includes anything with Skylake, Broxton, Kabylake,
Geminilake, Coffeelake, Whiskey Lake, Comet Lake or Amber Lake in your
renderer string).
P.S.: A similar problem is likely to be present on other non-Gen9
platforms, especially for CCS resolve and fast clear operations.
Will follow-up with additional patches fixing the hashing mode
for those once I have enough performance data to justify it.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This is a bit of a hack, but it'll hold us over until we have 64-bit
support wired through.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
This used a delicate hack to try to find indirect inputs and skip them
as candidates for pairing. Let's use a better criterion -- no sources --
and pair based on that.
We could do better, but that would require more complex data flow
analysis than we're interested in doing here.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
We implement gl_WorkGroupID and gl_LocalInvocationID, which map to
ld_compute_id with special sources.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
This allows liveness analysis within a loop to be more fine grained,
fixing RA failures with partial spilled movs within a loop, as well as
enabling a slight reduction of register pressure more generally:
total registers in shared programs: 350 -> 347 (-0.86%)
registers in affected programs: 12 -> 9 (-25.00%)
helped: 3
HURT: 0
helped stats (abs) min: 1 max: 1 x̄: 1.00 x̃: 1
helped stats (rel) min: 25.00% max: 25.00% x̄: 25.00% x̃: 25.00%
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Just laying the groundwork. Reads and writes should be supported (both
direct and indirect, either int or float, vec1/2/3/4), but no bounds
checking is done at the moment.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
This is a corner case that happens a lot with SSBOs. Basically, if we
only read a few components of a uniform, we need to only spill a few
components or otherwise we try to spill what we spilled and RA hangs.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
We don't want to load a 128-bit sysval when 64-bits will do. Fixes RA
failures with SSBO indirect writes.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Sometimes a sysval is used to facilitate an instruction but is not the
instruction itself.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
This is of course suboptimal for performance, forcing each
glDispatchCompute call to be submitted separately to the kernel and
finish to completion. However, for the initial bring-up of compute jobs,
this simplifies quite a bit.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
For each SSBO index we get from Gallium/NIR, we need two pieces of
information in the shader:
1. The address of the SSBO in GPU memory. Within the shader, we'll be
accessing it with raw memory load/store, so we need the actual address,
not just an index.
2. The size of the SSBO. This is not strictly necessary, but at some
point, we may like to do bounds checking on SSBO accesses.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
This u_prim.h helper determines the number of outputs for stream output,
given a particular primitive type and a vertex count. This is useful for
statically calculating sizes of stream output buffers (i.e. when there
is no geometry/tessellation shader in use).
This helper will be used in Panfrost's transform feedback
implementation, as you can probably guess since why else would I be
submitting it....
See also dEQP's getTransformFeedbackOutputCount routine.
v2: Simplify definition using new helpers, which also extends to non-ES2
primitive types (Eric).
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
v2: squash with Timur Kristof's commit
Reviewed-By: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
By optimizing the shader before inlining, we avoid having to redo this
work for each inlined copy of a function. It should also reduce the
memory consumption a bit.
This cuts the KHR-GL46.arrays_of_arrays_gl.SubroutineFunctionCalls2
runtime by 25% on my Icelake. That test compiles many shaders, which
contain large types (dmat4) and division (expensive operations).
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
[27/31] Compiling C object 'src/gallium/drivers/etnaviv/df32d18@@etnaviv@sta/etnaviv_compiler_nir.c.o'.
In file included from ../../src/gitlab_mesa/src/gallium/drivers/etnaviv/etnaviv_compiler_nir.c:552:
../../src/gitlab_mesa/src/gallium/drivers/etnaviv/etnaviv_compiler_nir_emit.h: In function 'ra_assign':
../../src/gitlab_mesa/src/gallium/drivers/etnaviv/etnaviv_compiler_nir_emit.h:903:9: warning: unused variable 'ok' [-Wunused-variable]
bool ok = ra_allocate(g);
^~
../../src/gitlab_mesa/src/gallium/drivers/etnaviv/etnaviv_compiler_nir.c: In function 'etna_compile_shader_nir':
../../src/gitlab_mesa/src/gallium/drivers/etnaviv/etnaviv_compiler_nir.c:663:9: warning: unused variable 'ok' [-Wunused-variable]
bool ok = emit_shader(c->nir, &options, &v->num_temps, &num_consts);
^~
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Bas Nieuwenhuizen
Francisco Jerez
Alyssa Rosenzweig
Marek Olšák
Kenneth Graunke
Christian Gmeiner