Because these formats are introduced trough an extension, their
enum values are exceedingly large and we cannot use them to index
directly into the format table we had for core formats. Instead,
we put these in a separate table and we always use the
VK_ENUM_OFFSET helper to index into these tables.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14533>
V3D does not support formatless writings.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14288>
Occlusion queries are supported always but only the number of
supported samples differ.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14361>
Occlusion queries are supported always but only the number of
supported samples differ.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14361>
- gen4 - has dp4acc and dp2acc, dp4acc is used to implement
4x8 dot product.
- gen3 - has dp2acc, in OpenCL blob uses dp2acc for dot product
on both get3 and gen4.
- gen2 - unknown, lower everything.
- gen1 - no dp2acc, lower everything. OpenCL blob doesn't advertise
cl_qcom_dot_product8 but still generates code for it.
The assembly is more verbose and uses yet to be documented
mad32.u16 instruction.
Passes:
dEQP-VK.spirv_assembly.instruction.compute.opsdotkhr.*
dEQP-VK.spirv_assembly.instruction.compute.opudotkhr.*
dEQP-VK.spirv_assembly.instruction.compute.opsudotkhr.*
dEQP-VK.spirv_assembly.instruction.compute.opsdotaccsatkhr.*
dEQP-VK.spirv_assembly.instruction.compute.opudotaccsatkhr.*
dEQP-VK.spirv_assembly.instruction.compute.opsudotaccsatkhr.*
Only packed 4x8 unsigned and mixed versions are accelerated.
However in theory we should be able to do better for signed version
than current NIR lowering.
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13986>
Through their specific PIPE_CAP.
v2 (Iago)
- Add comment in test failure
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13409>
It was a bit trickier to RE, since blob doesn't expose this
functionality at all, however we had a clue from the very beginning:
lima_blend_factor is 3 bits, i.e. 8 values, but only 5 of them were
used, it just waited till someone tried what 3 unused values do.
Interestingly enough, it turns out "5" works just as "0" (which is
PIPE_BLENDFACTOR_*SRC_*), but only if output register for gl_FragColor
is $0, So it looks suspiciously similar with PIPE_BLENDFACTOR_*SRC1_*
behavior, and looks like secondary output is taken from $0.
Since output regs for all other outputs are configured via RSW, there
must be a field in RSW for output register for secondary color, it's
likely 4 bits and it's currently set to 0 for reg $0.
Then it was just a matter of brute-forcing various consecutive 4 bits
in RSW - and indeed, setting top 4 bits of rsw->aux0 to the index of
gl_FragColor output register fixes blending tests when we use "5"
blend factor instead of "0".
So it must be a register number for gl_SecondaryFragColor. Unlike
gl_FragColor, the field is only repeated once in RSW.
Wire it up in compiler, and piglit arb_blend_func_extended now passes.
Reviewed-by: Andreas Baierl <ichgeh@imkreisrum.de>
Reviewed-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13873>
We don't advertise bufferDeviceAddressCaptureReplay capability and
neither does blob, because at the moment there is no way to allocate
bo with predefined iova.
There is no support of any arithmetic with addresses since shaderInt64
is not enabled. However, we could enable int64 support whenever we want.
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8717>
By default line mode is VK_LINE_RASTERIZATION_MODE_RECTANGULAR_EXT,
when lineRasterizationMode is VK_LINE_RASTERIZATION_MODE_BRESENHAM_EXT
and primtype is line - we enable bresenham line mode.
We have to disable MSAA when bresenham lines are used, this is
a hardware limitation and spec allows it:
"When Bresenham lines are being rasterized, sample locations may
all be treated as being at the pixel center (this may affect
attribute and depth interpolation)."
This forces us to re-emit msaa state when line mode is changed.
Signed-off-by: Hyunjun Ko <zzoon@igalia.com>
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6020>
This is mostly a matter of auditing uses of
cmd->state.framebuffer and replacing every use of fb->attachments with
cmd->state.attachments. We already weren't using the attachments
anywhere outside of the render pass, so this is pretty straightforward.
We also don't have any use for anything in
VkFramebufferAttachmentImageInfo so we can just ignore it.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13228>
Below were missed in the last update:
VK_KHR_incremental_present
VK_KHR_swapchain_mutable_format
Signed-off-by: Yiwei Zhang <zzyiwei@chromium.org>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12980>
We disabled PIPE_CAP_PRIMITIVE_RESTART on ffc4d82438 ("v3d: Disable
PIPE_CAP_PRIMITIVE_RESTART") because the HW can only support
PIPE_CAP_PRIMITIVE_RESTART_FIXED_INDEX subset.
But the introduction of PIPE_CAP_EMULATE_NONFIXED_PRIMITIVE_RESTART
allows us to support these nonfixed primitive restarts so we can now
re-enable NV_primitive_restart for OpenGL extensions.
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12669>