On GLSL that info is set as a layout qualifier when redeclaring
gl_FragCoord, so somehow tied to a specific variable. But in practice,
they behave as a global of the shader. On ARB programs they are set
using a global OPTION (defined at ARB_fragment_coord_conventions), and
on SPIR-V using ExecutionModes, that are also not tied specifically to
the builtin.
This patch moves that info from nir variable and ir variable to nir
shader and gl_program shader_info respectively, so the map is more
similar to SPIR-V, and ARB programs, instead of more similar to GLSL.
FWIW, shader_info.fs already had pixel_center_integer, so this change
also removes some redundancy. Also, as struct gl_program also includes
a shader_info, we removed gl_program::OriginUpperLeft and
PixelCenterInteger, as it would be superfluous.
This change was needed because recently spirv_to_nir changed the order
in which execution modes and variables are handled, so the variables
didn't get the correct values. Now the info is set on the shader
itself, and we don't need to go back to the builtin variable to set
it.
Fixes: e68871f6a ("spirv: Handle constants and types before execution
modes")
v2: (Jason)
* glsl_to_nir: get the info before glsl_to_nir, while all the rest
of the info gathering is happening
* prog_to_nir: gather the info on a general info-gathering pass,
not on variable setup.
v3: (Jason)
* Squash with the patch that removes that info from ir variable
* anv: assert that OriginUpperLeft is true. It should be already
set by spirv_to_nir.
* blorp: set origin_upper_left on its core "compile fragment
shader", not just on some specific places (for this we added an
helper on a previous patch).
* prog_to_nir: no need to gather specifically this fragcoord modes
as the full gl_program shader_info is copied.
* spirv_to_nir: assert that we are a fragment shader when handling
this execution modes.
v4: (reported by failing gitlab pipeline #18750)
* state_tracker: update too due changes on ir.h/gl_program
v5:
* blorp: minor change after change on previous patch
* radeonsi: update due this change.
v6: (Timothy Arceri)
* prog_to_nir: remove extra whitespace
* shader_info: don't use :1 on origin_upper_left
* glsl: program.fs.origin_upper_left/pixel_center_integer can be
move out of the shader list loop
Eric and I would like a bitmask of which samplers are used, similar to
prog->SamplersUsed, but available in NIR. The linker uses SamplersUsed
for resource limit checking, but later optimizations may eliminate more
samplers. So instead of propagating it through, we gather a new one.
While there, we also gather the existing textures_used_by_txf bitmask.
Gathering these bitfields in nir_shader_gather_info is awkward at best.
The main reason is that it introduces an ordering dependency between the
two passes. If gathering runs before lower_samplers_as_deref, it can't
look at var->data.binding. If the driver doesn't use the full lowering
to texture_index/texture_array_size (like radeonsi), then the gathering
can't use those fields. Gathering might be run early /and/ late, first
to get varying info, and later to update it after variant lowering. At
this point, should gathering work on pre-lowered or post-lowered code?
Pre-lowered is also harder due to the presence of structure types.
Just doing the gathering when we do the lowering alleviates these
ordering problems. This fixes ordering issues in i965 and makes the
txf info gathering work for radeonsi (though they don't use it).
Reviewed-by: Eric Anholt <eric@anholt.net>
Ken's rework of mesa/st builtins to NIR means that we'll have more NIR
shaders with color output types that are mismatched with the render target
types. Since this is behavior that GLSL doesn't require, add it as a
shader_info option so the driver can know that it needs to ignore the FS
output's base type in favor of the actual render target's. This prevents
needing additional variants in several mesa/st paths (clear, pbo upload,
pbo download), given that the driver already has to handle the variants
for any TGSI being passed to it (from u_blitter, for example).
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
vtn supports these, so don't squalk if user is happy with enabling
these.
v2: add new members sorted
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Will be used to communicate that a shader uses 64-bit operations to the
concerned lowering passes.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Previously, we had two field in shader_info: double_inputs_read and
double_inputs. Presumably, the one was for all double inputs that are
read and the other is all that exist. However, because nir_gather_info
regenerates these two values, there is a possibility, if a variable gets
deleted, that the value of double_inputs could change over time. This
is a problem because double_inputs is used to remap the input locations
to a two-slot-per-dvec3/4 scheme for i965. If that mapping were to
change between glsl_to_nir and back-end state setup, we would fall over
when trying to map the NIR outputs back onto the GL location space.
This commit changes the way slot re-mapping works. Instead of the
double_inputs field in shader_info, it adds a DualSlotInputs bitfield to
gl_program. By having it in gl_program, we more easily guarantee that
NIR passes won't touch it after it's been set. It also makes more sense
to put it in a GL data structure since it's really a mapping from GL
slots to back-end and/or NIR slots and not really a NIR shader thing.
Tested-by: Alejandro Piñeiro <apinheiro@igalia.com> (ARB_gl_spirv tests)
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Allow the capability to be exposed, and convert the new execution mode
into fs state.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Capability that informs if atomic counters are supported. From SPIR-V
1.0 spec, section 3.7, "Storage Class", item 10 from table:
(Column "Storage Class"):
"AtomicCounter For holding atomic counters. Visible across all
functions of the current invocation. Atomic counter-specific
memory."
(Column "Required Capability"):
"AtomicStorage"
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
v2:
An attempt to support SpvExecutionModeStencilRefReplacingEXT's behavior
also follows, with the interpretation to said mode being we prevent
writes to the built-in FragStencilRefEXT variable when the execution
mode isn't set.
v3:
A more cautious reading of 1db44252d0 led
me to a missing change that would stop (what I later discovered were)
GPU hangs on the CTS test written to exercise this.
v4:
Turn FragStencilRefEXT decoration usage without StencilRefReplacingEXT
mode into a warning, instead of trying to make the variable read-only.
If we are to follow the originating extension on GL, the built-in
variable in question should never be readable anyway.
v5/v6: rebases.
v7:
Fix check for gen9 lost in rebase. (Ilia)
Reduce the scope of the bool used to track whether
SpvExecutionModeStencilRefReplacingEXT was used. Was in shader_info,
moved to vtn_builder. (Jason)
v8:
Assert for fragment shader handling StencilRefReplacingEXT execution
mode. (Caio)
Remove warning logic, since an entry point might not have
StencilRefReplacingEXT execution mode, but the global output variable
might still exist for another entry point in the module. (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This extension provides new GLSL built-in functions
beginInvocationInterlockARB() and endInvocationInterlockARB()
that delimit a critical section of fragment shader code. For
pairs of shader invocations with "overlapping" coverage in a
given pixel, the OpenGL implementation will guarantee that the
critical section of the fragment shader will be executed for
only one fragment at a time.
Signed-off-by: Plamena Manolova <plamena.manolova@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Co-authored-by: Daniel Schürmann <daniel.schuermann@campus.tu-berlin.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
So now, during spirv_to_nir, it uses the capability instead of the
extension. Note that we are really doing here is treating
SPV_AMD_gcn_shader as other supported extensions. SPV_AMD_gcn_shader
is not the first SPV extension supported. For example, the capability
draw_parameters infers if the extension SPV_KHR_shader_draw_parameters
is supported or not.
This could be seen as counter-intuitive, and that it would be easier
to define which extensions are supported, and based our checks on
that, but we need to take into account that some capabilities are
optional from core, and others came from new extensions.
Also this commit would make the implementation of ARB_spirv_extensions
easier.
v2: AMD_gcn_shader capability renamed to gcn_shader (Daniel Schürmann)
Reviewed-by: Daniel Schürmann <daniel.schuermann@campus.tu-berlin.de>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Co-authored-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Schürmann <daniel.schuermann@campus.tu-berlin.de>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This capability allows gl_ViewportIndex and gl_Layer to also be used
as outputs in Vertex and Tesselation shaders.
v2: Make conditional to the capability, add gl_Layer, add tesselation
shaders. (Iago)
v3: Don't export to tesselation control shader.
v4: Add Reviewd-by tag.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
First we move double_inputs_read into a vs struct in the union,
double_inputs_read is only used for vs inputs so this will
save space and also allows us to add a new double_inputs field.
We add the new field because c2acf97fcc changed the behaviour
of double_inputs_read, and while it's no longer used to track
actual reads in i965 we do still want to track this for gallium
drivers.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This will allow us to use the program serialization to implement
ARB_get_program_binary.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
To avoid any vulkan driver to include the GL mtypes.h. Renamed as
eventually this could be used by drivers not using nir.
v2: remove compiler/spirv/spirv.h from mtypes (Alejandro)
v3: added the definition at compiler/shader_info.h (Jason Ekstrand)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
i965 turns fddx/fddy into their coarse/fine variants based on the
ctx->Hint.FragmentShaderDerivative setting. It needs to know whether
this can impact a shader in order to better guess NOS settings.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
I'd like to put this sort of metadata in the shader_info structure,
rather than adding more things to gl_program.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Annoyingly, SPIR-V lets you specify all of these fields in either the
TCS or TES, which means that we need to be able to store all of them
for either shader stage. Putting them in a union won't work.
Combining both is an easy solution, and given that the TCS struct only
had a single field, it's pretty inexpensive.
This patch renames the combined struct to "tess" to indicate that it's
for tessellation in general, not one of the two stages.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
It feels weird using GL_* enums in a Vulkan driver.
v2: Fix the TESS_SPACING -> PIPE_TESS_SPACING conversion.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The vertex order is either clockwise or counterclockwise. We can just
store a "ccw" boolean rather than GLenum values. I don't want to use
GLenums in a Vulkan driver, and even in GL a simple boolean works fine.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This will be used in api_validate.c in a following patch when we
switch to using gl_program pointers for the pipelines CurrentProgram
array.
Reviewed-by: Eric Anholt <eric@anholt.net>
This will allow us to simplify the current program logic for SSO.
Also since we aim to detach shader_info from nir_shader this will come
in handy avoiding passing nir_shader around just to keep track of
the stage we are dealing with.
V2: set stage for arb asm programs also.
Reviewed-by: Eric Anholt <eric@anholt.net>
This extension allows the fragment shader to control whether values in
gl_SampleMaskIn[] reflect the coverage after application of the early
depth and stencil tests.
Signed-off-by: Plamena Manolova <plamena.manolova@intel.com>
Reviewed-by: Chris Forbes <chrisforbes@google.com>
We switched from a boolean to array lengths in gl_program a while back.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Alejandro Piñeiro
Kenneth Graunke
Eric Anholt
Jason Ekstrand
Rob Clark
Matt Turner
Samuel Pitoiset
Ilia Mirkin
Jose Maria Casanova Crespo
Gustavo Lima Chaves
Plamena Manolova
Iago Toral Quiroga
Bas Nieuwenhuizen
Timothy Arceri
Dave Airlie
Daniel Schürmann
Caio Marcelo de Oliveira Filho
Jordan Justen
Timothy Arceri
Lionel Landwerlin