v2: Rebase on 272e927d0e ("nir/spirv: initial handling of OpenCL.std
extension opcodes")
v3: Add a new lower_usub_sat64 flag that only applies to the 64-bit
version of the nir_op_usub_sat instruction.
v4: Also enable the lowering when nir_lower_iadd64 is set.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com> [v3]
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/767>
v2: Rebase on 272e927d0e ("nir/spirv: initial handling of OpenCL.std
extension opcodes")
v3: Add a new lower_hadd64 flag that only applies to the 64-bit versions
of the instructions.
v4: Also enable the lowering when nir_lower_iadd64 is set.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com> [v3]
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/767>
uctz isn't added because it will implemented in the GLSL path and the
SPIR-V path using other pre-existing instructions.
v2: Avoid signed integer overflow for uabs_isub(0, INT_MIN). Noticed by
Caio.
v3: Alternate fix for signed integer overflow for abs_sub(0, INT_MIN).
I tried the previous methon in a small test program with -ftrapv, and it
failed.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com> [v1]
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/767>
v2: Re-write iadd64_saturate and isub64_saturate to avoid undefined
overflow behavior. Also fix copy-and-paste bug in isub64_saturate.
Suggested by Caio.
v3: Avoid signed integer overflow for abs_sub(0, INT_MIN). Noticed by
Caio.
v4: Alternate fix for signed integer overflow for abs_sub(0, INT_MIN).
I tried the previous methon in a small test program with -ftrapv, and it
failed.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/767>
Gen4/5's rounding instructions operate differently than later Gens'.
They all return the floor of the input and the "Round-increment"
conditional modifier answers whether the result should be incremented by
1.0 to get the appropriate result for the operation (and thus its
behavior is determined by the round opcode; e.g., RNDZ vs RNDE).
Since this requires a second instruciton (a predicated ADD) that
consumes the result of the round instruction, the round instruction
cannot write its result directly to the (write-only) message registers.
By emitting the ADD in the generator, the backend thinks it's safe to
store the round's result directly to the message register file.
To avoid this, we move the emission of the ADD instruction to the NIR
translator so that the backend has the information it needs.
I suspect this also fixes code generated for RNDZ.SAT but since
Gen4/5 don't support GLSL 1.30 which adds the trunc() function, I
couldn't write a piglit test to confirm. My thinking is that if x=-0.5:
sat(trunc(-0.5)) = 0.0
But on Gen4/5 where sat(trunc(x)) is implemented as
rndz.r.f0 result, x // result = floor(x)
// set f0 if increment needed
(+f0) add result, result, 1.0 // fixup so result = trunc(x)
then putting saturate on both instructions will give the wrong result.
floor(-0.5) = -1.0
sat(floor(-0.5)) = 0.0
// +1 increment would be needed since floor(-0.5) != trunc(-0.5)
sat(sat(floor(-0.5)) + 1.0) = 1.0
Fixes: 6f394343b1 ("nir/algebraic: i2f(f2i()) -> trunc()")
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2355
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3459>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3459>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
[Eric: factor out the is_dir_or_link() check and fix a bug in v1]
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
v3: include directory path when lstat'ing files
v4: fix inverted check in enumerate_sysfs_metrics()
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2258>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2258>
A user came to me asking how to fix this error, but it's entirely
expected that `get_wl_surface_proxy()` on recent enough wayland
compositors will always print it.
Let's just remove the message altogether, it is basically never useful.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3219>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3219>
The 64 bit converter cases were missing, add them now.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3478>
Branch instructions should not be treated as regular ALUs.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3478>
Those size conversion operations work the same way apart from f2f
using an fmov op code and u2u using an imov. Let's handle them in the
same case block to avoid code duplication.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3478>
mir_constant_float() assumes we're dealing with 32-bit integers/floats,
which is only the case if reg_mode is equal to midgard_reg_mode_32.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3478>
Right now, constant combining is not supported in 16 bit mode, and 64
bit mode is simply ignored. Let's rework the function to make it
type/bit-size agnostic.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3478>
Each instruction bundle can contain up to 16 constant bytes. The meaning
of those byte is instruction dependent: it depends on the instruction
native type (int, uint or float) and the instruction reg_mode (8, 16, 32
or 64 bit). Those different layouts can be exposed as a union to
facilitate constants manipulation.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3478>
As a result of 9baa33cef0 our backend compiler leaves params pretty
much untouched. So in order to avoid storing uninitialized values in
the shader cache blobs, just 0 out this array.
I've considered not even allocating this array which works on gen8+
but the vec4 backend still makes a copy of this array and so it
crashes on memcpy on HSW.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 9baa33cef0 ("anv: Rework push constant handling")
Reported-by: Tapani Pälli <tapani.palli@intel.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Tapani Pälli <tapani.palli@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3516>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3516>
On platforms without mincore(), _eglPointerIsDereferencable()
currently just checks whether p != NULL. This is not sufficient:
In the Wayland platform code (i.e., in get_wl_surface_proxy()),
_eglPointerIsDereferencable() is called on the version field
of `struct wl_egl_window` which is 3 on current versions of
Wayland. This causes a segfault when trying to dereference p.
Fix this behavior by assuming that the first page of the
process is never dereferencable.
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3103>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3103>
GCC does not understand how aco_span works.
This patch fixes it by casting the aco_span's this pointer
to uintptr_t rather than to a char pointer, effectively
telling GCC not to try to figure it out.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3483>
turnip can have multiple inputs with the same location, and different
location_frac.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3109>