Since we aren't going to put the function parameters or the return variable
in the list of locals, it won't get a proper declaration. This changes
nir_print to print the type along with each parameter or return variable.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Otherwise, we have a problem when we go to print functions with arguments
because their names get added to the hash table during declaration which
happens after we print the prototype.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
NIR has never been used on IR where we haven't already done function
inlining so this code has been dead from the beginning. Let's just get rid
of it for now. We can always put it back in if we decide to use NIR for
function inlining at some point in the future.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This new pass lowers load/store_var intrinsics that act on indirect derefs
to if-ladder of direct load/store_var intrinsics. The if-ladders perform a
simple binary search on the indirect.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
No shader-db changes, but does recognize some extract_u16 which enables
the next patch to optimize some code.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Two shaders that appear in Unigine benchmarks (Heaven and Valley) unpack
three bytes from an integer and convert each into a float:
float((val >> 16u) & 0xffu)
float((val >> 8u) & 0xffu)
float((val >> 0u) & 0xffu)
Instead of shifting, masking, and type converting like this:
shr(8) g15<1>UD g25<8,8,1>UD 0x00000010UD
and(8) g16<1>UD g15<8,8,1>UD 0x000000ffUD
mov(8) g17<1>F g16<8,8,1>UD
shr(8) g18<1>UD g25<8,8,1>UD 0x00000008UD
and(8) g19<1>UD g18<8,8,1>UD 0x000000ffUD
mov(8) g20<1>F g19<8,8,1>UD
and(8) g21<1>UD g25<8,8,1>UD 0x000000ffUD
mov(8) g22<1>F g21<8,8,1>UD
i965 can simply extract a byte and convert to float in a single
instruction:
mov(8) g17<1>F g25.2<32,8,4>UB
mov(8) g20<1>F g25.1<32,8,4>UB
mov(8) g22<1>F g25.0<32,8,4>UB
This patch implements the first step: recognizing byte extraction. A
later patch will optimize out the conversion to float.
instructions in affected programs: 28568 -> 27450 (-3.91%)
helped: 7
cycles in affected programs: 210076 -> 203144 (-3.30%)
helped: 7
This patch decreases the number of instructions in the two Unigine
programs by:
#1721: 4520 -> 4374 instructions (-3.23%)
#1706: 3752 -> 3582 instructions (-4.53%)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Unfortunately, glslang gives us cull/clip distance and GS streams even if
the shader doesn't use it whenever a shader is declared as version 450.
This is a glslang bug, but we can easily enough ignore it for now.
"Result is the same as computing the sum of the absolute values of
OpDPdx and OpDPdy on P."
We were doing sum of absolute values of OpDPdx of P and OpDPdx of NULL.
These were originally added to reduce compiler warnings but aren't really
needed. Getting rid of them reduces the diff between the Vulkan branch and
master, so we might as well.
When NIR was originally drafted, there was no easy way to determine if
something was constant or not. The result was that we had lots of
special-casing for constant values such as this. Now that load_const
instructions are SSA-only, it's really easy to find constants and this
isn't really needed anymore.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Rob Clark <robclark@gmail.com>
This fixes two issues. First, we had a use-after-free in the case where
the instruction got deleted and we tried to return mov->dest.write_mask.
Second, in the case where we are doing a self-mov of a register, we delete
those channels that are moved to themselves from the write-mask. This
means that those channels aren't reported as being handled even though they
are. We now stash off the write-mask before remove unneeded channels so
that they still get reported as handled.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94073
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
The sub-determinate implementation pattern fixed by
6a7e2904e0 has a second instance in the
same file.
With the previous algorithm, when row and j are both 3, the index
overruns the array. This only impacts the stack on 32 bit builds.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
This commit adds the capability to NIR to support separate textures and
samplers. As it currently stands, glsl_to_nir only sets the texture deref
and leaves the sampler deref alone as it did before and nir_lower_samplers
assumes this. Backends can still assume that they are combined and only
look at only at the texture index. Or, if they wish, they can assume that
they are separate because nir_lower_samplers, tgsi_to_nir, and prog_to_nir
all set both texture and sampler index whenever a sampler is required (the
two indices are the same in this case).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We're about to separate the two concepts. When we do, the sampler will
become optional. Doing a rename first makes the separation a bit more
safe because drivers that depend on GLSL or TGSI behaviour will be fine to
just use the texture index all the time.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Direct access to intr->const_index[n], where different slots have
different meanings, is somewhat confusing.
Instead, let's put some extra info in nir_intrinsic_infos[] about which
slots map to what, and add some get/set helpers. The helpers validate
that the field being accessed (base/writemask/etc) is applicable for the
intrinsic opc, for some extra safety. And nir_print can use this to
dump out decoded const_index fields.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Previously, in order to get things working, we just always shadowed
variables. Now, we rewrite derefs whenever it's safe to do so and only
shadow if we have an in or out variable that we write or read to
respectively.
These are used in GLSL IR to removed unused varyings and match
transform feedback variables. There is no need to use these in NIR.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Helps 11 shaders in UnrealEngine4 demos.
I seriously hope they would have given us bitfieldReverse() if we
exposed GL 4.0 (but we do expose ARB_gpu_shader5, so why not use that
anyway?).
instructions in affected programs: 4875 -> 4633 (-4.96%)
cycles in affected programs: 270516 -> 244516 (-9.61%)
I suspect there's a *lot* of room to improve nir_search/opt_algebraic's
handling of this. We'd actually like to match, e.g., step2 by matching
step1 once and then doing a pointer comparison for the second instance
of step1, but unfortunately we generate an enormous tuple for instead.
The .text size increases by 6.5% and the .data by 17.5%.
text data bss dec hex filename
22957 45224 0 68181 10a55 nir_libnir_la-nir_opt_algebraic.o
24461 53160 0 77621 12f35 nir_libnir_la-nir_opt_algebraic.o
I'd be happy to remove this if Unreal4 uses bitfieldReverse() if it is
in a GL 4.0 context once we expose GL 4.0.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
The next patch adds an algebraic rule that uses the constant 0xff00ff00.
Without this change, the build fails with
return hex(struct.unpack('I', struct.pack('i', self.value))[0])
struct.error: 'i' format requires -2147483648 <= number <= 2147483647
The hex() function handles integers of any size, and assigning a
negative value to an unsigned does what we want in C. The pack/unpack is
unnecessary (and as we see, buggy).
Reviewed-by: Dylan Baker <baker.dylan.c@gmail.com>
Walking the SSA definitions in order means that we consider the smallest
algebraic optimizations before larger optimizations. So if a smaller
rule is part of a larger rule, the smaller one will happen first,
preventing the larger one from happening.
instructions in affected programs: 32721 -> 32611 (-0.34%)
helped: 106
In programs whose nir_optimize loop count changes (129 of them):
before: 1164 optimization loops
after: 1071 optimization loops
Of the 129 affected, 16 programs' optimization loop counts increased.
Prevents regressions and annoyances in the next commits.
Reviewed-by: Eduardo Lima Mitev <elima@igalia.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Parameterize build_asin() on the fit coefficients so the
implementation can be shared while still using different polynomials
for asin and acos. Also switch back to implementing acos in terms of
asin -- The improvement obtained from cancelling out the pi/2 terms
was negligible compared to the approximation error.
vtn_handle_type() creates a signed type regardless of the value of the
signedness flag, which usually doesn't make much of a difference
except when the type is used as base sampled type of an image type,
what will cause the base type of the NIR image variable to be
inconsistent with its format and cause an assertion failure in the
back-end (most likely only reproducible on Gen7), and may change the
semantics of the image intrinsic subtly (e.g. UMIN may become IMIN).
Jason Ekstrand
Matt Turner
Kristian Høgsberg Kristensen
Mark Janes
Rob Clark
Timothy Arceri
Francisco Jerez
Emil Velikov