Currently, the screen tracks all resources for all contexts, but this
is not correct. Each context should track the resources it uses. This
also allows a context to detect whether a resource is used by another
context and to notify another context using a resource that the current
context is done using the resource.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Guido Günther <guido.gunther@puri.sm>
Cc: Lucas Stach <l.stach@pengutronix.de>
Some hardware has a bug with triangle strips and it is signalled by the
flag BUG_FIXED8 whether this bug has been fixed. So only enable triangle
strips when this flag is set.
Thanks: Jonathan Marek and Christian Gmeiner for the pointers
v2: Add TODO to indicate that the handling should be refined
(Jonathan & Christian)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Only invert front facing when glFrontFace is GL_CW.
Fixes following deqp test:
dEQP-GLES2.functional.shaders.builtin_variable.frontfacing
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Update to etna_viv commit c51353e.
Signed-off-by: Christian GMEINER <christian.GMEINER@bachmann.info>
Reviewed-by: Philipp Zabel <philipp.zabel@gmail.com>
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
The flush callback may be called on the same pipe context, and thus
the same stream, from two different threads of execution. However,
etna_cmd_stream_flush{,2}() must not be called on the same stream
from two different threads of execution as that would mess up the
etna_bo refcounting and likely have other ugly side effects.
Fix this by using a reentrant screen lock around the flush callback.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Newer GPUs use the half float ALPHA_COLOR_EXT register.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
GC7000L has a TS mode with larger tiles, which improves performance.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Two driver files had tabs mixed with spaces. Remove the tabs.
Signed-off-by: Guido Günther <guido.gunther@puri.sm>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
A pipe_resource can be shared by all the pipe_context's hanging off the
same pipe_screen.
Changes from v2 -> v3:
- add locking with mtx_*() to resource and screen (Marek)
Changes from v3 -> v4:
- drop rsc->lock, just use screen->lock for the entire serialization (Marek)
- simplify etna_resource_used() flush condition, which also prevents
potentially flushing resources twice (Marek)
- don't remove resouces from screen->used_resources in
etna_cmd_stream_reset_notify(), they may still be used in other
contexts and may need flushing there later on (Marek)
Changes from v4 -> v5:
- Fix coding style issues reported by Guido
Changes from v5 -> v6:
- Add missing locking in etna_transfer_map(..) (Boris)
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Boris Brezillon <boris.brezillon@collabora.com>
We were leaking surfaces because the references taken in
etna_set_framebuffer_state weren't being released on context destroy.
Instead of just directly releasing those references in
etna_context_destroy, use the util_copy_framebuffer_state helper.
Take the chance to remove the duplicated buffer references in
compiled_framebuffer_state to avoid confusion.
The leak can be reproduced with a client that continuously creates and
destroys contexts.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reported-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
There is no need to do the detour over the resource behind the
surface to get the format. Use the surface format directly.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
At least GC2000 seems to push some dirt from the PE color cache into
the last bound render target when drawing depth only. Newer cores
seem to behave properly and don't do this, but I have found no way
to fix it on GC2000. Flushes and stalls don't seem to make any
difference.
In order to stop the core from pushing the dirt into a precious real
render target, plug in dummy buffer when rendering without a color
buffer.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Need this to efficiently emit texture descriptor invalidations.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Update context reset for HALTI3..HALTI5, sorting states for the HALTI
version that has them.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Add an implemenation of key clear_blit functions using the BLT engine
that replaced the RS on GC7000.
Also set level->size correctly for imported resources. This is important
for the BLT resolve-in-place path to work for them.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
The blob does this, as DRAW_INSTANCED can replace fully all the other
draw commands. It is also required to handle integer vertex formats.
The other path is only there for compatibility and might go away (or at
least rot to become buggy due to dis-use) in newer hardware.
As a by-effect this changes the behavior for GC3000-, by no longer using
the index offset for DRAW_INDEXED but instead adding it to INDEX_ADDR.
This should make no difference.
Preparation for GC7000 support.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
No hardware query is supported yet.
v1 -> v2
- removed query_type from strcut etna_hw_sample_provider
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Wladimir J. van der Laan <laanwj@gmail.com>
Set up new states that the blob started setting for GC3000 consistently.
This makes sure that when another test or driver leaves the GPU in
unpredictable state, these states are set up correctly for our
rendering.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Setting PA_VIEWPORT_UNK state correctly is necessary to make point sprite
rendering on GC3000 work.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
A dangling bo object would result in memory corruption while loading a
level in ioquake3_opengl2.
Fixes: 330d0607ed (gallium: remove pipe_index_buffer and set_index_buffer)
Suggested-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
If info->index_size is zero, info->index will point to uninitialized
memory.
Fatal signal 11 (SIGSEGV), code 2, fault addr 0xab5d07a3 in tid 20456 (surfaceflinger)
lst: Remove useless indexbuf conditional in the index_size != 0 case.
Fixes: 330d0607ed ("gallium: remove pipe_index_buffer and set_index_buffer")
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
pipe_draw_info::indexed is replaced with index_size. index_size == 0 means
non-indexed.
Instead of pipe_index_buffer::offset, pipe_draw_info::start is used.
For indexed indirect draws, pipe_draw_info::start is added to the indirect
start. This is the only case when "start" affects indirect draws.
pipe_draw_info::index is a union. Use either index::resource or
index::user depending on the value of pipe_draw_info::has_user_indices.
v2: fixes for nine, svga
Most drivers don't need it and shouldn't need it because it can't be used
in some cases (indirect draws, primitive restart, count from streamout).
Reviewed-by: Brian Paul <brianp@vmware.com>
This adds native fence fd support to etnaviv, similarly to commit
0b98e84e9b ("freedreno: native fence fd"), enabled for kernel
driver version 1.1 or later.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
This patch adds support for the SINGLE_BUFFER feature on GC3000
GPUs, which allows rendering to a single buffer using multiple pixel
pipes.
This feature is always used when it is available, which means that
multi-tiled formats are no longer being used in that case, and all
buffers will be normal (super)tiled. This mimics the behavior of the
blob on GC3000.
- Because the same format can be used to render to and texture from,
this avoids an extra resolve pass when rendering to texture.
- i.MX6qp includes a PRE which can scan-out directly from tiled formats,
avoiding untiling overhead.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
If we render to rb swapped format we will create a shader variant doing
the involved swizzing in the pixel shader.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
In case ctx->stream == NULL the fail label gets executed where
pctx gets dereferenced - too bad pctx is NULL in that case.
Caught by Coverity, reported to me by imirkin.
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Notes:
- make sure the default size is large enough to handle all state trackers
- pipe wrappers don't receive transfer calls from stream_uploader, because
pipe_context::stream_uploader points directly to the underlying driver's
stream_uploader (to keep it simple for now)
v2: add error handling to nv50, nvc0, noop
v3: set const_uploader
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Tested-by: Edmondo Tommasina <edmondo.tommasina@gmail.com> (v1)
Tested-by: Charmaine Lee <charmainel@vmware.com>
This driver supports a wide range of Vivante IP cores like GC880,
GC1000, GC2000 and GC3000.
Changes from V1 -> V2:
- added missing files to actually integrate the driver into build system.
- adapted driver to new renderonly API
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Marek Vasut
Jonathan Marek
Gert Wollny
Christian Gmeiner
Christian GMEINER
Guido Günther
Tomeu Vizoso
Lucas Stach
Wladimir J. van der Laan
Marek Olšák
Philipp Zabel
The etnaviv authors