Bit 0 enables VSRC0 (R in low bits, G high) and bit 2 enables
VSRC1 (B in low bits, A high).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
If the api version is too low, the loader clamps the application
requested version to the advertized version, which messes with
which extensions are enabled.
Reviewed-by: Dave Airlie <airlied@redhat.com>
If the previously seen instruction generates more fields than the new
instruction, still allow CSE to happen. This doesn't do much, but it
also enables a couple more shaders in the next patch. It helped quite a
bit in another change series that I have (at least for now) abandoned.
v2: Add some extra comentary about the parameters to instructions_match.
Suggested by Ken.
No changes on Skylake, Broadwell, Iron Lake or GM45.
Ivy Bridge and Haswell had similar results. (Ivy Bridge shown)
total instructions in shared programs: 11780295 -> 11780294 (<.01%)
instructions in affected programs: 302 -> 301 (-0.33%)
helped: 1
HURT: 0
total cycles in shared programs: 257308315 -> 257308313 (<.01%)
cycles in affected programs: 2074 -> 2072 (-0.10%)
helped: 1
HURT: 0
Sandy Bridge
total instructions in shared programs: 10506687 -> 10506686 (<.01%)
instructions in affected programs: 335 -> 334 (-0.30%)
helped: 1
HURT: 0
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
v2 (idr): Don't allow CSEL with a non-float src2.
v3 (idr): Add CSEL to fs_inst::flags_written. Suggested by Matt.
v4 (idr): Only set BRW_ALIGN_16 on Gen < 10 (suggested by Matt). Don't
reset the access mode afterwards (suggested by Samuel and Matt). Add
support for CSEL not modifying the flags to more places (requested by
Matt).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> [v3]
Reviewed-by: Matt Turner <mattst88@gmail.com>
Do this in one place outside the only caller of the accumulation
function.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This will be reused later.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We already have the same function in brw_queryobj.c
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We want to reuse it later on.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Just some extra safety before further changes.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This is only required with the latest libdrm.
This fixes 32-bit support with high addresses.
(and possibly 64-bit support too because the high bits need to be masked out)
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Cc: 17.3 18.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This enables AMD_performance_monitor extension.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
It should be possible to build EGL without GLX, but the meson build
currently doesn't allow that because it too tightly couples glx and dri.
This patch eases dri and glx apart, so that EGL without GLX can be
built.
CC: Daniel Stone <daniels@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
The meson build file for Apple GLX is not listed in the EXTRA_DIST make
variable and therefore isn't shipped as part of the release tarball, so
meson builds from the tarball will fail.
Add the file to EXTRA_DIST to ensure it is included in the tarball.
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Null exports should only be needed when no other exports are
emitted. This removes a bunch of 'exp null off, off, off, off done vm'.
Affected games are Dota 2 and Wolfenstein 2, not sure if that
really helps, but code size is decreasing there.
Polaris10:
Totals from affected shaders:
SGPRS: 8216 -> 8216 (0.00 %)
VGPRS: 7072 -> 7072 (0.00 %)
Spilled SGPRs: 0 -> 0 (0.00 %)
Spilled VGPRs: 0 -> 0 (0.00 %)
Code Size: 454968 -> 453896 (-0.24 %) bytes
Max Waves: 772 -> 772 (0.00 %)
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
With this extension enabled and a server GLX implementation that actually
honors it, Window movement lags considerably on gnome-shell/vmware, so
disable it by default.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
This option is disabled by default. Primarily intended for drivers on
virtual hardware.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Drivers on virtual hardware don't want to expose this extension to
GLX compositors, similarly to GLX_OML_sync_control, since that significantly
increases latency.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
These helpers insert the basic block in the same order as they
appear in NIR making it easier to follow LLVM IR dumps. The helpers
also insert more useful labels onto the blocks.
TGSI use the line number of the corresponding opcode in the TGSI
dump as the label id, here we use the corresponding block index
from NIR.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Co-authored-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Schürmann <daniel.schuermann@campus.tu-berlin.de>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Co-authored-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Schürmann <daniel.schuermann@campus.tu-berlin.de>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This re-adds the auto option for omx, without it we default to tizonia
and the build fails almost immediately, this is especially obnoxious
those building a driver that doesn't support the OMX state tracker to
begin with.
v2: - Only define OMX_FOO for auto cases if the dependencies are found.
This fixes building tizonia with auto (Julien, Eric)
CC: Gurkirpal Singh <gurkirpal204@gmail.com>
Fixes: bb5e27fab6
("st/omx/bellagio: Rename st and target directories")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Jon Turney <jon.turney@dronecode.org.uk> (v1)
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Tested-by: Julien Isorce <julien.isorce@gmail.com>
Tested-by: Karol Herbst <kherbst@redhat.com> (v1)
It needs to have src/egl in it's includes as well.
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Tested-by: Julien Isorce <julien.isorce@gmail.com>
Tested-by: Karol Herbst <kherbst@redhat.com>
This is needed later since tizonia requires dri
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Tested-by: Julien Isorce <julien.isorce@gmail.com>
Tested-by: Karol Herbst <kherbst@redhat.com>
In contrast to non-aa, where stippling is based on either dx or dy
(depending on if it's a x or y major line), stippling is based on
actual distance with smooth lines, so adjust for this.
(It looks like there's some minor artifacts with mesa demos
line-sample and stippling, it looks like the line endpoints
aren't quite right with aa + stippling - maybe due to the
integer math in the stipple stage, but I can't quite pinpoint it.)
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
The motivation actually was to get rid of the additional tex
instruction, since that requires the draw fallback code to intercept
all sampler / view calls (even if the fallback is never hit).
Basically, the idea is to use coverage of the pixel to calculate
the alpha value, and coverage is simply based on the distance
to the center of the line (in both line direction, which is useful
for wide lines, as well as perpendicular to the line).
This is much closer to what hw supporting this natively actually does.
It also fixes an issue with line width not quite being correct, as
well as endpoints getting stretched too far (in line direction) with
wide lines, which is apparent with mesa demo line-sample.
(For llvmpipe, it would probably make sense to do something like this
directly when drawing lines, since rendering two tris is twice as
expensive as a line, but it would need some changes with state
management.)
Since we're no longer relying on mipmapping to get the alpha value,
we also don't need to draw 3 rects (6 tris), one is sufficient.
There's still issues (as before):
- quite sure it's not correct without half_pixel_center, but can't test
this with GL.
- aaline + line stipple is incorrect (evident with line-sample demo).
Looking at the spec the stipple pattern should actually be based on
distance (not just dx or dy for x/y major lines as without aa).
- outputs (other than pos + the one used for line aa) should be
reinterpolated since we actually increase line length by half a pixel
(but there's no tests which would care).
v2: simplify the math (should be equivalent), don't need immediate
v3: use float versions of atan2,cos,sin, minor cleanups
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Bas Nieuwenhuizen
Samuel Pitoiset
Ian Romanick
Kenneth Graunke
Lionel Landwerlin
Marek Olšák
Christian Gmeiner
Dylan Baker
Thierry Reding
Eric Engestrom
Thomas Hellstrom
Timothy Arceri
Daniel Schürmann
Roland Scheidegger