Run part of the VK CTS in 3 devices with Stoney Ridge graphics.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com>
Reviewed-by: Corentin Noël <corentin.noel@collabora.com>
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10853>
This covers dEQP-EGL, GL, and GLES on GLK, APL (BXT), and AML-Y
Chromebooks. The GLES tests are fractional runs on some boards to keep
the pipeline time down. Flakes are reported to #intel-ci on freenode.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10438>
Without a way to exclude specific subdirectories, keeping the list
of all subdirectories which need to be tested is error prone.
It's better to run CI slightly more often than to miss it when
it is needed.
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9609>
As Windows now builds llvmpipe and lavapipe, we should be sure to run
their builds when these change.
Acked-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9518>
This means less custom test-source-dep stuff for these drivers, though it
means that touching the CI expects files will cause a bit more retesting:
- broadcom drivers retest as a group (but Igalia requested that
organization of CI files)
- radv+radeonsi retest as a group
- lvp+llvmpipe retest as a group
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9161>
This add support for the Intel Apollo Lake and Gemini Lake families,
however the job will be disabled by default unless the developer
manually hit play for the iris-apl-traces and iris-glk-traces jobs in
GitLab CI.
These devices are still under experimental level support in
the Lava lab and are not guaranteed to work reliably yet. Once they
become reliable and more resilient we will enable them by default in
MesaCI.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8162>
Add OpenGL and Vulkan testing for V3D and V3DV respectively.
Add also a couple of manual piglit jobs for V3D.
v2:
- Replace custom mustpass with running fraction of tests (Eric)
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8745>
It's failed for almost a month, so right now it's mostly noise and a
waste of CI resources.
It can easily be re-enabled by an MR which makes it pass again.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8976>
This way, when such a file is modified only the affected driver gets
tested.
It also helps to declutter the .gitlab-ci directory.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8757>
Split the rule to avoid running useless tests when touching the driver specific
sources.
v2: removed src/mesa/drivers/x11/**/*
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Eric Anholt <eric@anholt.net> (v2)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8735>
It fits better with what other drivers has done.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Acked-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8702>
The lack of this broke scheduled pipelines, because they attempted
to create a meson-windows-vs2019 job, which couldn't work (because the
windows_build_vs2019 job doesn't exist in scheduled pipelines).
Fixes: 84c8a35aa2 "CI: Add Windows source dependency map"
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8360>
Now that we've soaked the Windows build in and it's working well,
restrict it to only running on given pipelines, albeit in a somewhat
surprising way.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8053>
This tests OpenGL ES 2.0 CTS suite with VC4 drivers, through baremetal
Raspberry Pi 3 devices.
The devices are connected to a switch that supports Power over Ethernet
(PoE), so the devices can be started/stopped through the switch, and
also to a host that runs the GitLab runner through serial-to-USB cables,
to monitor the devices to know when the testing finishes.
The Raspberries uses a network boot, using NFS and TFTP. For the root
filesystem, they use the one created in the armhf container. For the
kernel/modules case, this is handled externally. Currently it is using
the same kernel/modules that come with the Raspberry Pi OS. In future we
could build them in the same armhf container.
At this moment we only test armhf architecture, as this is the default
one suggested by the Raspberry Pi Foundation. In future we could also
add testing for arm64 architecture.
Finally, for the very rare ocassions where the Raspberry Pi 3 device is
booted but no data is received, it retries the testing for a second
time, powering off and on the device in the process.
v2:
- Remove commit that exists capture devcoredump (Eric)
- Squash remaining commits in one (Andres)
v3:
- Add missing boot timeout check (Juan)
v4:
- Use locks when running the PoE on/off script (Eric)
- Use a timeout for serial read (Eric)
v5:
- Rename stage to "raspberrypi" (Eric)
- Bump up arm64_test tag (Eric)
v6:
- Make serial buffer timeout optional (Juan)
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7628>
This is now called 'arm'; even though they're two separate drivers, it
does help cut down on some of the more egregious horizontal scrolling.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7873>
This is now called 'layered-backends'.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7873>
This is now called 'amd'.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7873>
This is now called 'software-renderer'.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7873>
src/amd/vulkan is specific to RADV and shouldn't trigger RadeonSI CI.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6839>
For testing Mesa on LAVA devices with the amd64 architecture, build
kernels and rootfs in the same way as we do for arm64 and armhf.
Also add a few trivial jobs for a specific AMD Chromebook.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5903>
This also tunes `.freedreno-rules` a bit so that it isn't triggered by
various tools that don't effect the driver build.
The .gitlab-ci directory is kept separate from the toplevel one so that
updates to (for example) reference decode output do not trigger all the
other-driver jobs to run.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6070>
Currently, scheduled pipelines are only used to rebuild
the git-cache archive daily. There is no point in rebuilding
eveything, so ensure that any normal jobs are removed from
the scheduled pipelines.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5804>
Add virglrenderer to the container and use the vtest transport to test
the Gallium driver. On the "host", llvmpipe is used.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4433>
For now tests only use these drivers:
* llvmpipe
* softpipe
* freedreno
* lima
* etnaviv
* panfrost
So using rules:changes gitlab feature to run the tests when the changes
made are potentially affecting these drivers.
A few notes:
* the following code:
.piglit-test:
extends:
- .test-gl
- .llvmpipe-rules
makes gitlab replace .test-gl "rules:changes" values by the one from
".llvmpipe-rules".
* rules:changes always matches for non-MR new branches so jobs will always be
created (and they'll be run if their dependencies are run). For pushes to
existing branches the files changed by the push are used to match the
rules:changes path.
* the same gitlab feature could be used for some build jobs
Acked-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2569>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2569>