Commit Graph

22 Commits

Author SHA1 Message Date
redfish e374ae7eeb cmake: option+target for profiling for coverage 2016-09-01 10:47:43 -04:00
NanoAkron cf10e05cc6 Add ARMv8 Handling to CMakeLists.txt - version 2
Adds 64-bit ARMv8 handling to CMakeLists.txt and implements GCC flags for two errata on the Cortex-A53 present on every chip in revision 0:

https://developer.arm.com/docs/epm048406/latest/arm-processor-cortex-a53-mpcore-product-revision-r0-software-developers-errata-notice

835769 affects 64-bit multiply accumulate

843419 affects internal page addressing

Rewritten to build on @radfish's changes

Updated to address @radfish's points
2016-08-30 00:57:55 +01:00
Riccardo Spagni 53a0997a26
Merge pull request #997
1c7d3b0 cmake: define ARM var for all ARM arch variants (redfish)
6fe543d cmake: ARM: exclude libunwind in static build (redfish)
397b720 make: remove NO_AES from arm targets (redfish)
57ca3f3 make: make the ARM release targets statically linked (redfish)
43c07a1 readme: editted install/build instructions for clarity (redfish)
a0d4058 Revert "makefile: remove unnecessary ARM-specific targets" (redfish)
c2bc34b Revert "Interpret x86_64 as x86-64 for architecture" (redfish)
c54b9a1 cmake: don't set ARCH from CMAKE_SYSTEM_PROCESSOR (redfish)
2016-08-28 22:49:09 +02:00
redfish 397b720069 make: remove NO_AES from arm targets
cmake sets that appropriately based on the target architecture
2016-08-28 05:42:06 -04:00
redfish 57ca3f3f64 make: make the ARM release targets statically linked
I think, in this context, dynamically linked builds make sense
only for native builds, not these builds that target arch
families to produce portable binaries.
2016-08-28 05:35:27 -04:00
redfish a0d40587ea Revert "makefile: remove unnecessary ARM-specific targets"
This reverts commit ecd0f2dde7.

These targets that are not native builds. They are for builds
portable within processors of a given family.

'make release' used to not work to build a native build on ARM, but that
has been fixed. These targets are unrelated to the native build.
2016-08-28 02:10:52 -04:00
Jacob Torrey e0bf02a6ce Streamline release-test target
When Travis builds and tests, time is limited per build, so the overhead of re-calling CMake can push it over the limit.
2016-08-26 14:06:35 -06:00
Jacob Torrey 256dec0601 Streamline test building target
Signed-off-by: Jacob Torrey <discipleofranok@gmail.com>
2016-08-26 14:03:27 -06:00
redfish ecd0f2dde7 makefile: remove unnecessary ARM-specific targets
* NO_AES is determined automatically
* BUILD_64 is determined automatically
2016-06-23 17:01:31 -04:00
Riccardo Spagni de03926850
updated copyright year 2015-12-31 08:39:56 +02:00
NoodleDoodleNoodleDoodleNoodleDoodleNoo e5d2680094 ** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).

Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.

LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5

ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.

[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
   This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.

[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
	a. 0 = Compute long hash per block (may take a while depending on CPU)
	b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
	a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
	b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
	Fast    - Write meta-data but defer data flush.
	Fastest - Defer meta-data and data flush.
	Sync    - Flush data after nblocks_per_sync and wait.
	Async   - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
        Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
	Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
	For berkeley-db only. Auto remove logs if enabled.

**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
	At the moment, you need a full resync to use this optimized version.

[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.

Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block

**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop,  Quad-core / 8-threads 2600k  (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop,   Dual-core / 4-threads U4200  (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).

lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop,  Quad-core / 8-threads 2600k  (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).

berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k  (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).

berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-15 23:20:16 -07:00
Riccardo Spagni e01d32e52d
cleaning up, removing redundant files, renaming, fixing incorrect licenses 2015-05-31 13:40:18 +02:00
Riccardo Spagni d39d9e5186
fixed static windows makefile targets 2015-04-09 08:10:11 +02:00
Riccardo Spagni 7d8acd1c45
explicitly disable AES on ARM 2015-04-06 14:14:45 +02:00
Riccardo Spagni 4222b372e4
add arm6 target and flags 2015-04-06 14:00:09 +02:00
Riccardo Spagni 5675325769
new makefile targets for static builds 2015-04-06 13:05:30 +02:00
Riccardo Spagni 9b3673a54c
added portable slow-hash, updated makefile targets, fixed readme 2015-01-27 09:43:15 +02:00
Riccardo Spagni ac19084480 revert the removal of the 'arch' flag from the release-static target 2014-12-13 13:48:28 +02:00
Riccardo Spagni 685dd4a5d3
don't build tests unless we're building all-* or *-test builds 2014-12-01 20:00:22 +02:00
Riccardo Spagni d97191d4f9
new Makefile target: release-static 2014-09-15 08:18:11 +02:00
monero-project 9c70be0e77 prompt to delete build directory on 'make clean' 2014-04-30 13:07:00 -04:00
Antonio Juarez 296ae46ed8 moved all stuff to github 2014-03-03 22:07:58 +00:00