- New flag in NOTIFY_NEW_TRANSACTION to indicate stem mode
- Stem loops detected in tx_pool.cpp
- Embargo timeout for a blackhole attack during stem phase
A newly synced Alice sends a (typically quite small) list of
txids in the local tpxool to a random peer Bob, who then uses
the existing tx relay system to send Alice any tx in his txpool
which is not in the list Alice sent
This allows flushing internal caches (for now, the bad tx cache,
which will allow debugging a stuck monerod after it has failed to
verify a transaction in a block, since it would otherwise not try
again, making subsequent log changes pointless)
If the peer (whether pruned or not itself) supports sending pruned blocks
to syncing nodes, the pruned version will be sent along with the hash
of the pruned data and the block weight. The original tx hashes can be
reconstructed from the pruned txes and theur prunable data hash. Those
hashes and the block weights are hashes and checked against the set of
precompiled hashes, ensuring the data we received is the original data.
It is currently not possible to use this system when not using the set
of precompiled hashes, since block weights can not otherwise be checked
for validity.
This is off by default for now, and is enabled by --sync-pruned-blocks
2cd4fd8 Changed the use of boost:value_initialized for C++ list initializer (JesusRami)
4ad191f Removed unused boost/value_init header (whyamiroot)
928f4be Make null hash constants constexpr (whyamiroot)
The original intent of one false positive a week on average
was not met, since what we really want is not the probability
of having N blocks in T seconds, but either N blocks of fewer
in T seconds, or N blocks or more in T seconds.
Some of this could be cached since it calculates the same fairly
complex floating point values, but it seems pretty fast already.
The 10 minute one will never trigger for 0 blocks, as it's still
fairly likely to happen even without the actual hash rate changing
much, so we add a 20 minute window, where it will (for 0 blocks)
and a one hour window.
This curbs runaway growth while still allowing substantial
spikes in block weight
Original specification from ArticMine:
here is the scaling proposal
Define: LongTermBlockWeight
Before fork:
LongTermBlockWeight = BlockWeight
At or after fork:
LongTermBlockWeight = min(BlockWeight, 1.4*LongTermEffectiveMedianBlockWeight)
Note: To avoid possible consensus issues over rounding the LongTermBlockWeight for a given block should be calculated to the nearest byte, and stored as a integer in the block itself. The stored LongTermBlockWeight is then used for future calculations of the LongTermEffectiveMedianBlockWeight and not recalculated each time.
Define: LongTermEffectiveMedianBlockWeight
LongTermEffectiveMedianBlockWeight = max(300000, MedianOverPrevious100000Blocks(LongTermBlockWeight))
Change Definition of EffectiveMedianBlockWeight
From (current definition)
EffectiveMedianBlockWeight = max(300000, MedianOverPrevious100Blocks(BlockWeight))
To (proposed definition)
EffectiveMedianBlockWeight = min(max(300000, MedianOverPrevious100Blocks(BlockWeight)), 50*LongTermEffectiveMedianBlockWeight)
Notes:
1) There are no other changes to the existing penalty formula, median calculation, fees etc.
2) There is the requirement to store the LongTermBlockWeight of a block unencrypted in the block itself. This is to avoid possible consensus issues over rounding and also to prevent the calculations from becoming unwieldy as we move away from the fork.
3) When the EffectiveMedianBlockWeight cap is reached it is still possible to mine blocks up to 2x the EffectiveMedianBlockWeight by paying the corresponding penalty.
Note: the long term block weight is stored in the database, but not in the actual block itself,
since it requires recalculating anyway for verification.
This will trigger if a reorg is seen. This may be used to do things
like stop automated withdrawals on large reorgs.
%s is replaced by the height at the split point
%h is replaced by the height of the new chain
%n is replaced by the number of new blocks after the reorg
b6534c40 ringct: remove unused senderPk from ecdhTuple (moneromooo-monero)
7d375981 ringct: the commitment mask is now deterministic (moneromooo-monero)
99d946e6 ringct: encode 8 byte amount, saving 24 bytes per output (moneromooo-monero)
cdc3ccec ringct: save 3 bytes on bulletproof size (moneromooo-monero)
f931e16c add a bulletproof version, new bulletproof type, and rct config (moneromooo-monero)
The blockchain prunes seven eighths of prunable tx data.
This saves about two thirds of the blockchain size, while
keeping the node useful as a sync source for an eighth
of the blockchain.
No other data is currently pruned.
There are three ways to prune a blockchain:
- run monerod with --prune-blockchain
- run "prune_blockchain" in the monerod console
- run the monero-blockchain-prune utility
The first two will prune in place. Due to how LMDB works, this
will not reduce the blockchain size on disk. Instead, it will
mark parts of the file as free, so that future data will use
that free space, causing the file to not grow until free space
grows scarce.
The third way will create a second database, a pruned copy of
the original one. Since this is a new file, this one will be
smaller than the original one.
Once the database is pruned, it will stay pruned as it syncs.
That is, there is no need to use --prune-blockchain again, etc.
aee7a4e3 wallet_rpc_server: do not use RPC data if the call failed (moneromooo-monero)
1a0733e5 windows_service: fix memory leak (moneromooo-monero)
0dac3c64 unit_tests: do not rethrow a copy of an exception (moneromooo-monero)
5d9915ab cryptonote: fix get_unit for non default settings (moneromooo-monero)
d4f50cb1 remove some unused code (moneromooo-monero)
61163971 a few minor (but easy) performance tweaks (moneromooo-monero)
30023074 tests: slow_memmem now returns size_t (moneromooo-monero)
This avoids the miner erroring out trying to submit blocks
to a core that's already shut down (and avoids pegging
the CPU while we're busy shutting down).
5808530f blockchain: remove unused output_scan_worker parameter (moneromooo-monero)
1426209a blockchain: don't run threads if we have just one function to run (moneromooo-monero)
6f7a5fd4 db_lmdb: slight speedup getting array data from the blockchain (moneromooo-monero)
99fbe100 db_lmdb: save some string copies for readonly db keys/values (moneromooo-monero)
bf31447e tx_pool: speed up take_tx for transactions from blocks (moneromooo-monero)
4f005a77 tx_pool: remove unnecessary get_transaction_hash (moneromooo-monero)
593ef598 perf_timer: call reserve on new timer array (moneromooo-monero)
6ecc99ad core: avoid unnecessary tx/blob conversions (moneromooo-monero)
00cc1a16 unit_tests: notify test special case for the usual weirdo (moneromooo-monero)
To help protect one's privacy from traffic volume analysis
for people using Tor or I2P. This will really fly once we
relay txes on a timer rather than on demand, though.
Off by default for now since it's wasteful and doesn't bring
anything until I2P's in.
149da42 db_lmdb: enable batch transactions by default (stoffu)
34cb6b4 add --regtest and --fixed-difficulty for regression testing (vicsn)
9e1403e update get_info RPC and bump RPC version (vicsn)
207b66e first new functional tests (vicsn)
on_generateblocks RPC call combines functionality from the on_getblocktemplate and on_submitblock RPC calls to allow rapid block creation. Difficulty is set permanently to 1 for regtest.
Makes use of FAKECHAIN network type, but takes hard fork heights from mainchain
Default reserve_size in generate_blocks RPC call is now 1. If it is 0, the following error occurs 'Failed to calculate offset for'.
Queries hard fork heights info of other network types
luigi1111
Lee Clagett
moneromooo-monero
Aaron Hook
Alexander Blair
wowario
JamesWrigley
Howard Chu
Jesus Ramirez
Riccardo Spagni
binaryFate
Martijn Otto
xiphon
victorsintnicolaas