HTILE is supported on these chips, not sure how I missed that.
This restores using PFP_SYNC_ME when LOAD_CONTEXT_REG is not used.
Fixes: f425d9ee74 ("radv: use LOAD_CONTEXT_REG when loading fast clear values")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This avoids syncing the Micro Engine. This is only supported
for VI+ currently. There is probably a way for using
LOAD_CONTEXT_REG on previous chips but that could be done later.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
If the user gives 0 counterBuffers then the driver should still
enable transform feedback on all targets. This changes the
driver to always enable xfb, and use counter buffers where
one is defined for the target in question.
Fixes: b4eb029062 (radv: implement VK_EXT_transform_feedback)
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
In order to handle pause/resume properly, the offset should
be added to the buffer binding not to the begin/end paths.
v2: don't add offset to size
Fixes ext_transform_feedback-alignment* under zink
Fixes: b4eb029062 (radv: implement VK_EXT_transform_feedback)
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This implementation should work and potential bugs can be
fixed during the release candidates window anyway.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Since the CPU can read them we need to execute any GPU->CPU
flushes before the event is written.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108524
Fixes: f4e499ec79 "radv: add initial non-conformant radv vulkan driver"
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This makes it cheaper to just change the dynamic offsets with
the same descriptor sets.
Suggested-by: Philip Rebohle <philip.rebohle@tu-dortmund.de>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
It shouldn't be needed to emit the initial graphics or compute
state when beginning a new command buffer. Emitting them in
the preamble should be enough and this will reduce IB sizes.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Let say, we first bind a graphics pipeline that needs indirect
descriptors sets. The userdata pointers will be emitted at draw
time. Then if we bind a compute pipeline that doesn't need any
indirect descriptors, the driver will re-emit them for all
grpahics stages.
To avoid this to happen, just check the bind point type.
CC: 18.2 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
It's actually just the opposite.
This fixes the new Sascha conditionalrender demo.
CC: 18.2 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Otherwise they are not exported.
CC: 18.2 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Dave Airlie <airlied@redhat.com
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Single-sample color and single-sample depth (not stencil)
are coherent with shaders.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl
We have to do a fast-clear eliminate when clearing DCC
metadata with 0x20202020. I don't know if that fixes anything
but that seems correct to me.
CC: 18.2 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This was missing when VK_EXT_conditional_rendering has been
implemented. The predication type should be -1 to avoid
restoring previous state when performing a decompression pass
with DCC enabled.
Note that we don't have to handle secondary command buffers
because we don't support this feature currently.
CC: 18.2 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
If we have tracing enabled we could do all the tracing emits
and overflow the precalculated cdw_max.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
The driver might emit up to 4 dwords when RADV_TRACE_FILE is
used.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This wasn't wrong but it looks better to me like this. It's
only used for debugging purposes (ie. RADV_TRACE_FILE).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The goal is to use radv_barrier()/radv_subpass_barrier() as
much as possible for further optimizations.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Inherited commands buffers are not supported.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
VK_EXT_conditional_rendering allows to discard draw commands
(not only normal draws).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
VK_EXT_conditional_rendering allows to discard dispatch commands.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
We don't need to emit PS_PARTIAL_FLUSH for the pre fragment shader
stages (ie. geometry/tessellation). Emitting VS_PARTIAL_FLUSH
is enough for these stages. Note that PS_PARTIAL_FLUSH also
synchronizes all vertex stages.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
If we know that the given image doesn't have any metadata,
we don't need to flush.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Now that 'set' can't be NULL because the meta operations no
longer bind a NULL descriptor, the logic can be simplified
a little bit.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
I don't want to waste CPU cycles for nothing.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
We mostly use the same priority for all buffer objects, so
I don't think that matter much. This should reduce CPU
overhead a little bit.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
A ZPASS_DONE or PIXEL_STAT_DUMP_EVENT (of the DB occlusion
counters) must immediately precede every timestamp event to
prevent a GPU hang on GFX9.
Cc: 18.1 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
VkCreateRenderPass2KHR() is quite similar to VkCreateRenderPass()
but refactoring the code is a bit painful.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Needed for VK_KHR_create_renderpass2.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This might fix some synchronization issues. I don't know if
that will affect performance but it's required for correctness.
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
That might reduce CPU overhead a little bit when using
RADV_TRACE_FILE.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The number of enabled descriptors for a given pipeline stage
can be computed at compile time.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
For merged shaders, VS as HS for example.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
If the given image doesn't enable CMASK, FMASK or DCC that's
useless to flush CB metadata.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
If the given image doesn't have HTILE, that's useless to flush
DB metadata.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
GCC 4.8 fails to compile with "static const", while GCC 8.1
fails to compile with only "static".
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Always emitting a bottom-of-pipe event is quite dumb. Instead,
start to optimize these functions by syncing PFP for the
top-of-pipe and syncing ME for the post-index-fetch event.
This can still be improved by emitting EOS events for
syncing PS and CS stages.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This introduces radv_barrier() (same as the draw/dispatch codepath).
This helper is used for merging the code from CmdWaitEvents() and
CmdPipelineBarrier because it's quite similar.
We do ignore the source stage mask for CmdWaitEvents because
it's irrelevant when event objects are used.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The Vulkan spec says:
"pipelineBindPoint is a VkPipelineBindPoint indicating whether
the descriptors will be used by graphics pipelines or compute
pipelines. There is a separate set of bind points for each of
graphics and compute, so binding one does not disturb the other."
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Samuel Pitoiset
Dave Airlie
Bas Nieuwenhuizen
Marek Olšák