We have some cases where in subpass we want the layer but having
it be 0 and loaded in the frag shader without the vertex shader
exporting it is fine.
So don't export the layer if we don't have a value to put in it.
Fixes: d4c74aed7a (radv/multiview: mark layer_input if we have input attachments.)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
If a shader only writes to an output via a constant initializer we
need to lower it before we call nir_remove_dead_variables so that
this pass sees the stores from the initializer and doesn't kill the
output.
Fixes test failures in new work-in-progress CTS tests:
dEQP-VK.spirv_assembly.instruction.graphics.variable_init.output.float
This is ported from anv:
99b57daf4a anv/pipeline: lower constant initializers on output variables earlier
from Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
For multiview we need to emit a number of sequential queries
depending on the view mask.
This avoids dEQP-VK.multiview.queries.15 waiting forever
on the CPU for query results that are never coming.
We only really want to emit one query,
and the rest should be blank (amdvlk does the same),
so we emit begin/end pairs for all the others except
the first query.
v2: fix tests
v3: split out patch.
Fixes: dEQP-VK.multiview.queries*
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This just splits out the begin/end query hw emissions,
it makes it easier to add multiview support for queries.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This fixes:
dEQP-VK.multiview.input_attachments*
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Since the intermediate states of active_stages are not used,
i.e. active_stages is read only after all stages were set into it,
just set its value before compiling the shaders.
This will allow to conditionally run certain passes based on what
other shaders are being used, e.g. a certain pass might only be
applicable to the vertex shader if there's no geometry or tessellation
shader being used.
v2: Use vk_to_mesa_shader_stage. (Lionel)
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This change allows the disk shader cache to work with programs loaded
with ProgramBinary. Drivers check for LINKING_SKIPPED, and if set,
then they try to use the shader cache.
Since the program loaded by ProgramBinary is similar to loading the
shader from the disk cache, this is probably more appropriate.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Currently, we only look in the disk shader cache if we see that the
shader program is in the cache during the link step.
If the shader cache entry isn't found during the program link, there
are still some (fairly unlikely) scenarios where later it might be
useful to search the cache for gen binary programs.
1. If the cache evicts the serialized glsl cache, there might still be
valid gen program entries in the disk cache.
2. If two applications are running in parallel, then it is possible
that one may write out the cached gen program item which the other
application can then make use of.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
When the shader cache is used, this can be generated. In fact, the
shader cache uses this sha1 to lookup the serialized GL shader
program.
If a GL shader program is restored with ProgramBinary, the shaders are
not available, and therefore the correct sha1 cannot be generated. If
this is restored, then we can use the shader cache to restore the
binary programs to the program that was loaded with ProgramBinary.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
We used this to prevent usage of the disk shader cache when transform
feedback was enabled via the GL API. This is no longer used.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105444
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
The fragment shader was trying to read this, but nothing
was exporting it from the vertex shader. This handles
it like the prim id export.
Fixes:
dEQP-VK.multiview.secondary_cmd_buffer.*
dEQP-VK.multiview.index.fragment_shader.*
v1.1: updated to use 0x1 (Samuel)
Fixes: e3265c10c8 (radv: Implement multiview draws.)
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
There was a missing absolute value when
checking if the determinant was big enough.
Fixes: https://github.com/iXit/Mesa-3D/issues/292
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
CC: "17.3 18.0" <mesa-stable@lists.freedesktop.org>
Stateblocks with NINESBT_ALL should track all textures.
For better performance they have a faster path which
copies all the required.
This path was only tracking ps textures.
Fixes: https://github.com/iXit/Mesa-3D/issues/303
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
CC: "17.3 18.0" <mesa-stable@lists.freedesktop.org>
An incorrect formula was used to compute bound_samplers_mask_vs.
Since s is above always 8 for vs and the variable is encoded on 8 bits,
it was always 0.
This resulted in commiting the samplers every call when
there was at least one texture read in the vs shader.
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
We only get VK_SUCCESS if it was initialized, but apparently my compiler
doesn't track that far.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
We only have a cfg != NULL if we went through one of the paths that set
it, but my compiler doesn't figure that out.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 6411defdcd ("intel/cs: Re-run final NIR optimizations for each SIMD size")
This is a legitimate warning: if anv's blorp_alloc_binding_table() throws
an error from anv_cmd_buffer_alloc_blorp_binding_table(), we silently
continue to use this undefined value. The rest of this code doesn't seem
very allocation-error-proof, though, either.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Previously the unit test filled out a minimal devinfo struct. A previous
patch caused the test to begin assert failing because the devinfo was
not complete. Avoid this by using the real mechanism to create devinfo.
Note that we have to drop icl from the table, since we now rely on the
name -> PCI ID translation done by gen_device_name_to_pci_device_id(),
and ICL's PCI IDs are not upstream yet.
Fixes: f89e735719 ("intel/compiler: Check for unsupported register sizes.")
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
I'm not sure everyone wants to be updating their dri3 in a forced
march setting, this allows a nicer approach, esp when you want
to build on distro that aren't brand new.
I'm sure there are plenty of ways this patch could be cleaner,
and I've also not built it against an updated dri3.
For meson I've just left it alone, since if you are using meson
you probably don't mind xcb updates, and if you are using meson
you can fix this better than me.
v3: just don't put a version in for dri3/present without
modifiers, should allow building with 1.11 as well
(feel free to supply meson followups)
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
(Ported from radeonsi commit f70f6baaa3)
Allows cached BOs to be reused in more cases.
Bugzilla: https://bugs.freedesktop.org/105171
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Make sure we don't emit 64 bit types if the hardware doesn't support
them.
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Suggested-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
We're already including it in the meson build. This fixes build issues
on systems which have a drm_fourcc.h that doesn't have modifiers.
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Implement the eglSwapinterval for Android platform to
enable the async mode for some GFX benchmarks such as
Daimler C217, CityBench.
Results of the dEQP-EGL.*swap_interval tests
'dEQP-EGL.functional.query_config.get_config_attrib.max_swap_interval'..
'dEQP-EGL.functional.query_config.get_config_attrib.min_swap_interval'..
'dEQP-EGL.functional.choose_config.simple.selection_only.max_swap_interval'..
'dEQP-EGL.functional.choose_config.simple.selection_only.min_swap_interval'..
'dEQP-EGL.functional.choose_config.simple.selection_and_sort.max_swap_interval'..
'dEQP-EGL.functional.choose_config.simple.selection_and_sort.min_swap_interval'..
'dEQP-EGL.functional.negative_api.swap_interval'..
Test run totals:
Passed: 7/7 (100.0%)
Failed: 0/7 (0.0%)
Not supported: 0/7 (0.0%)
Warnings: 0/7 (0.0%)
Signed-off-by: Zhongmin Wu <zhongmin.wu@intel.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
[Emil Velikov: polish inline comment, add dEQP stats, s/dpy/disp/]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reuse the tgis helper and remove a bunch of duplicated code.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This way we can utilise it with later patches.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Instead of indirectly pulling the wayland headers everywhere, use
forward declarations and #include only as needed.
Should effectively fix build errors like the following:
make[5]: Entering directory
'/.../src/gallium/state_trackers/omx/tizonia'
CC h264dprc.lo
In file included from h264dprc.c:45:0:
.../src/egl/drivers/dri2/egl_dri2.h:47:10: fatal error:
wayland/wayland-egl/wayland-egl-backend.h: No such file or directory
#include "wayland/wayland-egl/wayland-egl-backend.h"
Cc: Dylan Baker <dylan@pnwbakers.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Tested-by: Andy Furniss <adf.lists@gmail.com>
During development the version was bumped, yet the comment did not get
an update.
Fixes: c80c08e226 ("vulkan/wsi/x11: Add support for DRI3 v1.2")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Use the handy macro instead of hard coded numbers.
Fixes: c80c08e226 ("vulkan/wsi/x11: Add support for DRI3 v1.2")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
According to OpenGL ES 3.2, section 8.6, CopyTexSubImage* should return
an INVALID_OPERATION if the internalformat of the texture is RGB9_E5.
This fixes
dEQP-GLES31.functional.debug.negative_coverage.*.copytexsubimage2d_texture_internalformat.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
This pass moves load UBO operations just before their first use,
loosely based on nir_opt_move_comparisons.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This removes the other geometry specific user sgpr.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This drops one of the geometry specific user sgprs,
we can work this out at compile time.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This moves the lds_size calcs into the shader so we have all
the size stuff in one file.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This drops the now unneeded scanning and results in favour
of the ones in the info.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>