Finally LAVA users will be able to see deqp XMLs on failures from the
job's artifacts browser. This replaces a couple of one-off minio uploads
in the piglit runner.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10297>
For baremetal CI we are using a 'dummy' rootfs as it is required by
abootimg. This causes NFS boot problems when using u-boot as bootloader.
[ 13.230968] RAMDISK: gzip image found at block 0
[ 13.235645] using deprecated initrd support, will be removed in 2021.
[ 13.243106] List of all partitions:
If we disable CONFIG_BLK_DEV_INITRD nfsroot works.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10024>
They're not warning-clean yet, but we can enable -Werror in general and
just allow the existing types of warnings as exceptions with
-Wno-error=[...]. This way, new warnings of all other types will be
prevented from entering the code base.
Once all warnings of a certain type have been eliminated in a job, the
exception for that type can be dropped from that job. This provides a
realistic path to a fully warning-clean CI build in the future.
v2:
* Use echo -n (Juan A. Suarez)
Reviewed-by: Eric Anholt <eric@anholt.net> # v1
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10220>
This is possible again thanks to
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9955 , and
this MR requires rebuilding all templates based docker images anyway,
so we can pull in the latest templates for free.
We need to exclude /dev/* when unpacking rootfs tarballs for the
arm_test image, since x86 container build jobs do not allow mknod
anymore with current templates. The baremetal test jobs have another
filesystem mounted on /dev anyway.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9833>
Among other things, this gets us GCC 10 (was 6).
Requires some changes to third party components we use:
* Install apitrace (& waffle) from Debian; was hitting issues with the
local build, and it's the same version 9.0 anyway.
* Update Fossilize to a newer commit which builds with GCC 10.
* apt.llvm.org repositories are no longer needed.
* Use an SPIRV-LLVM-Translator commit which builds with LLVM 11.0.1.
* Install XCB packages from Debian, 1.13 fails to build with Python 3.9.
* Install wayland-protocols from Debian, 1.12 is too old for
libgtk-3-dev in bullseye.
LLVM 7/8 packages are no longer available.
Also adapt expected test results to Xvfb now exposing multi-samle
GLXFBConfigs.
v2:
* Install clang instead of clang-11.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/3124
Reviewed-by: Eric Anholt <eric@anholt.net> # v1
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9833>
v2:
- Bump up MESA_ROOTFS_TAG instead of arm_build (Michel)
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10136>
So far we were using a telnet-based script to communicate with the PoE
Switch to turn on/off the network ports the DUTs are connected.
But this script does not seem very reliable because from time to time the
switch fails to execute the steps in the script.
As the PoE Switch we use is a smart one with support for SNMP protocol,
it would be easier to use it to handle it, which allows to turn on/off
the ports without going through the nasty telnet steps
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9954>
libpciaccess-dev:$arch from STABLE_EPHEMERAL down to the main list of packages
in .gitlab-ci/container/cross_build.sh, and bumping the arm_build, i386_build,
ppc64el_build & s390x_build tags again.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Suggested-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
----
.gitlab-ci.yml | 8 ++++----
.gitlab-ci/container/cross_build.sh | 2 +-
2 files changed, 5 insertions(+), 5 deletions(-)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10095>
This allows to fix some credential leaks and provides compatibility with
the latest LAVA version.
Avoids failures when the LAVA instance returns Error 500
Signed-off-by: Corentin Noël <corentin.noel@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9851>
After a recent LAVA update, failures in running a test would cause the
whole test to be retried. We only want for the boot to be retried (in
case of infrastructuer errors), so set the nr of retries for tests to 1.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9950>
The test timeout shouldn't be bigger than the whole job's timeout.
Also, reduce the timeouts to a more sane level and remove timeouts that
don't bring value.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9950>
Works around the other Missing case we've seen in CI, possibly fixes the
underlying issue, and adds support for comments in xfails lists.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9806>
The merged image contains kernels & rootfs for both arm64 & armhf
baremetal test jobs, and is smaller than either arm{64,hf}_test image
before.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9955>
Doing so in an x86 container via qemu was slow, and started failing
recently after updating to a newer qemu version.
This also results in smaller arm*_test* docker images, since we need to
install fewer Debian packages in them.
As a bonus, this turns some piglit tests from fail to pass (Or maybe
they'll turn out to be flakes? They've passed at least 3 times in a
row).
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9955>
We use the CI-built kernel+rootfs these days. I haven't bumped image tags
because the files are definitely unused, and I'm rebuilding it all in the
next commit.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9955>
Waffle building requires libgl1-mesa-dev to add support for GLX. This
package is pulled automatically in arm64 container as a suggested
package, but no in armhf. Which means we end up having support for GLX
in waffle in arm64 but not in armhf.
Thus let's install explicitly this package to have support in both
cases.
Reviewed-by: Andres Gomez <agomez@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9562>
Without a way to exclude specific subdirectories, keeping the list
of all subdirectories which need to be tested is error prone.
It's better to run CI slightly more often than to miss it when
it is needed.
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9609>
Getting piglit to fit onto our test devices was proving difficult, and we
need the ability to handle flakes, so switch to the rust piglit runner
that @pepp wrote as part of the deqp-runner repo which gives us flake
detection, sharding across boards, fractional runs, and almost half the
runtime.
It doesn't handle piglit subtests yet, but if you can't run piglit's
python on your devices because it's too bloated and unstable, this is a
way forward.
Reviewed-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9468>
This adds a piglit runner that we'll be using on freedreno, better
xfail/unexpectedpass handling for some cases (Missing->Pass, Warn->Warn),
better error logging for the Missing issue we've had in CI, a fix for a
source of Missing, and a pile more unit tests.
As a result, we now catch that the Missing results for a bunch of our
tests have gone away.
Reviewed-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9468>
As Windows now builds llvmpipe and lavapipe, we should be sure to run
their builds when these change.
Acked-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9518>
Keep the strace logs in job artifacts for tests which timed out.
This can be useful for figuring out why a timeout occurred.
strace cannot be used in jobs where ASAN is enabled, because ASAN's
leak checker also uses ptrace(), which isn't possible within strace.
Suggested-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9472>
Eric Anholt
Christian Gmeiner
Michel Dänzer
Juan A. Suarez Romero
Jesse Natalie
Leo Liu
Corentin Noël
Tomeu Vizoso
Matt Turner
Mike Blumenkrantz
Daniel Stone
Danylo Piliaiev