v2: Add all the Y21x tests to the A530 expected fail list. All of the
YUV image import tests fail on this platform, and nobody has been able
to investigate why.
v3: Update the comment describing the zeroed bits in Y212. Suggested by
Emma.
v4: Add all Y21x test to the rpi3 expected fail list.
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9610>
v2: Don't leak __DRI_IMAGE_FOURCC_RGBA16161616 to applications.
v3: Fix typo in __DRI_IMAGE_FOURCC_RGBA16161616 table entry.
v4: Add the Y412 and Y416 tests to the A530 expected fail list. Many
YUV image import tests fail on this platform, and nobody has been able
to investigate why.
v5: Update the comment describing the zeroed bits in Y412. Suggested by
Emma.
v6: Add all Y41x test to the rpi3 expected fail list.
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9610>
We had re-enabled this because of some test regressions:
KHR-GLES31.core.geometry_shader.limits.max_input_components and
ext_transform_feedback-max-varyings failed to register allocate,
but now that we support indirect indexing on vertex shader outputs natively
this is no longer an issue.
Piglit's max-samplers tests failed. These tests use indirect indexing
on samplers which is not supported and fail to link with this error message:
"Failed to link: error: sampler arrays indexed with non-constant expressions
is forbidden in GLSL 110". This is expected. The reason these were passing
before is that loop unrolling was able to turn indirect indexing into
direct indexing. We add them to the expected fail list.
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10723>
Add
dEQP-VK.synchronization.op.single_queue.binary_semaphore.write_copy_buffer_read_ssbo_compute.buffer_16384
to the flake list.
v2:
- Add a new flake (jasuarez)
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10479>
Most of the regressions we found are with the piglit testsuite. The
difference between executing all tests versus quick_gl + quick_shader
are minimal, in the sense that we would need the same number of jobs to
execute and be in the 10 minutes budget.
Hence replace "quick_gl" + "quick_shader" by "all".
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10378>
Among other things, this gets us GCC 10 (was 6).
Requires some changes to third party components we use:
* Install apitrace (& waffle) from Debian; was hitting issues with the
local build, and it's the same version 9.0 anyway.
* Update Fossilize to a newer commit which builds with GCC 10.
* apt.llvm.org repositories are no longer needed.
* Use an SPIRV-LLVM-Translator commit which builds with LLVM 11.0.1.
* Install XCB packages from Debian, 1.13 fails to build with Python 3.9.
* Install wayland-protocols from Debian, 1.12 is too old for
libgtk-3-dev in bullseye.
LLVM 7/8 packages are no longer available.
Also adapt expected test results to Xvfb now exposing multi-samle
GLXFBConfigs.
v2:
* Install clang instead of clang-11.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/3124
Reviewed-by: Eric Anholt <eric@anholt.net> # v1
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9833>
v2:
- Bump up MESA_ROOTFS_TAG instead of arm_build (Michel)
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10136>
Somewhat terrifyingly, we never sent this for direct contexts, which
means the server never knew the context/drawable bindings. To handle
this sanely, pull the request code up out of the indirect backend, and
rewrite the context switch path to call it as appropriate. This
attempts to preserve the existing behavior of not calling unbind() on
the context if its refcount would not drop to zero.
Of course, you can't just do this indiscriminately, because this is GLX
and extant X servers have bugs and everything is terrible. To wit:
- For 1.20.x prior to 1.20.6, you can bind a direct context once, but
the second time you try to modify the context's binding you will get
GLXBadContextTag. This includes unbinding the context. And "deleting"
the context will leak memory, because it will still appear to be
current.
- For 1.19 and earlier, glXMakeCurrent(dpy, None, ctx) should be legal
for GL 3.0+ contexts, but the server will throw BadMatch.
To guard against this, we only send the request for indirect contexts
unless the server is known good, and only mention one context at a time
in such a request; if switching between contexts, we first unbind the
old, and then bind the new. Note that the second VendorRelease() version
is to catch XFree86 4.x and Xorg [67].x, which almost certainly have the
above bugs. Other servers might report different version numbers here,
but we can't do direct rendering against them, so this should be safe.
Fixes: mesa/mesa#4418
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9992>
The merged image contains kernels & rootfs for both arm64 & armhf
baremetal test jobs, and is smaller than either arm{64,hf}_test image
before.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9955>
Doing so in an x86 container via qemu was slow, and started failing
recently after updating to a newer qemu version.
This also results in smaller arm*_test* docker images, since we need to
install fewer Debian packages in them.
As a bonus, this turns some piglit tests from fail to pass (Or maybe
they'll turn out to be flakes? They've passed at least 3 times in a
row).
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9955>
There is margin in the time budget to run the full GLES3 and GLES31 CTS
instead of only 50%.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9899>
Switch from the old piglit to the new piglit-runner executor.
Acked-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9680>
This increases the coverage adding tests that require an X server to
run.
Update also the expected results, and skip some flake tests.
Reviewed-by: Andres Gomez <agomez@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9562>
So far, testing VC4 and V3D/V3DV requires the CI runners having access
to a Raspberry Pi 3/4 kernel, and the correspondent modules and
bootloader files. If a different kernel must be used, it means touching
the runners to provide them.
This commit adds the option to define an URL pointing to a (compressed)
tarball containing such files, without requiring dealing with the
runners. This link is provided through the `BM_BOOTFS` job variable.
The tarball must contain two directories in the root: a `/boot`
directory (containing the kernel, DTBs and bootloader files), and a
`/lib/modules` (or `/usr/lib/modules`) with the kernel modules.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9527>
It's just a ton of fuss for driver developers fixing piglit tests. This
makes the trace expectation files pretty silly (empty expectation, but
you'll get a diff to a non-empty result when something fails)
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Acked-by: Adam Jackson <ajax@redhat.com>
Acked-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9226>
Split the piglit jobs in multiple parallel executions to speed up the
runtime.
v2:
- Set parallel in V3D piglit jobs.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9022>
This allows to split a piglit job in several parallel jobs, to speed up
the execution.
Due piglit restrictions, this only works for single profiles. Otherwise
an error will be shown in the runner.
Also, a new gitlab job variable `PIGLIT_TESTS` is introduced that
contains the excluded/included tests with `-x` or `-n`. The rest of the
piglit options go to `PIGLIT_OPTIONS` (like `--timeout n`).
v2 (Andres):
- Replay profile is supported in parallel jobs.
- Bail out inmediately if parallel jobs is tried with multiple
profiles.
- Use testlist only when doing parallel jobs.
- Do not drop pass tests when filtering executed tests.
- Get rid of PIGLIT_FRACTION.
v4:
- uncommit unrelated change (Andres).
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9022>
This means less custom test-source-dep stuff for these drivers, though it
means that touching the CI expects files will cause a bit more retesting:
- broadcom drivers retest as a group (but Igalia requested that
organization of CI files)
- radv+radeonsi retest as a group
- lvp+llvmpipe retest as a group
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9161>
The top-level gitlab-ci.yml is big and unwieldy when one wants to work on
CI for a single driver. Move the drivers to separate include files for
ease of finding all your driver's tests, and also to pave the way for work
on a single driver's CI to not retest all other drivers.
Reviewed-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9139>