This driver does no transformation of the gallium calls
going to the real driver, like the identity matrix. It is
intended to be the basis for transforming and/or debug
drivers like trace and rbug.
Authors of this patch are:
Michal Krol, orignal heavy lifting.
José Fonesca, object wrapping code stolen from trace.
Jakob Bornecrantz, put it all toghether and renamed a stuff.
Fix mklib to deal with NOPREFIX and use --enable-auto-image-base for cygwin
Teach configure.ac some basic facts about cygwin
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Now that the dlopen wrappers are built into libmesa.a, we need to link
standalone libOSMesa with libdl to resolve dlopen and friends on
platforms that need it.
(cherry picked from commit 4795dd5950)
Now that the dlopen wrappers are built into libmesa.a, we need to link
standalone libOSMesa with libdl to resolve dlopen and friends on
platforms that need it.
The special feature of bin/minstall to copy symlinks is only ever needed
when installing libraries which may have .so symlinks. All the headers
and directories can use a normal install program.
These two modes are separated as $(INSTALL) and $(MINSTALL) to allow the
user (or autoconf) to override installing normal files as they please.
An autoconf check for the install program has been added and will be
used in preference to minstall when available.
Fixes bug 16053.
Here is a couple of fixes for GNU/Hurd:
- dri_interface.h: no libdrm support either.
- configure.ac:
- GNU/Hurd is a GNU OS with _GNU_SOURCE and PTHREADS.
- GNU needs a couple of flags like other OSes
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Move flags for linking standard C/C++ libraries from configure.ac to mklib
Use -norunpath flag when linking with Sun C++ compiler
Convert mklib -exports list into a linker mapfile
Set FINAL_LIBS correctly when -noprefix is used
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
This catches the linux-uclibc case and any others that were being set
prior to 98fcdf3f. Fixes bug 20345.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
This rewrites the sparc GLAPI code so that it's PIC friendly and works
with all of the TLS/PTHREADS/64-bit/32-bit combinations properly.
As a result we can turn SPARC asm back on. Currently it's only
enabled on Linux, as that's the only place where I can test this
stuff out.
For the moment the cliptest SPARC asm routines are disabled as they
are non-working. The problem is that they use register %g7 as a
temporary which is where the threading libraries store the thread
pointer on SPARC. I will fix that code up in a future change as it's
a pretty important routine to optimize.
Like x86 we do the runtime patch as a pthread once-invoked initializer
in init_glapi_relocs().
Unlike x86, however, our GLAPI stubs on SPARC are just two instruction
sequences that branch to a trampoline and put the GLAPI offset into a
register. The trampoline is what we run-time patch. The stubs thus
all look like:
glFoo:
ba __glapi_sparc_foo_stub
sethi GLAPI_OFFSET(glFOO) * PTR_SIZE, %g3
This actually makes generate_entrypoint() a lot simpler on SPARC. For
this case in generate_entrypoint() we generate stubs using a 'call'
instead of the 'ba' above to make sure it can reach.
In order to get a proper tail call going here, in the unpatched case,
we do several tricks. To get the current PC, for example, we save the
return address register into a temporary, do a call, save the return
address register written by the call to another temporary, then
restore the original return address register value. This is to
avoid having to allocate a stack frame.
This is necessary for PIC address formation.
This new GLAPI scheme lets us get rid of the ugly SPARC GLAPI hacks in
__glXInitialize() and one_time_init().
Signed-off-by: David S. Miller <davem@davemloft.net>
It is only the i965simple pipe driver that was broken
in the gallium-texture-transfere merge that is being
disabled, mothing more nothing less.
FYI, there never where working i965 hardware support
in gallium anyways.
Commit 90b2beb661 changed the assembly
variables. Without this change, the glapi assembly wasn't being built
when it was supposed to, resulting in missing symbols in libGL.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
This is not the proper approach to disabling assembly. If there are bugs,
they should be fixed or the assembly can default to off.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
On newer GCC releases, the compiler's headers have been split between
the include and include-fixed directories. Add both if the directories
exist.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Julien Cristau <jcristau@debian.org>
The pkg-config files have been filled in more thoroughly to allow users
to use mesa more effectively. By adding metadata to Requires.private,
Libs.private and Cflags, we can ensure that all the libraries and
headers will be found in all situations. However, the full substitutions
are only done when using the configure script.
This also fixes the glu pkg-config file to account for using GL or
OSMesa.
Fixes bug 18161.
Add an --enable-motif option, which will enable the Motif widgets in
libGLw and link it with libXm. The Motif installation information will
be gathered from the motif-config script (this comes with LessTif) or
fallback to the standard autoconf checks.
To allow the location of the Motif headers to be set from configure, the
default setting of -I/usr/include/Motif1.2 has been moved into
configs/default and then passed to the Makefile through the MOTIF_CFLAGS
variable.
Establish the shell that make will use from configure. This is exactly
how autoconf/automake operate, with the environment variable
CONFIG_SHELL respected to override the autoconf checks. In the usual
case where the user just executes `./configure', autoconf will pick a
shell from the current shell, sh, bash, ksh or sh5 that meets its base
criteria.
The special Solaris case of looking for a POSIX shell has been changed
to just set the SHELL variable since autoconf substitutes this already.
The EXTRA_CONFIG_LINES substitution is dropped as it should no longer be
needed.
The documentation in autoconf.html is much more explicit about how the
different configure options control the build. This adds a notice at the
end of the `./configure --help' output to tell the user about it.
Explicitly allow the argument to --with-dri-drivers to contain
comma-separated or space-separated drivers. A space-separated driver
list worked by chance before.
Currently the installation directories for libraries and headers are
resolved within the install commands. For instance, the libraries will
be installed to $(INSTALL_DIR)/$(LIB_DIR). This limits the flexibility
of the installation, such as when the libraries should be installed to a
subdirectory like /usr/lib/tls.
This adds the make variables $(INSTALL_LIB_DIR) and $(INSTALL_INC_DIR)
to define the locations that the libraries and headers are installed.
For the static configs, this resolves exactly as before to
$(INSTALL_DIR)/include and $(INSTALL_DIR)/$(LIB_DIR). For autoconf, they
are derived directly from the --libdir and --includedir settings.
The architecture- and platorm-specific settings were scattered
throughout the configure script. This moves them near the beginning
before any of the driver-specific settings.
I'll release a libdrm 2.3.1 without TTM apis included from a special
drm branch that should allow mesa 7.1 to build against it.
I've had to turn off DRI2 stuff.
Since the only valid consumer of the DRI drivers is the X.Org xserver,
this changes the default DRI driver directory to match xorg-server:
${libdir}/dri. The old default of /usr/X11R6/modules/dri was wrong for
nearly all current systems.
This commit adds an autoconf macro, MESA_PIC_FLAGS, which sets the
PIC flags according to platform and static/shared setting. The platform
specifics are taken straight from libtool.m4 and stripped down to just
the flags and platforms we cover in Mesa. This should hopefully make it
possible to use autoconf on non-GCC platforms.
The macro is added external to configure.ac in acinclude.m4 since it's
pretty bloated.
Note to BSDers: Previously, x86 defaulted to non-PIC on FreeBSD. I
didn't carry that preference into this macro. Instead, you can just use
--disable-pic where desired.
Two fixes to the asm configuration:
- Disable when the user is cross-compiling for x86 or x86_64 since it
requires running an executable compiled for the target host.
- If the user has specified --enable-32-bit on x86_64 or --enable-64-bit
on x86, respect that and choose the correct asm architecture.
The DRI modules can only be built against libdrm master (currently
version 2.3.1), so this should be enforced to save people from trying to
build against older versions.
Added a section at the top of the script to consolidate all required
versions.
The variable no_x was being set to yes when libX11 was not found through
pkg-config. This causes AC_PATH_XTRA to skip its search for the X11
libraries, which was not the intended effect. Also switched to using the
PKG_CHECK_EXISTS autoconf macro.
Added the make script version.mk to print the various version numbers
from configs/default. This is used to substitute the version in autoconf
rather than duplicating it in both places.
Since the autoconf config inherits from default, we don't need to
duplicate and substitute the MESA_* version numbers in configure.ac.
The version number is only needed in configure for the help text.
The autoconf macro AC_PATH_PROGS handles the case of searching for
multiple program names already, so we don't need to open code it. Also
changed the search to AC_CHECK_PROGS so that it doesn't set the full
path unless the user specified. Finally, report back the found value at
the end for what the user should run.
Add DRI2 direct rendering support to libGL and add DRI2 client side
protocol code. Extend the GLX 1.3 create drawable functions in
glx_pbuffer.c to call into the DRI driver when possible.
Introduce __DRIconfig, opaque struct that represents a DRI driver
configuration. Get's rid of the open coded __GLcontextModes in the
DRI driver interface and the context modes create and destroy
functions that the loader was requires to provide. glcore.h is no
longer part of the DRI driver interface. The DRI config is GL binding
agnostic, that is, not specific to GLX, EGL or other bindings.
The core API is now also an extension, and the driver exports a list
of extensions as the symbol __driDriverExtensions, which the loader
must dlsym() for. The list of extension will always include the DRI
core extension, which allows creating and manipulating DRI screens,
drawables and contexts. The DRI legacy extension, when available,
provides alternative entry points for creating the DRI objects that
work with the XF86DRI infrastructure.
Change DRI2 client code to not use drm drawables or contexts. We
never used drm_drawable_t's and the only use for drm_context_t was as
a unique identifier when taking the lock. We now just allocate a
unique lock ID out of the DRILock sarea block. Once we get rid of the
lock entirely, we can drop this hack.
Change the interface between dri_util.c and the drivers, so that the
drivers now export the DriverAPI struct as driDriverAPI instead of the
InitScreen entry point. This lets us avoid dlsym()'ing for the DRI2
init screen function to see if DRI2 is supported by the driver.
Rather than constructing the GCC include path from `-print-search-dirs',
we can get the path directly from `-print-file-name=include'. This is
used in the Linux kernel build, for example. If no output is returned
from the command, then we don't append a -I path the the makedepend
options.
The platform-specific overrides to the DRI drivers were being ignored
because the default was being set first. Instead, have the default be a
fallback after the platform checks.
The conditional in src/mesa/Makefile currently hardcodes the cases where
libOSMesa can be built on libGL. Likewise, the xlib case always includes
libOSMesa in the stand-alone target.
This changes the conditional to a loop over the DRIVER_DIRS variable.
This means that any driver configuration can enable or disable osmesa.
The current "stand-alone" rule is changed so that DRIVER_DIRS=x11 and
DRIVER_DIRS="x11 osmesa" are both respected.
The configure option is changed to --enable-gl-osmesa as this change
allows libOSMesa to be built upon any of the libGL-enabling drivers.
Two new configure options to add -m32 or -m64 to the CFLAGS and CXXFLAGS
when GCC is in use. By default, the user supplied options are
environment variables are respected, but these options are quick helps
for the common case of x86/x86_64 using GCC.
Changed the text for the default demos to be "auto" instead of "yes"
since that didn't make much sense in this context. Added an example
value for the --with-dri-drivers option as suggested by Brian.
Allow the user to disable use of assembly code through the --disable-asm
option. This is only relevant on the platforms where assembly is
normally enabled such as Linux and FreeBSD.
Allow the user to set the compiler debug flags and macros through the
option --enable-debug. This addes -DDEBUG to the macros and -g to the
CFLAGS and CXXFLAGS if gcc and g++ are in use.
Added a check that PKG_PROG_PKG_CONFIG is defined before calling it so
the user can see a proper error. Without it, the generated configure
script will just pass on to the next statement and bomb with a strange
shell syntax error.
Rather than having the user run `make autoconf' and have the Makefile
setup the configs/current -> autoconf symlink, we can just do that in
configure. This allows the user to just run `make' to build.
The user can request specific DRI drivers to build rather than the
default of "all that build on this platform". This allows the list of
drivers to be easily slimmed down.
This is controlled through the option --with-dri-drivers. For example:
./configure --with-driver=dri --with-dri-drivers="i965,nouveau"
Unfortunately, using this setting means the DRI drivers aren't filtered
by platform anymore and you might try to build something that doesn't
work.
Allow the user to specify that they want static libraries through the
--{enable,disable}-{static,shared} switches like libtool. The mesa build
only allows for one at a time, so static will be chosen if someone has
passed --enable-static or --disable-shared.
This also allows the mklib options to be set at build time. This allows
-static to be set for mklib, but any platform specific settings are
allowed by setting MKLIB_OPTIONS for configure.
Handling of the program libraries through the APP_LIB_DEPS variable is
pretty ugly, but it seems to work.
The user can request specific demos directories to build in. For
example:
./configure --with-demos="demos,xdemos"
The drawback is that we don't check for the necessary libararies in
that case, only that the directory in progs/ exists.
Allow the user to specify channel bits of 16 or 32 to enable OSMesa16 or
OSMesa32 instead of the default OSMesa. This option is controlled
through the option --with-osmesa-bits=BITS and is only honored when the
driver is osmesa.
The osdemos are not enabled in the 16 or 32 bit case because the
Makefile is currently hardcoded to link to -lOSMesa.
Added autoconf support for using OSMesa as the driver instead linking
it to libGL. This is enabled through --with-driver=osmesa.
To differentiate these cases, another option --enable-x11-osmesa is used
to enable or disable building OSMesa when the driver is x11.
Added autoconf bits to allow using DRI as the driver through the option
--with-dri-driver=DRIVER. The options are x11 (default) and dri. Three
DRI specific options for controlling the driver directory, direct
rendering and TLS are also added.
The DRI will probably not work for platforms besides linux and freebsd.
This adds the initial support for using autoconf configuration. Support
is available for shared Xlib driver builds. Later this will be extended
to dri and osmesa-only builds and possibly targetting non-X backends.
Support for static library builds will also be added.
The configure script fills in the autoconf config. This is then used by
running `make autoconf' after ./configure.
Testing has been done on Linux/GNU. The configure script tries to
faithfully reproduce the current configs/linux* and configs/freebsd*.
Other platforms can be handled later by adding similar statements and
feature tests.
Pkg-config is used to search for packages when possible. This makes the
build much more flexible and robust to the user's configuration. This
requires that the pkg-config autoconf macros pkg.m4 are included in
aclocal.m4. This requires autoconf and aclocal from autoconf and
automake, respectively.
Alex Deucher
Brian Paul
Michel Dänzer
Jakob Bornecrantz
Dave Airlie
Jon TURNEY
Ben Skeggs
Dan Nicholson
Jerome Glisse
Samuel Thibault
Dave Airlie
Robert Noland
Alan Coopersmith
Joel Bosveld
David S. Miller
Siddhartha Chaudhuri
Julien Cristau
Kristian Høgsberg
RALOVICH, Kristóf
Florent Thoumie
George Sapountzis
Eric Anholt
Hasso Tepper
Adam Jackson