Older drivers will not expect any flags from the
GBM front-end when modifiers are in use, and will
likely fail the allocation or handle them
incorrectly as a result. Only specify usage flags
when allocating from a backend with an ABI >= 1,
as that's the ABI version that added support for
specifying usage flags along with modifiers.
Fixes: ad50b47a14 ("gbm: assume USE_SCANOUT in create_with_modifiers")
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/5709
Signed-off-by: James Jones <jajones@nvidia.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14049>
gbm_{bo,surface}_create_with_modifiers doesn't allow callers to
pass usage flags. Assume USE_SCANOUT since this is what most
callers want.
Bump the GBM ABI version so that other backends can discover when
the usage flags can be used.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: James Jones <jajones@nvidia.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3197>
gbm_{bo,surface}_create_with_modifiers is missing the usage flags. Add a new
function which lets library users specify it.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: James Jones <jajones@nvidia.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3197>
We were sometimes using "usage", sometimes using "flags". Let's
just use "flags" everywhere (since the enum is named gbm_bo_flags).
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: James Jones <jajones@nvidia.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3197>
Define a version number for the interface GBM uses
to offload work to its backends/drivers. Store the
version in the backend interface structs provided
to the loader by backends, as well as in the core
interface struct provided to backends by the GBM
loader code to backends.
The backend can create structures of any version
it supports, which can be greater or less than the
interface version specified by GBM in the core
interface structure. Hence, GBM will need to take
care to check the backend version before accessing
any members added to structs defined in
gbm_backend_abi.h after this change.
Similarly, the backend may need to check the
interface version supported by the GBM library
before passing back data in any structure members
that require the GBM library to interact with
them for correct operation. For example, if for
some reason a structure defined in
gbm_backend_abi.h gained a field which was a
pointer to memory allocated by the backend and
freed by GBM, the backend should avoid allocating
this memory if the GBM library did not specify an
interface version new enough to indicate that it
was aware of the new structure member.
Signed-off-by: James Jones <jajones@nvidia.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9902>
The GBM core/loader code defines one helper
function used by both itself and the built-in DRI
backend. Presumably, external backend authors
would want to use such functions as well, so
package them into a single struct that will be
passed explicitly to externally loaded backends in
subsequent changes.
Another option considered was to simply export
the gbm_format_canonicalize() function directly,
optionally renaming it to better indicate it is
intended only for "internal" use first. However,
even with a rename, this would expose it to
potential use by applications as well, which is
not ideal, as it is not intended to be part of
the application-facing GBM ABI.
Signed-off-by: James Jones <jajones@nvidia.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9902>
This will be used for looking up the backend
again at destruction time to perform any backend-
agnostic cleanup. To facilitate that, also
dispatch device destruction to the backend manager
code.
Signed-off-by: James Jones <jajones@nvidia.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9902>
This commit adds a new gbm_bo_get_fd_for_plane function, which does the
same as gbm_bo_get_fd but allows specifying the plane.
v2: - Rename to gbm_bo_get_fd_for_plane (Emil)
Signed-off-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5442>
Drivers (Gallium, i965) expose a linear view of the buffer via
gbm_bo_map.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5238>
Define and set a new loader cap DRI_LOADER_CAP_FP16, indicating that gbm can
handle fp16 formats.
Signed-off-by: Kevin Strasser <kevin.strasser@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
- Add GBM_BO_IMPORT_FD_MODIFIER to documentation of supported foreign
object types
- Add newline before documentation block
- Improve language
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
gbm_bo_create() was presumably meant to originally accept gbm_bo_format
enums, but it's accepted GBM_FORMAT_* tokens since the dawn of time.
This is good, since gbm_bo_format is rarely used and covers a lot less
ground than GBM_FORMAT_*.
Change the documentation to refer to both; this involves removing a 'see
also' for gbm_bo_format, since we can't also use \sa to refer to a
family of anonymous #defines.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
This requires that the caller make a little (stack) allocation to store
the string.
v2: Use gbm_format_canonicalize (suggested by Daniel)
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This allows the user to query the number of planes required by a given
format+modifier combination without having to create a bo or surface.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This fixes the misspelling of gbm_bo_import api param.
Signed-off-by: Mun Gwan-gyeong <elongbug@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The actual offset returned is uint32_t, however int64_t was used as the
return type from gbm_bo_get_offset to allow negative returns to signal
errors to the caller.
In case of an error getting the offset, the user will also be unable to
get the handle/FD, and thus have nothing to offset into. This means that
returning 0 as an error value is harmless, allowing us to change the
return type to uint32_t in order to avoid signed/unsigned confusion in
callers.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
This patch originally had i965 specific code and was named:
commit 61cd3c52b868cf8cb90b06e53a382a921eb42754
Author: Ben Widawsky <ben@bwidawsk.net>
Date: Thu Oct 20 18:21:24 2016 -0700
gbm: Get modifiers from DRI
To accomplish this, two new query tokens are added to the extension:
__DRI_IMAGE_ATTRIB_MODIFIER_UPPER
__DRI_IMAGE_ATTRIB_MODIFIER_LOWER
The query extension only supported 32b queries, and modifiers are 64b,
so we needed two of them.
NOTE: The extension version is still set to 13, so none of this will
actually be called.
v2: Error handling of queryImage (Emil)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The idea behind modifiers like this is that the user of GBM will have
some mechanism to query what properties the hardware supports for its BO
or surface. This information is directly passed in (and stored) so that
the DRI implementation can create an image with the appropriate
attributes.
A getter() will be added later so that the user GBM will be able to
query what modifier should be used.
Only in surface creation, the modifiers are stored until the BO is
actually allocated. In regular buffer allocation, the correct modifier
can (will be, in future patches be chosen at creation time.
v2: Make sure to check if count is non-zero in addition to testing if
calloc fails. (Daniel)
v3: Remove "usage" and "flags" from modifier creation. Requested by
Kristian.
v4: Take advantage of the "INVALID" modifier added by the GET_PLANE2
series.
v5: Don't bother with storing modifiers for gbm_bo_create because that's
a synchronous operation and we can actually select the correct modifier
at create time (done in a later patch) (Jason)
v6: Make modifier condition outside the check so that dri_use will work
properly (Jason)
Cc: Kristian Høgsberg <krh@bitplanet.net>
References (v4): https://lists.freedesktop.org/archives/intel-gfx/2017-January/116636.html
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> (v1)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Daniel Stone <daniels@collabora.com>
Unlike stride, there was no previous offset getter, so it can be right
on the first try.
v2: Return EINVAL when plane is greater than total planes to make it
match the similar APIs.
Avoid leak after fromPlanar (Daniel)
Make sure when getting offsets we consider dumb images (Daniel)
v3: Use Jason's recommendation for handling the non-planar case.
v4: Return int64_t so we can get real errors
v5: Add an assertion for dumb BOs (Jason)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Daniel Stone <daniels@collabora.com>
v2: Preserve legacy behavior when plane is 0 (Jason Ekstrand)
EINVAL when input plane is greater than total planes (Jason Ekstrand)
Don't leak the image after fromPlanar (Daniel)
Move bo->image check below plane count preventing bad index succeeding (Daniel)
v3: Fix DRIimage leak (using Jason's recommended change)
Make plane 0 return planar stride. This might break legacy behavior (Jason)
v4: Move bogus hunk for get_handle_for_plane to the right patch (Jason)
Fix error handling path to be cleaner (Jason)
v5: Add assert for dumb BOs to make sure plane == 0 (Jason)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> (v1)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Daniel Stone <daniels@collabora.com>
This will be used so we can query information per plane.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Daniel Stone <daniels@collabora.com>
v2: Make the error return be -1 instead of 0 because I think 0 is
actually valid.
v3: Set errno to EINVAL when the specified plane is above the total
planes. (Jason Ekstrand)
Return the bo's handle if there is no image ie. for dumb images like cursor (Daniel)
v4:
- Add assertions about plane == 0 (Jason)
- Add a comment about new restriction on planar dumb bo which is not an
earlier patch in the series.
- Correctly refactor from v2 in this patch; it ended up rebased into the
wrong patch.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Daniel Stone <daniels@collabora.com>
This will be used by clients that need to know the number of planes
allocated for them on behalf of the GL or other API. The best current
example of this is when an extra "plane" is allocated to store
compression data for the primary plane.
v2: Return 1 for cases where there is no image, ie. dumb bo (Daniel)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Daniel Stone <daniels@collabora.com>
v2: Other way round... to make consistent, make both return type have
the fixed width - uint32_t.
Cc: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Other things are out of order, but I need to add a getter so I'm just
fixing those.
This helps people adding to GBM know where the right place to put things
is.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Acked-by: Daniel Stone <daniels@collabora.com>
The gbm_device_get_backend_name() provides an (somewhat) internal name
of the implementation/backend used. Is has nothing to do with the udev,
one cannot and should not attempt to derive the name from it.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Change gbm_dri_bo_get_fd to check the return value of queryImage and
return -1 (an invalid file descriptor) if an error occurs.
Update the comment for gbm_bo_get_fd to return -1, since (apart from the
above) we've already return -1 on error.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Nicholas Bishop <nbishop@neverware.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> (v1)
[Emil Velikov: Split from larger patch, polish coding style, cc stable]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
e7c8c85785 ("gbm: Removed unused function.") forgot to remove
the global array used only by that function.
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
AFAICT, it's never been used.
It was briefly nudged in the right direction here:
commit 10e5ffd496
Author: Emil Velikov <emil.l.velikov@gmail.com>
Date: Sat Jan 25 17:19:10 2014 +0000
gbm: do not export _gbm_mesa_get_device
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Kristian H. Kristensen <hoegsberg@chromium.org>
Clean up misrepetitions ('if if', 'the the' etc) found throughout the
comments. This has been done manually, after grepping
case-insensitively for duplicate if, is, the, then, do, for, an,
plus a few other typos corrected in fly-by
v2:
* proper commit message and non-joke title;
* replace two 'as is' followed by 'is' to 'as-is'.
v3:
* 'a integer' => 'an integer' and similar (originally spotted by
Jason Ekstrand, I fixed a few other similar ones while at it)
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>
The build systems already add this as applicable. There's no need to
have this in the source file.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The build systems already add this as applicable. There's no need to
have this in the source file.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
This adds map and unmap functions to GBM utilizing the DRIimage extension
mapImage/unmapImage functions or existing internal mapping for dumb
buffers. Unlike prior attempts, this version provides a region to map and
usage flags for the mapping. The operation follows the same semantics as
the gallium transfer_map() function.
This was tested with GBM based gralloc on Android.
Signed-off-by: Rob Herring <robh@kernel.org>
[Emil Velikov: drop no longer relevant hunk from commit message.]
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
glibc 2.19 introduced _DEFUAULT_SOURCE as a replacement for _BSD_SOURCE,
and deprecates _BSD_SOURCE with an annoying warning. Defining both is
how you're supposed to transition so let's do that. It gets rid of the
warning and we can figure out when/if we can drop _BSD_SOURCE later.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
GBM_BO_USE_CURSOR_64X64 is kept so that existing users of GBM continue to
build, but it no longer rejects widths or heights other than 64.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79809
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
This should give the caller some information of what called the error.
For the gbm_bo_import() case, for instance, it is possible to know if
the import is not supported or the error was caused by an invalid
parameter.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Manuel Stoeckl
Xaver Hugl
James Jones
Simon Ser
Kevin Strasser
Heinrich
Daniel Stone
Eric Anholt
Jason Ekstrand
Eric Engestrom
Eric Engestrom
Gwan-gyeong Mun
Ben Widawsky
Emil Velikov
Nicholas Bishop
Matt Turner
Gurkirpal Singh
Giuseppe Bilotta
Emil Velikov
Rob Herring
Kristian Høgsberg
Michel Dänzer
Ander Conselvan de Oliveira