This logic is not device-specific. It is pulled from our existing Bifrost image
implementation and will be reused for Valhall.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15795>
Valhall removed the ability to set an explicit primitive restart index as
required by desktop OpenGL, in favour of fixed primitive restart indices only as
required by OpenGL ES.
Set the CAPs accordingly so that mesa/st lowers unusual primitive restart
indices at draw call time.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15795>
The relevant data structures have been shuffled a bit. We need to wire up AFBC
for Valhall; however, that's out of scope for the initial bring up. Just hide it
so we can build.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15795>
Use a Bifrost compatible path. It's not clear this is optimal but it passes the
tests and is no worse than what we do on Bifrost.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15795>
Surface descriptors have been replaced by plane descriptors, which facilitate
the intermediate layout of textures. This allows for more sophisticated handling
of texture compressions, of particular to interest to copy_image. However, it
requires a considerable amount of new logic to handle.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15795>
Issue: When a video is decoded where the max_references is updated the
decoder keeps using same old value. This results into green patches and
decoding is not proper.
Root Cause: The max_references is updated only once when the instance is
created for the first time.
Fix: Added a check along with the context->decoder to check if the
context->templat.max_references has changed. If yes, then we go ahead
and create the decoder again.
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Krunal Patel <krunalkumarmukeshkumar.patel@amd.corp-partner.google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15750>
this is just the program-based handling, which means finding the right
variant and/or creating new ones based on matching a 32bit mask indicating
which textures must be rewritten
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15536>
this differs in that it doesn't handle images and also doesn't filter
based on sampler type, instead using a 32bit mask for determining which
samplers to rewrite
also zink doesn't use sampler derefs
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15536>
Based on hardware behaviour, it appears vertex_id is zero-based with the legacy
geometry flow but not with the new malloc IDVS flow. Since the geometry flow is
per-shader (not per-machine), there's not a good way to communicate this to NIR.
Rather than trying to shoehorn this obscure detail into NIR, just do the
lowering ourselves instead of in NIR. It's not much more code anyway.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15793>
Our swizzle lowering optimizations depend on replication of scalar fp16. This
holds on Bifrost (at least for now), but not on Valhall which has proper support
for write masks. For now, enforce Bifrost-compatible behaviour as we do not make
use of the write masks on Valhall yet.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15793>
Replace LOAD.ubo with LD_BUFFER since the .ubo segment doesn't exist on Valhall.
We could do this with a lowering pass instead but this is probably fine.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15793>
It is unclear if FP32 point sizes are supported on Valhall -- I can't get the
DDK to use them at any rate. Always lower them to FP16 and store them as FP16
for hardware use.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15793>
Varying stores was changed in Valhall. Rather than using attribute descriptors
like on Bifrost and Midgard, on Valhall we store to memory directly with
hardware-allocated buffers. This requires a new implementation of store_output,
with special provisions for writing gl_PointSize from a position shader.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15793>
Memory-allocated IDVS requires special varying load instructions that take an
offset into the hardware-allocated varying buffer, as opposed to a varying slot.
Emit these instructions.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15793>
This affects what instructions the fragment shader uses. Will be used for the
legacy geometry flow in blit shaders. Whether that is a good idea remains to be
seen, admittedly.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15793>
Valhall uses an updated version fo the TEXC path. To avoid disrupting the
existing Bifrost code, add a new Valhall-specific texture path that generates
the new-style texture instructions.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15793>
Fewer arguments compared to Bifrost; the corresponding information is encoded in
a Valhall-specific blend shader prologue instead.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15793>
On Bifrost, this is handled in the scheduler. Until we grow a Valhall scheduler,
add a NOP with the appropriate flow control. This is correct but carries a small
performance cost.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15793>
We need a slightly different idiom on Valhall, since the segment modifiers no
longer exist but we now have an immediate offset.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15793>
Something an instruction has two logic flow controls, namely wait + reconverge.
These are orthogonal -- we need to insert a NOP to handle this. Add a lowering
pass that works out flow control to replace the ad hoc previous va_pack_flow.
Fixes dEQP-GLES31.functional.ssbo.layout.single_basic_type.shared.lowp_vec3.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15756>
These use the attribute pipe, the new versions of LD_ATTR_TEX, but reading
texture descriptors instead of attribute descriptors unlike their Bifrost
predecessors.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15756>
Similar to pipeline statistics but done for a single counter.
We use REG_A6XX_RBBM_PRIMCTR_7 to get generated primitives
and not PRIMCTR_8 because PRIMCTR_7 counts pre-clipped prims
while PRIMCTR_8 counts them after clipping.
OpenGL spec for GL_PRIMITIVES_GENERATED says:
"Subsequent rendering will increment the counter once for every
vertex that is emitted from the geometry shader, or from the
vertex shader if no geometry shader is present."
Passes tests:
dEQP-VK.transform_feedback.primitives_generated_query.*
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15746>
It will be easier to merge dynamic states from libraries this way.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15764>
This has one negative side-effect; we're no longer able to print
validation errors without dxcompiler.dll. I doubt that's a real problem,
but if it is, we should add this ability to dxil_validator instead of
having a second implementation here.
The reasons I didn't try adding this in the first place is:
1. This code seems a bit janky; it doesn't consult the "known"-variable
to figure out if the encoding is OK, and it's lacking a fallback path
in that case.
2. It seems unlikely that the compiler varies the encoding of the output
in the first place; one of the two code-paths in here is probably
untested.
3. Since dxil_validator leaves reporting to the call-site, we'd need to
either add and output-encoding to the API (yuck), or re-encode the
string to UTF-8 using WinAPI.
Right now, it seems questionable if fixing all of the above is worth it.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15751>
This API is only available on Windows, which is the only OS where DXIL
validation is a requirement, and where DXIL.dll (and dxcompiler.dll) are
available.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15751>
by utilizing a separate slot map for patch variables, the entire i/o
assignment mechanism can be simplified to accurately manage i/o for all
types of variables and avoid location conflicts
affects:
KHR-Single-GL46.enhanced_layouts*
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15770>
Boris Brezillon
Jason Ekstrand
Jason Ekstrand
Alyssa Rosenzweig
Krunal Patel
Mike Blumenkrantz
Lionel Landwerlin
Danylo Piliaiev
Samuel Pitoiset
Adam Jackson
Erik Faye-Lund