The motivation is to allow llvmpipe to be enabled instead in the
meson-i386 job.
v2: (Eric Engestrom)
* Rename meson-main job to meson-gallium
* Remove stale comment above meson-i386 job
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4166>
Instead of using git, use python and the Gitlab API
to fetch traces. This helps us slim down our ramdisks
in preparation for integrating trace replay on LAVA
devices.
Signed-off-by: Rohan Garg <rohan.garg@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4000>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4000>
This supports powering up the device (using an external tool you
provide based on your particular lab), talking over serial to wait for
the fastboot prompt, and then booting a fastboot image on a target
device.
I was previously relying on LAVA for this, but that ran afoul of
corporate policies related to the AGPL. However, LAVA wasn't doing
too much for us, given that gitlab already has a job scheduler and
tagging and runners. We were spending a lot of engineering on making
the two systems match up, when we can just have gitlab do it directly.
Lightly-reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4076>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4076>
It was added with tracie, but it doesn't depend on it.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
For now tests only use these drivers:
* llvmpipe
* softpipe
* freedreno
* lima
* etnaviv
* panfrost
So using rules:changes gitlab feature to run the tests when the changes
made are potentially affecting these drivers.
A few notes:
* the following code:
.piglit-test:
extends:
- .test-gl
- .llvmpipe-rules
makes gitlab replace .test-gl "rules:changes" values by the one from
".llvmpipe-rules".
* rules:changes always matches for non-MR new branches so jobs will always be
created (and they'll be run if their dependencies are run). For pushes to
existing branches the files changed by the push are used to match the
rules:changes path.
* the same gitlab feature could be used for some build jobs
Acked-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2569>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2569>
RADV_FORCE_FAMILY forces creating a null device that allows RADV
to be instanced without AMDGPU.
The Fossilize database only contains pipelines from the Sascha
Vulkan triangle demos at the moment. I will add more once this
is merged.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3960>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3960>
It was diabled because RADV is the only driver that tests Vulkan
and running CTS on my personal machine and without recovery is
not safe enough for CI (too long and too unstable).
Now that we are going to test Fossilize with RADV, it's needed to
build the test image for VK unconditionally. As RADV now supports
creating NULL devices, the fossilize jobs can run everywhere.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3960>
Fossilize is equivalent to vkpipeline-db but it's definitely more
robust. This is based on the CI traces system.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3960>
The stages and mapping of jobs to them are somewhat arbitrary; the goal
is to avoid having to scroll through large numbers of jobs.
v2: (Pierre-Eric Pelloux-Prayer)
* Use even more stages for test jobs
* Give somewhat meaningful names to stages
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3995>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3995>
Also, adds an example job for radv.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
In preparation to having "vk" (Vulkan) along "gl" (OpenGL/ES).
This is so it is clearer which traces belong to which API and also for
the build jobs.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
In preparation for having automated testing with Vulkan traces.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
In preparation for having automated testing with Vulkan traces.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Since we are at it, replace "cd" with pushd / popd and homogenize how
VK-GL-CTS is built in comparison with other build scripts.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
This should get us better stability of the db410c boards by having a
smaller per-board software stack, with no disks involved (just initramfs).
Additionally, the new cluster is 7 (soon 8) db410cs, while currently the
docker cluster only has 1/4 of its db410cs still running.
Unfortunately, we have to prepare the fastboot boot image during the ARM
drivers build stage, because LAVA relies on publicly available URLs for
the images to load into the bootloaders of the boards, and the only thing
we have for that is gitlab's artifacts.
Note that this testing relies on the boards being freshly flashed with the
linaro v136 firmware to pick up the initramfs size fixes and to stop the
boot at fastboot.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3661>
I want to make sure that I don't introduce warnings in turnip where we
have active work going on, and I also want to make sure that the drivers
we care about testing are warnings-clean.
As with the previous -Werror change, this is for CI only and doesn't
affect end-user builds.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3607>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3607>
I'm working on moving the db410c CI from docker to LAVA, which means we
get to boot a custom kernel. To do that, we need to enable ARCH_QCOM in
the kernel, save the dtb around, and include abootimg in our container so
that we can generate combined kernel/dtb/ramdisk images for fastboot.
LAVA's fastboot support is unable to pack the overlay into an abootimg
image, just a cpio rootfs. We could flash the cpio rootfs after overlay
addition, but that takes 2 minutes to do, and causes wear on the devices.
Instead, we'll bring up the network at boot and use wget to fetch the
overlay. We'll want network support anyway, so that we can transfer the
failure xmls back to the gitlab job's artifacts at some point.
Since the msm GPU and realtek network firmware increase our payload by
3MB, add in firmware compression so that it doesn't waste as much RAM on
devices not using it.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3928>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3928>
The LLVM libraries were a significant fraction of the entire payload
(55M/250M uncompressed) into the initramfs of the test boards, but
LLVM is only used for the draw module used in select/feedback (which
isn't even tested in CI on ARM yet).
Assume that llvmpipe draw is safe enough for ARM given the coverage on
x86, and disable LLVM for these jobs.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3928>
radv needs libllvm which increases our ramdisk size
significantly. Since this driver is only build tested,
we can split it out into a separate job.
Signed-off-by: Rohan Garg <rohan.garg@collabora.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3928>
LAVA finds a '#' early in boot and races to emit its shell commands.
Apparently for the current boards those serial commands end up getting
buffered such that things work out, but for db410c and db820c, the buffer
is lost and LAVA gets stuck waiting for the prompt. By setting a prompt,
we can delay our commands until we're actually supposed to emit them (and
suppress a complaint from the lava dispatcher that we're using a risky
prompt!)
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3883>
Introduce automated testing of Mesa by replaying traces with Renderdoc
or Apitrace.
For now only LLVMPipe is tested, but other drivers can be tested if
there's runners with the necessary hardware.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2935>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2935>
Using LLVM 8 for ppc64el and 7 for s390x (which hits some coroutine
related issues with LLVM 8).
There are some test failures we need to ignore for now. Also, the
timeout needs to be bumped from the default 30s for some tests, because
they can take longer under emulation.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3643>
Among other things, this increases robustness when copying a docker
image from the main Mesa project to a forked project, avoiding spurious
image rebuilds from scratch.
Also drop the comment about .gitlab-ci/lava-gitlab-ci.yml, it doesn't
include the templates anymore.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3643>
I find warnings to be very disruptive to my workflow (using emacs's "go to
next error" feature), and I periodically have to go clean up other
people's drivers to get back to finding my own warnings in the noise. I
know I'm not the only one doing something like this.
We don't want to enable -Werror by default in builds, since it means that
end users will have builds spuriously fail based on what compiler version
and opt flags they have compared to what the devs are using. However, it
is quite easy to have CI ensure that we at least don't introduce warnings
on the compiler version that it uses.
For now I've just enabled it on meson-i386 to cover a bunch of Mesa core
and get us started on ratcheting up warnings-cleanliness in the tree,
without me having to fix up all the drivers at once.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3539>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3539>
Michel Dänzer
Rohan Garg
Tomeu Vizoso
Samuel Pitoiset
Eric Anholt
Andres Gomez
Pierre-Eric Pelloux-Prayer
Andres Gomez
Alexandros Frantzis
Dave Airlie
Fritz Koenig
Kristian H. Kristensen
Eric Engestrom