Set up new states that the blob started setting for GC3000 consistently.
This makes sure that when another test or driver leaves the GPU in
unpredictable state, these states are set up correctly for our
rendering.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Setting PA_VIEWPORT_UNK state correctly is necessary to make point sprite
rendering on GC3000 work.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
A two-component dot product instruction is supported with HALTI2, use it
on hardware that supports it.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Support opcodes with bit 6 set in assembler, and assert that only ops
0x00..0x7f are used.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
v2: - use -isystem`pwd` instead of cp to include fake linux header
(Eric E., Emil)
Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
In truth gtest is an external dependency that upstream expects you to
"vendor" into your own tree. As such, it makes sense to treat it more
like a dependency than an internal library, and collect it's
requirements together in a dependency object.
v2: - include with -isystem instead of setting compiler args (Eric)
Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
RadeonSI requires C++11, clover requires C++11, LLVM requires it, so
llvmpipe may require it, and that covers most of the C++ code in mesa.
Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Required for older versions of libelf that don't have a pkgconfig file.
Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
The kms_swrast extension is an actively developed software fallback,
and platform_surfaceless can use it if there are no available
hardware drivers.
v2: Split into 2 patches, use booleans, check LIBGL_ALWAYS_SOFTWARE,
and modify the eglLog level (Emil, Eric, Tomasz).
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
This will help us initialize a software driver, if it's needed
or requested.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
These shouldn't matter for non-cubes, and we always enable them all
for cubes, so we may as well set them all the time.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
I decided to use the one-boolean-per-cube-face approach because it's
clearer which bits correspond to which cube face.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
When this file is included by Gallium, the fprintf causes it to fail to
compile. This is an unreachable error case, and we shouldn't be calling
fprintf directly.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This file will be #included, so the functions should be static.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Imported from master (commit ef07298391c6dcad843e0b13e985090c1dd76e76)
of https://cgit.freedesktop.org/~mareko/libtxc_dxtn/
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
The dstOffset and fillSize parameters must be multiple of 4.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "17.1 17.2" <mesa-stable@lists.freedesktop.org>
The vkCmdFillBuffer() command fills a buffer with an uint32_t value.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "17.1 17.2" <mesa-stable@lists.freedesktop.org>
Use st_egl_image instead. radeonsi doesn't like when we create
a pipe_surface with PIPE_FORMAT_NV12.
This fixes NV12 texturing on radeonsi using kmscube.
Cc: 17.1 17.2 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This should be sufficient for testing all kernel/libdrm/radeonsi codepaths
that are used by radeonsi.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
We can implement ARB_indirect_parameters for i965 by
taking advantage of the conditional rendering mechanism.
This works by issuing maxdrawcount draw calls and using
conditional rendering to predicate each of them with
"drawcount > gl_DrawID"
Signed-off-by: Plamena Manolova <plamena.manolova@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
In order to add our ARB_indirect_parameters implementation we
need to refactor brw_try_draw_prims so that it operates on a
per primitive basis and move the loop into brw_draw_prims.
This commit refactors the brw_try_draw_prims function and
renames it to brw_draw_single_prim.
Signed-off-by: Plamena Manolova <plamena.manolova@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
In order to add our ARB_indirect_parameters implementation we
need to refactor brw_try_draw_prims so that it operates on a
per primitive basis and move the loop into brw_draw_prims.
This commit introduces the brw_finish_drawing function where
we move the code that executes once after the loop.
Signed-off-by: Plamena Manolova <plamena.manolova@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
In order to add our ARB_indirect_parameters implementation we
need to refactor brw_try_draw_prims so that it operates on a
per primitive basis and move the loop into brw_draw_prims.
This commit introduces the brw_prepare_drawing function where
we move the code that executes once before the loop.
Signed-off-by: Plamena Manolova <plamena.manolova@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
It's inside an if-statement that already checks that the variables are
not NULL.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
The optimization as done in opt_copy_propagation would have to be
removed in the next patch. If we just eliminate that optimization
altogether, shader-db results, even on platforms that use NIR, are hurt
quite substantially. I have not investigated why NIR isn't picking up
the slack here.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Instead of generating a sequence like:
run_default = true;
if (i == 3) // some label that appears after default
run_default = false;
if (i == 4) // some label that appears after default
run_default = false;
...
if (run_default) {
...
}
generate something like:
run_default = !((i == 3) || (i == 4) || ...);
if (run_default) {
...
}
This eliminates one use of conditional assignment, and it enables the
elimination of another.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Previously the instruction stream was walked looking for comparisons
with case-label values. This should generate nearly identical code.
For at least fs-default-notlast-fallthrough.shader_test, the code is
identical.
This change will make later changes possible.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
The values being compared are scalars, so these are the same. While
I'm here, simplify the run_default condition to just deref the flag
(instead of comparing a scalar bool with true).
There is a bit of extra change in this patch. When constructing an
ir_binop_equal ir_expression, there is an assertion that the types are
the same. There is no such assertion for ir_binop_all_equal, so
passing glsl_type::uint_type with glsl_type::int_type was previously
fine. A bunch of the code motion is to deal with that.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
This happens to work now because ir_binop_all_equal is used. This
causes vector typed init-expressions to produce scalar Boolean values
after comparison.
The next commit changes ir_binop_all_equal to ir_binop_equal. Vector
typed init-expressions will then produce vector Boolean values, and, in
debug builds, the ir_assignment constructor will fail an assertion.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>